From: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
lizefan.x-EC8Uxl6Npydl57MIdRCFDg@public.gmane.org,
hannes-druUgvl0LCNAfugRpC6u6w@public.gmane.org,
mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
peterz-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
juri.lelli-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
vincent.guittot-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
dietmar.eggemann-5wv7dgnIgG8@public.gmane.org,
rostedt-nx8X9YLhiw1AfugRpC6u6w@public.gmane.org,
bsegall-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
mgorman-l3A5Bk7waGM@public.gmane.org,
bristot-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
zhouchengming-EC8Uxl6Npydl57MIdRCFDg@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: WARNING: suspicious RCU usage since next-20220304
Date: Mon, 7 Mar 2022 11:31:20 +0100 [thread overview]
Message-ID: <YiXe+BFGuZR6Eg5y@Red> (raw)
Hello
Booting my sun8i-a83t-bananapi-m3 since next-20220304 lead to lot of RCU warning:
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Banana Pi BPI-M3
[ 0.000000] earlycon: uart0 at MMIO32 0x01c28000 (options '')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 16 MiB at 0xbf000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff]
[ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] percpu: Embedded 16 pages/cpu s34740 r8192 d22604 u65536
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 earlycon=uart,mmio32,0x01c28000 ip=dhcp
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2017876K/2097152K available (8192K kernel code, 1395K rwdata, 2956K rodata, 1024K init, 7184K bss, 62892K reserved, 16384K cma-reserved, 1294336K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] Running RCU self tests
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] random: get_random_bytes called from start_kernel+0x534/0x6cc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008649] Switching to timer-based delay loop, resolution 41ns
[ 0.015608] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.026505] Console: colour dummy device 80x30
[ 0.031367] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.039759] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.044185] ... MAX_LOCK_DEPTH: 48
[ 0.048693] ... MAX_LOCKDEP_KEYS: 8192
[ 0.053417] ... CLASSHASH_SIZE: 4096
[ 0.058117] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.062911] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.067721] ... CHAINHASH_SIZE: 32768
[ 0.072516] memory used by lock dependency info: 4061 kB
[ 0.078364] memory used for stack traces: 2112 kB
[ 0.083533] per task-struct memory footprint: 1536 bytes
[ 0.089482] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.100709] pid_max: default: 32768 minimum: 301
[ 0.106465] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.114435] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.125719] CPU: Testing write buffer coherency: ok
[ 0.132334]
[ 0.134009] =============================
[ 0.138348] WARNING: suspicious RCU usage
[ 0.142679] 5.17.0-rc6-next-20220307-00130-g074e6e0284df-dirty #222 Not tainted
[ 0.150565] -----------------------------
[ 0.154901] include/linux/cgroup.h:481 suspicious rcu_dereference_check() usage!
[ 0.162883]
[ 0.162883] other info that might help us debug this:
[ 0.162883]
[ 0.171509]
[ 0.171509] rcu_scheduler_active = 1, debug_locks = 1
[ 0.178546] 2 locks held by kthreadd/2:
[ 0.182694] #0: c19216b4 (&p->pi_lock){....}-{2:2}, at: task_rq_lock+0x34/0x134
[ 0.190763] #1: eef68b50 (&rq->__lock){-...}-{2:2}, at: task_rq_lock+0x5c/0x134
[ 0.198810]
[ 0.198810] stack backtrace:
[ 0.203522] CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.17.0-rc6-next-20220307-00130-g074e6e0284df-dirty #222
[ 0.214132] Hardware name: Allwinner A83t board
[ 0.219031] unwind_backtrace from show_stack+0x10/0x14
[ 0.224690] show_stack from 0xf0835e8c
[ 0.228933]
[ 0.230564] =============================
[ 0.234891] WARNING: suspicious RCU usage
[ 0.239217] 5.17.0-rc6-next-20220307-00130-g074e6e0284df-dirty #222 Not tainted
[ 0.247108] -----------------------------
[ 0.251433] include/linux/cgroup.h:481 suspicious rcu_dereference_check() usage!
[ 0.259419]
[ 0.259419] other info that might help us debug this:
[ 0.259419]
[ 0.268061]
[ 0.268061] rcu_scheduler_active = 1, debug_locks = 1
[ 0.275103] no locks held by kthreadd/2.
[ 0.279336]
[ 0.279336] stack backtrace:
[ 0.284043] CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.17.0-rc6-next-20220307-00130-g074e6e0284df-dirty #222
[ 0.294643] Hardware name: Allwinner A83t board
[ 0.299534] unwind_backtrace from show_stack+0x10/0x14
[ 0.305193] show_stack from 0xf0801efc
[ 0.309508] /cpus/cpu@0 missing clock-frequency property
[ 0.315324] /cpus/cpu@1 missing clock-frequency property
[ 0.321178] /cpus/cpu@2 missing clock-frequency property
[ 0.326983] /cpus/cpu@3 missing clock-frequency property
[ 0.332833] /cpus/cpu@100 missing clock-frequency property
[ 0.338835] /cpus/cpu@101 missing clock-frequency property
[ 0.344897] /cpus/cpu@102 missing clock-frequency property
[ 0.350930] /cpus/cpu@103 missing clock-frequency property
[ 0.356920] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.366264] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.374286] ARM CCI driver probed
[ 0.378726] sunxi multi cluster SMP support installed
[ 0.385497] rcu: Hierarchical SRCU implementation.
[ 0.391811]
[ 0.393463] =============================
[ 0.397800] WARNING: suspicious RCU usage
[ 0.402138] 5.17.0-rc6-next-20220307-00130-g074e6e0284df-dirty #222 Not tainted
[ 0.410033] -----------------------------
[ 0.414358] include/linux/cgroup.h:481 suspicious rcu_dereference_check() usage!
[ 0.422337]
[ 0.422337] other info that might help us debug this:
[ 0.422337]
[ 0.430972]
[ 0.430972] rcu_scheduler_active = 1, debug_locks = 1
[ 0.438016] 1 lock held by migration/0/12:
[ 0.442441] #0: eef68b50 (&rq->__lock){-...}-{2:2}, at: __schedule+0xf4/0xaa4
[ 0.450325]
[ 0.450325] stack backtrace:
[ 0.455037] CPU: 0 PID: 12 Comm: migration/0 Not tainted 5.17.0-rc6-next-20220307-00130-g074e6e0284df-dirty #222
[ 0.466027] Hardware name: Allwinner A83t board
[ 0.470920] Stopper: 0x0 <- 0x0
[ 0.474328] unwind_backtrace from show_stack+0x10/0x14
[ 0.479980] show_stack from 0xf087debc
I bisect it to dc6e0818bc9a0336d9accf3ea35d146d72aa7a18 sched/cpuacct: Optimize away RCU read lock
reverting this commit removed some RCU but the boot is clean since I reverted also 3eba0505d03a9c1eb30d40c2330c0880b22d1b3a "sched/cpuacct: Remove redundant RCU read lock"
Regards
next reply other threads:[~2022-03-07 10:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-07 10:31 Corentin Labbe [this message]
2022-03-08 2:30 ` [External] WARNING: suspicious RCU usage since next-20220304 Chengming Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YiXe+BFGuZR6Eg5y@Red \
--to=clabbe.montjoie-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=bristot-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=bsegall-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dietmar.eggemann-5wv7dgnIgG8@public.gmane.org \
--cc=hannes-druUgvl0LCNAfugRpC6u6w@public.gmane.org \
--cc=juri.lelli-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lizefan.x-EC8Uxl6Npydl57MIdRCFDg@public.gmane.org \
--cc=mgorman-l3A5Bk7waGM@public.gmane.org \
--cc=mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=peterz-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=rostedt-nx8X9YLhiw1AfugRpC6u6w@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=vincent.guittot-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=zhouchengming-EC8Uxl6Npydl57MIdRCFDg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).