From: Alex Elder <elder@inktank.com>
To: ceph-devel@vger.kernel.org
Subject: [PATCH 4/4] rbd: encapsulate last part of probe
Date: Tue, 30 Oct 2012 16:14:43 -0500 [thread overview]
Message-ID: <50904343.2020007@inktank.com> (raw)
In-Reply-To: <50904265.2050603@inktank.com>
Group the activities that now take place after an rbd_dev_probe()
call into a single function, and move the call to that function
into rbd_dev_probe() itself.
Signed-off-by: Alex Elder <elder@inktank.com>
---
drivers/block/rbd.c | 161
+++++++++++++++++++++++++++------------------------
1 file changed, 86 insertions(+), 75 deletions(-)
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index a8ad8f8..8d26c0f 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -3221,6 +3221,84 @@ out_err:
return ret;
}
+static int rbd_dev_probe_finish(struct rbd_device *rbd_dev)
+{
+ int ret;
+
+ /* no need to lock here, as rbd_dev is not registered yet */
+ ret = rbd_dev_snaps_update(rbd_dev);
+ if (ret)
+ return ret;
+
+ ret = rbd_dev_set_mapping(rbd_dev);
+ if (ret)
+ goto err_out_snaps;
+
+ /* generate unique id: find highest unique id, add one */
+ rbd_dev_id_get(rbd_dev);
+
+ /* Fill in the device name, now that we have its id. */
+ BUILD_BUG_ON(DEV_NAME_LEN
+ < sizeof (RBD_DRV_NAME) + MAX_INT_FORMAT_WIDTH);
+ sprintf(rbd_dev->name, "%s%d", RBD_DRV_NAME, rbd_dev->dev_id);
+
+ /* Get our block major device number. */
+
+ ret = register_blkdev(0, rbd_dev->name);
+ if (ret < 0)
+ goto err_out_id;
+ rbd_dev->major = ret;
+
+ /* Set up the blkdev mapping. */
+
+ ret = rbd_init_disk(rbd_dev);
+ if (ret)
+ goto err_out_blkdev;
+
+ ret = rbd_bus_add_dev(rbd_dev);
+ if (ret)
+ goto err_out_disk;
+
+ /*
+ * At this point cleanup in the event of an error is the job
+ * of the sysfs code (initiated by rbd_bus_del_dev()).
+ */
+ down_write(&rbd_dev->header_rwsem);
+ ret = rbd_dev_snaps_register(rbd_dev);
+ up_write(&rbd_dev->header_rwsem);
+ if (ret)
+ goto err_out_bus;
+
+ ret = rbd_init_watch_dev(rbd_dev);
+ if (ret)
+ goto err_out_bus;
+
+ /* Everything's ready. Announce the disk to the world. */
+
+ add_disk(rbd_dev->disk);
+
+ pr_info("%s: added with size 0x%llx\n", rbd_dev->disk->disk_name,
+ (unsigned long long) rbd_dev->mapping.size);
+
+ return ret;
+err_out_bus:
+ /* this will also clean up rest of rbd_dev stuff */
+
+ rbd_bus_del_dev(rbd_dev);
+
+ return ret;
+err_out_disk:
+ rbd_free_disk(rbd_dev);
+err_out_blkdev:
+ unregister_blkdev(rbd_dev->major, rbd_dev->name);
+err_out_id:
+ rbd_dev_id_put(rbd_dev);
+err_out_snaps:
+ rbd_remove_all_snaps(rbd_dev);
+
+ return ret;
+}
+
/*
* Probe for the existence of the header object for the given rbd
* device. For format 2 images this includes determining the image
@@ -3240,9 +3318,16 @@ static int rbd_dev_probe(struct rbd_device *rbd_dev)
ret = rbd_dev_v1_probe(rbd_dev);
else
ret = rbd_dev_v2_probe(rbd_dev);
- if (ret)
+ if (ret) {
dout("probe failed, returning %d\n", ret);
+ return ret;
+ }
+
+ ret = rbd_dev_probe_finish(rbd_dev);
+ if (ret)
+ rbd_header_free(&rbd_dev->header);
+
return ret;
}
@@ -3294,81 +3379,7 @@ static ssize_t rbd_add(struct bus_type *bus,
if (rc < 0)
goto err_out_rbd_dev;
- /* no need to lock here, as rbd_dev is not registered yet */
- rc = rbd_dev_snaps_update(rbd_dev);
- if (rc)
- goto err_out_probe;
-
- rc = rbd_dev_set_mapping(rbd_dev);
- if (rc)
- goto err_out_snaps;
-
- /* generate unique id: find highest unique id, add one */
- rbd_dev_id_get(rbd_dev);
-
- /* Fill in the device name, now that we have its id. */
- BUILD_BUG_ON(DEV_NAME_LEN
- < sizeof (RBD_DRV_NAME) + MAX_INT_FORMAT_WIDTH);
- sprintf(rbd_dev->name, "%s%d", RBD_DRV_NAME, rbd_dev->dev_id);
-
- /* Get our block major device number. */
-
- rc = register_blkdev(0, rbd_dev->name);
- if (rc < 0)
- goto err_out_id;
- rbd_dev->major = rc;
-
- /* Set up the blkdev mapping. */
-
- rc = rbd_init_disk(rbd_dev);
- if (rc)
- goto err_out_blkdev;
-
- rc = rbd_bus_add_dev(rbd_dev);
- if (rc)
- goto err_out_disk;
-
- /*
- * At this point cleanup in the event of an error is the job
- * of the sysfs code (initiated by rbd_bus_del_dev()).
- */
-
- down_write(&rbd_dev->header_rwsem);
- rc = rbd_dev_snaps_register(rbd_dev);
- up_write(&rbd_dev->header_rwsem);
- if (rc)
- goto err_out_bus;
-
- rc = rbd_init_watch_dev(rbd_dev);
- if (rc)
- goto err_out_bus;
-
- /* Everything's ready. Announce the disk to the world. */
-
- add_disk(rbd_dev->disk);
-
- pr_info("%s: added with size 0x%llx\n", rbd_dev->disk->disk_name,
- (unsigned long long) rbd_dev->mapping.size);
-
return count;
-
-err_out_bus:
- /* this will also clean up rest of rbd_dev stuff */
-
- rbd_bus_del_dev(rbd_dev);
-
- return rc;
-
-err_out_disk:
- rbd_free_disk(rbd_dev);
-err_out_blkdev:
- unregister_blkdev(rbd_dev->major, rbd_dev->name);
-err_out_id:
- rbd_dev_id_put(rbd_dev);
-err_out_snaps:
- rbd_remove_all_snaps(rbd_dev);
-err_out_probe:
- rbd_header_free(&rbd_dev->header);
err_out_rbd_dev:
rbd_dev_destroy(rbd_dev);
err_out_client:
--
1.7.9.5
next prev parent reply other threads:[~2012-10-30 21:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 21:11 rbd: wrap up of initialization rework Alex Elder
2012-10-30 21:14 ` [PATCH 1/4] rbd: don't pass rbd_dev to rbd_get_client() Alex Elder
2012-10-31 18:49 ` Josh Durgin
2012-10-30 21:14 ` [PATCH 2/4] rbd: consolidate rbd_dev init in rbd_add() Alex Elder
2012-10-31 20:53 ` Josh Durgin
2012-10-30 21:14 ` [PATCH 3/4] rbd: define rbd_dev_{create,destroy}() helpers Alex Elder
2012-10-31 20:56 ` Josh Durgin
2012-10-30 21:14 ` Alex Elder [this message]
2012-10-31 21:01 ` [PATCH 4/4] rbd: encapsulate last part of probe Josh Durgin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50904343.2020007@inktank.com \
--to=elder@inktank.com \
--cc=ceph-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox