From: Josh Durgin <josh.durgin@inktank.com>
To: Alex Elder <elder@inktank.com>
Cc: "ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>
Subject: Re: [PATCH REPOST 6/6] rbd: move remaining osd op setup into rbd_osd_req_op_create()
Date: Wed, 16 Jan 2013 20:23:33 -0800 [thread overview]
Message-ID: <50F77CC5.6070703@inktank.com> (raw)
In-Reply-To: <50E6F028.6040904@inktank.com>
On 01/04/2013 07:07 AM, Alex Elder wrote:
> The two remaining osd ops used by rbd are CEPH_OSD_OP_WATCH and
> CEPH_OSD_OP_NOTIFY_ACK. Move the setup of those operations into
> rbd_osd_req_op_create(), and get rid of rbd_create_rw_op() and
> rbd_destroy_op().
>
> Signed-off-by: Alex Elder <elder@inktank.com>
> ---
> drivers/block/rbd.c | 68
> ++++++++++++++++++++-------------------------------
> 1 file changed, 27 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
> index 9f41c32..21fbf82 100644
> --- a/drivers/block/rbd.c
> +++ b/drivers/block/rbd.c
> @@ -1027,24 +1027,6 @@ out_err:
> return NULL;
> }
>
> -static struct ceph_osd_req_op *rbd_create_rw_op(int opcode, u64 ofs,
> u64 len)
> -{
> - struct ceph_osd_req_op *op;
> -
> - op = kzalloc(sizeof (*op), GFP_NOIO);
> - if (!op)
> - return NULL;
> -
> - op->op = opcode;
> -
> - return op;
> -}
> -
> -static void rbd_destroy_op(struct ceph_osd_req_op *op)
> -{
> - kfree(op);
> -}
> -
> struct ceph_osd_req_op *rbd_osd_req_op_create(u16 opcode, ...)
> {
> struct ceph_osd_req_op *op;
> @@ -1087,6 +1069,16 @@ struct ceph_osd_req_op *rbd_osd_req_op_create(u16
> opcode, ...)
> op->cls.indata_len = (u32) size;
> op->payload_len += size;
> break;
> + case CEPH_OSD_OP_NOTIFY_ACK:
> + case CEPH_OSD_OP_WATCH:
> + /* rbd_osd_req_op_create(NOTIFY_ACK, cookie, version) */
> + /* rbd_osd_req_op_create(WATCH, cookie, version, flag) */
> + op->watch.cookie = va_arg(args, u64);
> + op->watch.ver = va_arg(args, u64);
> + op->watch.ver = cpu_to_le64(op->watch.ver); /* XXX */
why the /* XXX */ comment?
> + if (opcode == CEPH_OSD_OP_WATCH && va_arg(args, int))
> + op->watch.flag = (u8) 1;
> + break;
> default:
> rbd_warn(NULL, "unsupported opcode %hu\n", opcode);
> kfree(op);
> @@ -1434,14 +1426,10 @@ static int rbd_req_sync_notify_ack(struct
> rbd_device *rbd_dev,
> struct ceph_osd_req_op *op;
> int ret;
>
> - op = rbd_create_rw_op(CEPH_OSD_OP_NOTIFY_ACK, 0, 0);
> + op = rbd_osd_req_op_create(CEPH_OSD_OP_NOTIFY_ACK, notify_id, ver);
> if (!op)
> return -ENOMEM;
>
> - op->watch.ver = cpu_to_le64(ver);
> - op->watch.cookie = notify_id;
> - op->watch.flag = 0;
> -
> ret = rbd_do_request(NULL, rbd_dev, NULL, CEPH_NOSNAP,
> rbd_dev->header_name, 0, 0, NULL,
> NULL, 0,
> @@ -1450,7 +1438,8 @@ static int rbd_req_sync_notify_ack(struct
> rbd_device *rbd_dev,
> NULL, 0,
> rbd_simple_req_cb, 0, NULL);
>
> - rbd_destroy_op(op);
> + rbd_osd_req_op_destroy(op);
> +
> return ret;
> }
>
> @@ -1480,14 +1469,9 @@ static void rbd_watch_cb(u64 ver, u64 notify_id,
> u8 opcode, void *data)
> */
> static int rbd_req_sync_watch(struct rbd_device *rbd_dev, int start)
> {
> - struct ceph_osd_req_op *op;
> struct ceph_osd_request **linger_req = NULL;
> - __le64 version = 0;
> - int ret;
> -
> - op = rbd_create_rw_op(CEPH_OSD_OP_WATCH, 0, 0);
> - if (!op)
> - return -ENOMEM;
> + struct ceph_osd_req_op *op;
> + int ret = 0;
>
> if (start) {
> struct ceph_osd_client *osdc;
> @@ -1496,26 +1480,28 @@ static int rbd_req_sync_watch(struct rbd_device
> *rbd_dev, int start)
> ret = ceph_osdc_create_event(osdc, rbd_watch_cb, 0, rbd_dev,
> &rbd_dev->watch_event);
> if (ret < 0)
> - goto done;
> - version = cpu_to_le64(rbd_dev->header.obj_version);
> + return ret;
> linger_req = &rbd_dev->watch_request;
> + } else {
> + rbd_assert(rbd_dev->watch_request != NULL);
> }
>
> - op->watch.ver = version;
> - op->watch.cookie = cpu_to_le64(rbd_dev->watch_event->cookie);
> - op->watch.flag = (u8) start ? 1 : 0;
> -
> - ret = rbd_req_sync_op(rbd_dev,
> + op = rbd_osd_req_op_create(CEPH_OSD_OP_WATCH,
> + rbd_dev->watch_event->cookie,
> + rbd_dev->header.obj_version, start);
> + if (op)
> + ret = rbd_req_sync_op(rbd_dev,
> CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
> op, rbd_dev->header_name,
> 0, 0, NULL, linger_req, NULL);
>
> - if (!start || ret < 0) {
> + /* Cancel the event if we're tearing down, or on error */
> +
> + if (!start || !op || ret < 0) {
> ceph_osdc_cancel_event(rbd_dev->watch_event);
> rbd_dev->watch_event = NULL;
> }
> -done:
> - rbd_destroy_op(op);
> + rbd_osd_req_op_destroy(op);
>
> return ret;
> }
>
next prev parent reply other threads:[~2013-01-17 4:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 15:03 [PATCH REPOST 0/6] rbd: consolidate osd request setup Alex Elder
2013-01-04 15:05 ` [PATCH REPOST 1/6] rbd: don't assign extent info in rbd_do_request() Alex Elder
2013-01-04 15:06 ` [PATCH REPOST 2/6] rbd: don't assign extent info in rbd_req_sync_op() Alex Elder
2013-01-04 15:06 ` [PATCH REPOST 3/6] rbd: initialize off and len in rbd_create_rw_op() Alex Elder
2013-01-04 15:06 ` [PATCH REPOST 4/6] rbd: define generalized osd request op routines Alex Elder
2013-01-04 15:06 ` [PATCH REPOST 5/6] rbd: move call osd op setup into rbd_osd_req_op_create() Alex Elder
2013-01-04 15:07 ` [PATCH REPOST 6/6] rbd: move remaining " Alex Elder
2013-01-17 4:23 ` Josh Durgin [this message]
2013-01-17 4:37 ` Alex Elder
2013-01-17 22:25 ` Alex Elder
2013-01-17 4:25 ` [PATCH REPOST 0/6] rbd: consolidate osd request setup Josh Durgin
2013-01-17 22:19 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F77CC5.6070703@inktank.com \
--to=josh.durgin@inktank.com \
--cc=ceph-devel@vger.kernel.org \
--cc=elder@inktank.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox