From: Alex Elder <elder@ieee.org>
To: Ilya Dryomov <idryomov@redhat.com>, ceph-devel@vger.kernel.org
Cc: Alex Elder <elder@linaro.org>
Subject: Re: [PATCH 1/3] rbd: fix rbd_dev_parent_get() when parent_overlap == 0
Date: Mon, 26 Jan 2015 21:14:44 -0600 [thread overview]
Message-ID: <54C702A4.9030900@ieee.org> (raw)
In-Reply-To: <1421757669-38796-2-git-send-email-idryomov@redhat.com>
On 01/20/2015 06:41 AM, Ilya Dryomov wrote:
> The comment for rbd_dev_parent_get() said
>
> * We must get the reference before checking for the overlap to
> * coordinate properly with zeroing the parent overlap in
> * rbd_dev_v2_parent_info() when an image gets flattened. We
> * drop it again if there is no overlap.
>
> but the "drop it again if there is no overlap" part was missing from
> the implementation. This lead to absurd parent_ref values for images
> with parent_overlap == 0, as parent_ref was incremented for each
> img_request and virtually never decremented.
You're right about this. If the image had a parent with no
overlap this would leak a reference to the parent image. The
code should have said:
counter = atomic_inc_return_safe(&rbd_dev->parent_ref);
if (counter > 0) {
if (rbd_dev->parent_overlap)
return true;
atomic_dec(&rbd_dev->parent_ref);
} else if (counter < 0) {
rbd_warn(rbd_dev, "parent reference overflow");
}
> Fix this by leveraging the fact that refresh path calls
> rbd_dev_v2_parent_info() under header_rwsem and use it for read in
> rbd_dev_parent_get(), instead of messing around with atomics. Get rid
> of barriers in rbd_dev_v2_parent_info() while at it - I don't see what
> they'd pair with now and I suspect we are in a pretty miserable
> situation as far as proper locking goes regardless.
The point of the memory barrier was to ensure that when parent_overlap
gets zeroed, this code sees the zero rather than the old non-zero
value. The atomic_inc_return_safe() call has an implicit memory
barrier to match the smp_mb() call. It allowed the synchronization
to occur without the use of a lock.
We're trying to atomically determine whether an image request needs
to be marked as layered, to know how to handle ENOENT on parent reads.
If it is a write to an image with a parent having a non-zero overlap,
it's layered, otherwise we can treat it as a simple request.
I think in this particular case, this is just an optimization,
trying very hard to avoid having to do layered image handling
if the parent has become flattened. I think that even if it
got old information (suggesting non-zero overlap) things would
behave correctly, just less efficiently.
Using the semaphore adds a lock to this path and therefore
implements whatever barriers are being removed. I'm not
sure how often this is hit--maybe the optimization isn't
buying much after all.
I am getting a little rusty on some of details of what
precisely happens when a layered image gets flattened.
But I think this looks OK. Maybe just watch for small
(perhaps insignificant) performance regressions with
this change in place...
Reviewed-by: Alex Elder <elder@linaro.org>
> Cc: stable@vger.kernel.org # 3.11+
> Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
> ---
> drivers/block/rbd.c | 20 ++++++--------------
> 1 file changed, 6 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
> index 31fa00f0d707..2990a1c75159 100644
> --- a/drivers/block/rbd.c
> +++ b/drivers/block/rbd.c
> @@ -2098,32 +2098,26 @@ static void rbd_dev_parent_put(struct rbd_device *rbd_dev)
> * If an image has a non-zero parent overlap, get a reference to its
> * parent.
> *
> - * We must get the reference before checking for the overlap to
> - * coordinate properly with zeroing the parent overlap in
> - * rbd_dev_v2_parent_info() when an image gets flattened. We
> - * drop it again if there is no overlap.
> - *
> * Returns true if the rbd device has a parent with a non-zero
> * overlap and a reference for it was successfully taken, or
> * false otherwise.
> */
> static bool rbd_dev_parent_get(struct rbd_device *rbd_dev)
> {
> - int counter;
> + int counter = 0;
>
> if (!rbd_dev->parent_spec)
> return false;
>
> - counter = atomic_inc_return_safe(&rbd_dev->parent_ref);
> - if (counter > 0 && rbd_dev->parent_overlap)
> - return true;
> -
> - /* Image was flattened, but parent is not yet torn down */
> + down_read(&rbd_dev->header_rwsem);
> + if (rbd_dev->parent_overlap)
> + counter = atomic_inc_return_safe(&rbd_dev->parent_ref);
> + up_read(&rbd_dev->header_rwsem);
>
> if (counter < 0)
> rbd_warn(rbd_dev, "parent reference overflow");
>
> - return false;
> + return counter > 0;
> }
>
> /*
> @@ -4238,7 +4232,6 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev)
> */
> if (rbd_dev->parent_overlap) {
> rbd_dev->parent_overlap = 0;
> - smp_mb();
> rbd_dev_parent_put(rbd_dev);
> pr_info("%s: clone image has been flattened\n",
> rbd_dev->disk->disk_name);
> @@ -4284,7 +4277,6 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev)
> * treat it specially.
> */
> rbd_dev->parent_overlap = overlap;
> - smp_mb();
> if (!overlap) {
>
> /* A null parent_spec indicates it's the initial probe */
>
next prev parent reply other threads:[~2015-01-27 3:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-20 12:41 [PATCH 0/3] rbd: parent_overlap == 0 fixes Ilya Dryomov
2015-01-20 12:41 ` [PATCH 1/3] rbd: fix rbd_dev_parent_get() when parent_overlap == 0 Ilya Dryomov
2015-01-21 1:22 ` Josh Durgin
2015-01-27 3:14 ` Alex Elder [this message]
2015-01-20 12:41 ` [PATCH 2/3] rbd: drop parent_ref in rbd_dev_unprobe() unconditionally Ilya Dryomov
2015-01-21 1:24 ` Josh Durgin
2015-01-27 3:40 ` Alex Elder
2015-01-20 12:41 ` [PATCH 3/3] rbd: do not treat standalone as flatten Ilya Dryomov
2015-01-21 1:25 ` Josh Durgin
2015-01-27 3:55 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C702A4.9030900@ieee.org \
--to=elder@ieee.org \
--cc=ceph-devel@vger.kernel.org \
--cc=elder@linaro.org \
--cc=idryomov@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox