From: Nathan O'Sullivan <nathan@mammoth.com.au>
To: ceph-devel@vger.kernel.org
Subject: Re: [Xen-devel] Xen blktap driver for Ceph RBD : Anybody wants to test ? :p
Date: Fri, 21 Jun 2013 17:21:20 +1000 [thread overview]
Message-ID: <51C3FEF0.7030709@mammoth.com.au> (raw)
I've been testing this on Ubuntu 12.04.02 64-bit with kernel 3.2.0-48
and ceph 0.61.4
With rbd cache disabled, it works well enough in initial testing.
However when rbd cache is enabled with:
[client]
rbd_cache = true
the tapdisk process crashes if I do this in the domU:
dd if=/dev/xvda bs=1M > /dev/null
I grabbed the tapdisk stacktrace with gdb:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f1677186700 (LWP 6507)]
0x00007f167d21857c in free () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) bt
#0 0x00007f167d21857c in free () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007f167daab84b in
ceph::buffer::raw_posix_aligned::~raw_posix_aligned() () from
/usr/lib/librados.so.2
#2 0x00007f167daa6f6e in ceph::buffer::ptr::release() () from
/usr/lib/librados.so.2
#3 0x00007f167d5711c7 in std::_List_base<ceph::buffer::ptr,
std::allocator<ceph::buffer::ptr> >::_M_clear() () from /usr/lib/librbd.so.1
#4 0x00007f167d5a8ffe in ObjectCacher::trim(long, long) () from
/usr/lib/librbd.so.1
#5 0x00007f167d5b7e60 in ObjectCacher::_readx(ObjectCacher::OSDRead*,
ObjectCacher::ObjectSet*, Context*, bool) () from /usr/lib/librbd.so.1
#6 0x00007f167d5bd620 in ObjectCacher::C_RetryRead::finish(int) () from
/usr/lib/librbd.so.1
#7 0x00007f167d57281a in Context::complete(int) () from
/usr/lib/librbd.so.1
#8 0x00007f167d5b8f65 in finish_contexts(CephContext*,
std::list<Context*, std::allocator<Context*> >&, int) () from
/usr/lib/librbd.so.1
#9 0x00007f167d5ae705 in ObjectCacher::bh_read_finish(long, sobject_t,
long, unsigned long, ceph::buffer::list&, int, bool) ()
from /usr/lib/librbd.so.1
#10 0x00007f167d5bc32f in ObjectCacher::C_ReadFinish::finish(int) ()
from /usr/lib/librbd.so.1
#11 0x00007f167d57281a in Context::complete(int) () from
/usr/lib/librbd.so.1
#12 0x00007f167d5a31f5 in librbd::C_Request::finish(int) () from
/usr/lib/librbd.so.1
#13 0x00007f167d5a1c14 in librbd::context_cb(void*, void*) () from
/usr/lib/librbd.so.1
#14 0x00007f167d90f56d in librados::C_AioComplete::finish(int) () from
/usr/lib/librados.so.2
#15 0x00007f167d97bb00 in Finisher::finisher_thread_entry() () from
/usr/lib/librados.so.2
#16 0x00007f167c812e9a in start_thread () from
/lib/x86_64-linux-gnu/libpthread.so.0
#17 0x00007f167d288ccd in clone () from /lib/x86_64-linux-gnu/libc.so.6
#18 0x0000000000000000 in ?? ()
Regards
Nathan
next reply other threads:[~2013-06-21 7:30 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 7:21 Nathan O'Sullivan [this message]
2013-06-21 11:21 ` [Xen-devel] Xen blktap driver for Ceph RBD : Anybody wants to test ? :p Sylvain Munaut
2013-07-01 9:57 ` Sylvain Munaut
2013-07-02 3:32 ` Nathan O'Sullivan
-- strict thread matches above, loose matches on Subject: below --
2013-04-18 15:05 Sylvain Munaut
2013-04-19 6:45 ` Pasi Kärkkäinen
2013-04-19 14:41 ` [Xen-devel] " Sylvain Munaut
2013-11-29 11:05 ` James Harper
2013-11-29 15:11 ` Sylvain Munaut
2013-12-01 4:08 ` James Harper
2013-12-03 15:46 ` Sylvain Munaut
2013-08-01 2:12 ` James Harper
2013-08-05 9:41 ` [Xen-devel] " Sylvain Munaut
2013-08-05 9:45 ` James Harper
2013-08-05 11:01 ` Sylvain Munaut
2013-08-05 11:03 ` James Harper
2013-08-05 11:12 ` Pasi Kärkkäinen
2013-08-05 12:03 ` [Xen-devel] " Sylvain Munaut
2013-08-05 13:35 ` George Dunlap
2013-08-05 13:55 ` Sylvain Munaut
2013-08-05 14:04 ` George Dunlap
2013-08-05 15:18 ` Wei Liu
2013-08-05 15:20 ` George Dunlap
2013-08-05 15:32 ` Wei Liu
2013-08-09 0:12 ` James Harper
2013-08-09 9:21 ` Sylvain Munaut
2013-08-11 0:51 ` James Harper
2013-08-11 1:02 ` James Harper
2013-08-12 14:13 ` Sylvain Munaut
2013-08-12 23:26 ` James Harper
2013-08-13 0:39 ` James Harper
2013-08-13 8:32 ` Sylvain Munaut
2013-08-13 9:12 ` James Harper
2013-08-13 9:20 ` Sylvain Munaut
2013-08-13 14:59 ` Frederik Thuysbaert
[not found] ` <520A4945.1030907@gmail.com>
2013-08-13 15:39 ` Sylvain Munaut
2013-08-13 23:39 ` James Harper
2013-08-13 23:43 ` Sylvain Munaut
2013-08-13 23:51 ` James Harper
2013-08-13 23:59 ` James Harper
2013-08-14 13:13 ` Sylvain Munaut
2013-08-14 13:16 ` James Harper
2013-08-15 7:20 ` James Harper
2013-08-16 1:02 ` James Harper
2013-08-14 8:43 ` Frederik Thuysbaert
2013-08-14 15:03 ` Sylvain Munaut
2013-08-16 8:27 ` Frederik Thuysbaert
2013-08-14 8:47 ` Frederik Thuysbaert
2013-08-13 21:47 ` James Harper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C3FEF0.7030709@mammoth.com.au \
--to=nathan@mammoth.com.au \
--cc=ceph-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox