Linux cgroups development
 help / color / mirror / Atom feed
From: Waiman Long <longman@redhat.com>
To: "Tejun Heo" <tj@kernel.org>,
	"Johannes Weiner" <hannes@cmpxchg.org>,
	"Michal Koutný" <mkoutny@suse.com>,
	"Ridong Chen" <ridong.chen@linux.dev>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Shuah Khan" <skhan@linuxfoundation.org>
Cc: cgroups@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org,
	Waiman Long <longman@redhat.com>
Subject: [PATCH v2 1/2] cgroup/cpuset: Avoid unnecessary cpus & mems update in cpuset_hotplug_update_tasks()
Date: Tue, 23 Jun 2026 19:04:12 -0400	[thread overview]
Message-ID: <20260623230413.1984188-2-longman@redhat.com> (raw)
In-Reply-To: <20260623230413.1984188-1-longman@redhat.com>

As reported by sashiko [1], cpuset_hotplug_update_tasks() may perform
unnecessary task iteration and updating of tasks' CPU and node masks
when mems_allowed and/or cpus_allowed are not set in cpuset v2. It is
due to the fact that the temporary new_cpus and new_mems masks do not
inherit parent's effective_cpus/mems when they are empty which is the
expected behavior for cpuset v2 since commit 4ec22e9c5a90 ("cpuset:
Enable cpuset controller in default hierarchy").

Fix that and avoid unnecessay work by enhancing
compute_effective_cpumask() to add the empty cpumask check
and inheriting the parent's versions if empty when in v2. A new
compute_effective_nodemask() helper is also added to perform similar
function for new effective_mems.

Add new test_cpuset_prs.sh test cases to confirm that effective_cpus
will inherit the parent's version if cpuset.cpus is empty.

[1] https://sashiko.dev/#/patchset/20260621032816.1806773-1-longman%40redhat.com

Suggested-by: Ridong Chen <ridong.chen@linux.dev>
Fixes: 4ec22e9c5a90 ("cpuset: Enable cpuset controller in default hierarchy")
Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/cgroup/cpuset.c                        | 45 +++++++++++--------
 .../selftests/cgroup/test_cpuset_prs.sh       | 11 ++++-
 2 files changed, 35 insertions(+), 21 deletions(-)

diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index aff86acea701..044ddbf66f8e 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -1094,12 +1094,35 @@ void cpuset_update_tasks_cpumask(struct cpuset *cs, struct cpumask *new_cpus)
  * @cs: the cpuset the need to recompute the new effective_cpus mask
  * @parent: the parent cpuset
  *
+ * For v2, the parent's effective_cpus is inherited if cpumask empty.
  * The result is valid only if the given cpuset isn't a partition root.
  */
 static void compute_effective_cpumask(struct cpumask *new_cpus,
 				      struct cpuset *cs, struct cpuset *parent)
 {
-	cpumask_and(new_cpus, cs->cpus_allowed, parent->effective_cpus);
+	bool has_cpus;
+
+	has_cpus = cpumask_and(new_cpus, cs->cpus_allowed, parent->effective_cpus);
+	if (!has_cpus && is_in_v2_mode())
+		cpumask_copy(new_cpus, parent->effective_cpus);
+}
+
+/**
+ * compute_effective_nodemask - Compute the effective nodemask of the cpuset
+ * @new_cpus: the temp variable for the new effective_mems mask
+ * @cs: the cpuset the need to recompute the new effective_mems mask
+ * @parent: the parent cpuset
+ *
+ * For v2, the parent's effective_mems is inherited if nodemask empty.
+ */
+static void compute_effective_nodemask(nodemask_t *new_mems,
+				       struct cpuset *cs, struct cpuset *parent)
+{
+	bool has_mems;
+
+	has_mems = nodes_and(*new_mems, cs->mems_allowed, parent->effective_mems);
+	if (!has_mems && is_in_v2_mode())
+		nodes_copy(*new_mems, parent->effective_mems);
 }
 
 /*
@@ -2148,15 +2171,6 @@ static void update_cpumasks_hier(struct cpuset *cs, struct tmpmasks *tmp,
 			goto update_parent_effective;
 		}
 
-		/*
-		 * If it becomes empty, inherit the effective mask of the
-		 * parent, which is guaranteed to have some CPUs unless
-		 * it is a partition root that has explicitly distributed
-		 * out all its CPUs.
-		 */
-		if (is_in_v2_mode() && !remote && cpumask_empty(tmp->new_cpus))
-			cpumask_copy(tmp->new_cpus, parent->effective_cpus);
-
 		/*
 		 * Skip the whole subtree if
 		 * 1) the cpumask remains the same,
@@ -2704,14 +2718,7 @@ static void update_nodemasks_hier(struct cpuset *cs, nodemask_t *new_mems)
 	cpuset_for_each_descendant_pre(cp, pos_css, cs) {
 		struct cpuset *parent = parent_cs(cp);
 
-		bool has_mems = nodes_and(*new_mems, cp->mems_allowed, parent->effective_mems);
-
-		/*
-		 * If it becomes empty, inherit the effective mask of the
-		 * parent, which is guaranteed to have some MEMs.
-		 */
-		if (is_in_v2_mode() && !has_mems)
-			*new_mems = parent->effective_mems;
+		compute_effective_nodemask(new_mems, cp, parent);
 
 		/* Skip the whole subtree if the nodemask remains the same. */
 		if (nodes_equal(*new_mems, cp->effective_mems)) {
@@ -3923,7 +3930,7 @@ static void cpuset_hotplug_update_tasks(struct cpuset *cs, struct tmpmasks *tmp)
 
 	parent = parent_cs(cs);
 	compute_effective_cpumask(&new_cpus, cs, parent);
-	nodes_and(new_mems, cs->mems_allowed, parent->effective_mems);
+	compute_effective_nodemask(&new_mems, cs, parent);
 
 	if (!tmp || !cs->partition_root_state)
 		goto update_tasks;
diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
index 0d41aa0d343d..ca9bc38fdb95 100755
--- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh
+++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh
@@ -495,13 +495,20 @@ REMOTE_TEST_MATRIX=(
 	# Narrowing cpuset.cpus to previously sibling-excluded CPUs should
 	# not return CPUs that were never actually owned.
 	"  C1-4:P1   .   C1-2:P1  C1-3:P2  .       .  \
-	      .      .     .         C3    .       .     p1:4|c11:1-2|c12:3 \
+	      .      .     .       C3      .       .     p1:4|c11:1-2|c12:3 \
 							 p1:P1|c11:P1|c12:P2 3"
 	# Expanding cpuset.cpus to include a previously sibling-excluded CPU
 	# after the sibling has become a member should correctly request it.
 	"  C1-4:P1   .   C1-2:P1  C1-3:P2  .       .  \
-	      .      .      P0     C2-3    .       .     p1:1,4|c11:1|c12:2-3 \
+	      .      .     P0      C2-3    .       .     p1:1,4|c11:1|c12:2-3 \
 							 p1:P1|c11:P0|c12:P2 2-3"
+	# Cpusets with empty cpuset.cpus should inherit parent's effective_cpus
+	"  C1-4:P1 C5-6   C1-2     .       C5      .  \
+	      .      P1    P1      .       .       .     p1:3-4|p2:5-6|c11:1-2|c12:3-4|c21:5|c22:5-6 \
+							 p1:P1|p2:P1|c11:P1"
+	"  C1-4:P1 C5-6   C1-2     .       C5      .  \
+	      .      P1    P1      .      O5=0     .     p1:3-4|p2:6|c11:1-2|c12:3-4|c21:6|c22:6 \
+							 p1:P1|p2:P1|c11:P1"
 )
 
 #
-- 
2.54.0


  reply	other threads:[~2026-06-23 23:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-23 23:04 [PATCH v2 0/2] cgroup/cpuset: Miscellaneous fixes and cleanups Waiman Long
2026-06-23 23:04 ` Waiman Long [this message]
2026-06-23 23:04 ` [PATCH v2 2/2] cgroup/cpuset: Rebind/migrate mm only for threadgroup leader in cpuset_update_tasks_nodemask() Waiman Long

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260623230413.1984188-2-longman@redhat.com \
    --to=longman@redhat.com \
    --cc=cgroups@vger.kernel.org \
    --cc=corbet@lwn.net \
    --cc=hannes@cmpxchg.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=mkoutny@suse.com \
    --cc=ridong.chen@linux.dev \
    --cc=skhan@linuxfoundation.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox