From: Waiman Long <longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Johannes Weiner <hannes-druUgvl0LCNAfugRpC6u6w@public.gmane.org>,
Michal Hocko <mhocko-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Vladimir Davydov
<vdavydov.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
Vlastimil Babka <vbabka-AlSwsSmVLrQ@public.gmane.org>,
Roman Gushchin <guro-b10kYP2dOMg@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mm-Bw31MaZKKs3YtjvyW6yDsg@public.gmane.org,
Shakeel Butt <shakeelb-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Muchun Song <songmuchun-EC8Uxl6Npydl57MIdRCFDg@public.gmane.org>,
Luis Goncalves <lgoncalv-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Waiman Long <longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] mm/memcg: Disable task obj_stock for PREEMPT_RT
Date: Tue, 3 Aug 2021 13:55:19 -0400 [thread overview]
Message-ID: <20210803175519.22298-1-longman@redhat.com> (raw)
For PREEMPT_RT kernel, preempt_disable() and local_irq_save()
are typically converted to local_lock() and local_lock_irqsave()
respectively. These two variants of local_lock() are essentially
the same. Thus, there is no performance advantage in choosing one
over the other.
As there is no point in maintaining two different sets of obj_stock,
it is simpler and more efficient to just disable task_obj and use
only irq_obj for PREEMPT_RT. However, task_obj will still be there
in the memcg_stock_pcp structure even though it is not used in this
configuration.
Signed-off-by: Waiman Long <longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
mm/memcontrol.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 87c883227f90..4f80770cb97b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2120,12 +2120,22 @@ static bool obj_stock_flush_required(struct memcg_stock_pcp *stock,
* which is cheap in non-preempt kernel. The interrupt context object stock
* can only be accessed after disabling interrupt. User context code can
* access interrupt object stock, but not vice versa.
+ *
+ * For PREEMPT_RT kernel, preempt_disable() and local_irq_save() may have
+ * to be changed to variants of local_lock(). This eliminates the
+ * performance advantage of using preempt_disable(). Fall back to always
+ * use local_irq_save() and use only irq_obj for simplicity.
*/
+static inline bool use_task_obj_stock(void)
+{
+ return !IS_ENABLED(CONFIG_PREEMPT_RT) && likely(in_task());
+}
+
static inline struct obj_stock *get_obj_stock(unsigned long *pflags)
{
struct memcg_stock_pcp *stock;
- if (likely(in_task())) {
+ if (use_task_obj_stock()) {
*pflags = 0UL;
preempt_disable();
stock = this_cpu_ptr(&memcg_stock);
@@ -2139,7 +2149,7 @@ static inline struct obj_stock *get_obj_stock(unsigned long *pflags)
static inline void put_obj_stock(unsigned long flags)
{
- if (likely(in_task()))
+ if (use_task_obj_stock())
preempt_enable();
else
local_irq_restore(flags);
@@ -2212,7 +2222,7 @@ static void drain_local_stock(struct work_struct *dummy)
stock = this_cpu_ptr(&memcg_stock);
drain_obj_stock(&stock->irq_obj);
- if (in_task())
+ if (use_task_obj_stock())
drain_obj_stock(&stock->task_obj);
drain_stock(stock);
clear_bit(FLUSHING_CACHED_CHARGE, &stock->flags);
@@ -3217,7 +3227,7 @@ static bool obj_stock_flush_required(struct memcg_stock_pcp *stock,
{
struct mem_cgroup *memcg;
- if (in_task() && stock->task_obj.cached_objcg) {
+ if (use_task_obj_stock() && stock->task_obj.cached_objcg) {
memcg = obj_cgroup_memcg(stock->task_obj.cached_objcg);
if (memcg && mem_cgroup_is_descendant(memcg, root_memcg))
return true;
--
2.18.1
next reply other threads:[~2021-08-03 17:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-03 17:55 Waiman Long [this message]
[not found] ` <20210803175519.22298-1-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2021-08-03 23:21 ` [PATCH] mm/memcg: Disable task obj_stock for PREEMPT_RT Thomas Gleixner
2021-08-04 1:40 ` Waiman Long
[not found] ` <8953e099-356e-ee09-a701-f4c7f4cda487-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2021-08-04 8:52 ` Michal Hocko
2021-08-04 16:00 ` Waiman Long
2021-08-04 7:39 ` Vlastimil Babka
2021-08-04 8:33 ` Michal Hocko
[not found] ` <YQpQ43VrlqsOhXKd-2MMpYkNvuYDjFM9bn6wA6Q@public.gmane.org>
2021-08-09 9:07 ` Michal Hocko
[not found] ` <YRDwOhVglJmY7ES5-2MMpYkNvuYDjFM9bn6wA6Q@public.gmane.org>
2021-08-09 9:28 ` Vlastimil Babka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210803175519.22298-1-longman@redhat.com \
--to=longman-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=guro-b10kYP2dOMg@public.gmane.org \
--cc=hannes-druUgvl0LCNAfugRpC6u6w@public.gmane.org \
--cc=lgoncalv-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mm-Bw31MaZKKs3YtjvyW6yDsg@public.gmane.org \
--cc=mhocko-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shakeelb-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=songmuchun-EC8Uxl6Npydl57MIdRCFDg@public.gmane.org \
--cc=vbabka-AlSwsSmVLrQ@public.gmane.org \
--cc=vdavydov.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox