From: Tao Cui <cui.tao@linux.dev>
To: yukuai@fygo.io, axboe@kernel.dk
Cc: cui.tao@linux.dev, tj@kernel.org, linux-block@vger.kernel.org,
josef@toxicpanda.com, cgroups@vger.kernel.org,
linux-kernel@vger.kernel.org, david.laight.linux@gmail.com,
haris.iqbal@linux.dev, cuitao@kylinos.cn,
Yu Kuai <yukuai@huawei.com>
Subject: Re: [PATCH v5] blk-throttle: fix divide-by-zero on legacy iops limit of 0
Date: Fri, 4 Sep 2026 11:24:01 +0800 [thread overview]
Message-ID: <6dc39f3e-e62e-4209-aa93-9308d086bed2@linux.dev> (raw)
In-Reply-To: <63b0770e-844a-4249-a64e-85b1e1978fab@fygo.io>
在 2026/9/4 11:12, yu kuai 写道:
> Hi,
>
> 在 2026/9/4 11:06, Tao Cui 写道:
>> From: Tao Cui <cuitao@kylinos.cn>
>>
>> Writing a multiple of 2^32 (e.g. 4294967296) to a legacy cgroup v1
>> throttle iops file (blkio.throttle.{read,write}_iops_device) silently
>> truncates to 0: tg_set_conf() stores the sscanf-parsed u64 value into
>> an unsigned int field with no clamping. The cgroup v2 path,
>> tg_set_limit(), already clamps the same kind of value with
>> min_t(u64, val, UINT_MAX), but the legacy path never did. Note that
>> the "!v -> U64_MAX" mapping only catches an explicit zero and does not
>> catch a value that truncates to zero.
>>
>> With iops stored as 0, tg_update_has_rules() sets has_rules_iops[] and
>> the next IO reaches tg_within_iops_limit(), which computes
>>
>> jiffy_wait = max(jiffy_wait, HZ / iops_limit + 1);
>>
>> triggering a divide-by-zero oops.
>>
>> Fix it in tg_set_conf() by clamping the value to UINT_MAX, consistent
>> with tg_set_limit(). This closes the truncation root cause: with 0 no
>> longer reachable as a stored limit, the HZ / iops_limit divide is never
>> hit.
>>
>> Signed-off-by: Tao Cui <cuitao@kylinos.cn>
>> Reviewed-by: Yu Kuai <yukuai@huawei.com>
> This tag is wrong, please use yukuai@fygo.io.
Sorry, will update right away.
>>
>> ---
>> Changes in v5:
>> - Rebase onto current linux-next head (no code change, context shifted only).
>> - Add the Reviewed-by tag collected on v4.
>> - Link to v4: https://lore.kernel.org/r/20260722102459.253189-1-cui.tao@linux.dev
>>
>> Changes in v4:
>> - Drop the defensive "iops_limit == 0" check in tg_dispatch_iops_time():
>> with the tg_set_conf() clamp in place, 0 can never be stored as a limit,
>> so the runtime check only guards an unreachable state. (Yu Kuai)
>> - Drop the Fixes: tag: the unclamped write -- and the iops=0 behavior it
>> can produce (calculate_io_allowed() returns 0, so no IO is issued) --
>> long predates the commit that added the HZ / iops_limit divide, so
>> attributing it there was incorrect. (Yu Kuai)
>>
>> Changes in v3:
>> - Drop the (u64) cast on UINT_MAX: the kernel's type-checked min() accepts
>> two unsigned types of different width (both >= 4 bytes), so
>> min(v, UINT_MAX) compiles clean. (David Laight)
>>
>> Changes in v2:
>> - Use a "void *field" local for the config write so the assignment reads
>> *(u64 *)field / *(unsigned int *)field instead of the
>> (type *)((void *)tg + of_cft(of)->private) casts.
>> - Use min(v, UINT_MAX) instead of min_t(u64, v, UINT_MAX).
>> ---
>> block/blk-throttle.c | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/block/blk-throttle.c b/block/blk-throttle.c
>> index ffc3b70065d4..97ad7959d006 100644
>> --- a/block/blk-throttle.c
>> +++ b/block/blk-throttle.c
>> @@ -1383,10 +1383,12 @@ static ssize_t tg_set_conf(struct kernfs_open_file *of,
>> tg = blkg_to_tg(ctx.blkg);
>> tg_update_carryover(tg);
>>
>> + void *field = (void *)tg + of_cft(of)->private;
>> +
>> if (is_u64)
>> - *(u64 *)((void *)tg + of_cft(of)->private) = v;
>> + *(u64 *)field = v;
>> else
>> - *(unsigned int *)((void *)tg + of_cft(of)->private) = v;
>> + *(unsigned int *)field = min(v, UINT_MAX);
>>
>> tg_conf_updated(tg, false);
>> ret = 0;
>
prev parent reply other threads:[~2026-09-04 3:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 3:06 [PATCH v5] blk-throttle: fix divide-by-zero on legacy iops limit of 0 Tao Cui
2026-09-04 3:12 ` yu kuai
2026-09-04 3:24 ` Tao Cui [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6dc39f3e-e62e-4209-aa93-9308d086bed2@linux.dev \
--to=cui.tao@linux.dev \
--cc=axboe@kernel.dk \
--cc=cgroups@vger.kernel.org \
--cc=cuitao@kylinos.cn \
--cc=david.laight.linux@gmail.com \
--cc=haris.iqbal@linux.dev \
--cc=josef@toxicpanda.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=yukuai@fygo.io \
--cc=yukuai@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox