From: Waiman Long <longman@redhat.com>
To: Chen Ridong <chenridong@huawei.com>,
tj@kernel.org, lizefan.x@bytedance.com, hannes@cmpxchg.org,
adityakali@google.com, sergeh@kernel.org, mkoutny@suse.com
Cc: cgroups@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH -next 1/3] cgroup/cpuset: Correct invalid remote parition prs
Date: Sun, 18 Aug 2024 22:18:08 -0400 [thread overview]
Message-ID: <ff059171-d38e-41a3-86e0-e092a34ba970@redhat.com> (raw)
In-Reply-To: <dc4672a0-bff4-493f-81da-9dfdda9018f2@redhat.com>
On 8/18/24 22:14, Waiman Long wrote:
>
> On 8/16/24 04:27, Chen Ridong wrote:
>> When enable a remote partition, I found that:
>>
>> cd /sys/fs/cgroup/
>> mkdir test
>> mkdir test/test1
>> echo +cpuset > cgroup.subtree_control
>> echo +cpuset > test/cgroup.subtree_control
>> echo 3 > test/test1/cpuset.cpus
>> echo root > test/test1/cpuset.cpus.partition
>> cat test/test1/cpuset.cpus.partition
>> root invalid (Parent is not a partition root)
>>
>> The parent of a remote partition could not be a root. This is due to the
>> emtpy effective_xcpus. It would be better to prompt the message "invalid
>> cpu list in cpuset.cpus.exclusive".
>>
>> Signed-off-by: Chen Ridong <chenridong@huawei.com>
>> ---
>> kernel/cgroup/cpuset.c | 42 +++++++++++++++++++++++-------------------
>> 1 file changed, 23 insertions(+), 19 deletions(-)
>>
>> diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
>> index e34fd6108b06..fdd5346616d3 100644
>> --- a/kernel/cgroup/cpuset.c
>> +++ b/kernel/cgroup/cpuset.c
>> @@ -80,6 +80,7 @@ enum prs_errcode {
>> PERR_HOTPLUG,
>> PERR_CPUSEMPTY,
>> PERR_HKEEPING,
>> + PERR_PMT,
One more thing, the "PMT" acronym for the error code is hard to decode.
I will suggest you either use the "PERMISSION" or "ACCESS" like the
EACCESS errno.
Cheers,
Longman
>> };
>> static const char * const perr_strings[] = {
>> @@ -91,6 +92,7 @@ static const char * const perr_strings[] = {
>> [PERR_HOTPLUG] = "No cpu available due to hotplug",
>> [PERR_CPUSEMPTY] = "cpuset.cpus and cpuset.cpus.exclusive are
>> empty",
>> [PERR_HKEEPING] = "partition config conflicts with
>> housekeeping setup",
>> + [PERR_PMT] = "Enable partition not permitted",
>> };
>> struct cpuset {
>> @@ -1669,7 +1671,7 @@ static int remote_partition_enable(struct
>> cpuset *cs, int new_prs,
>> * The user must have sysadmin privilege.
>> */
>> if (!capable(CAP_SYS_ADMIN))
>> - return 0;
>> + return PERR_PMT;
>> /*
>> * The requested exclusive_cpus must not be allocated to other
>> @@ -1683,7 +1685,7 @@ static int remote_partition_enable(struct
>> cpuset *cs, int new_prs,
>> if (cpumask_empty(tmp->new_cpus) ||
>> cpumask_intersects(tmp->new_cpus, subpartitions_cpus) ||
>> cpumask_subset(top_cpuset.effective_cpus, tmp->new_cpus))
>> - return 0;
>> + return PERR_INVCPUS;
>> spin_lock_irq(&callback_lock);
>> isolcpus_updated = partition_xcpus_add(new_prs, NULL,
>> tmp->new_cpus);
>> @@ -1698,7 +1700,7 @@ static int remote_partition_enable(struct
>> cpuset *cs, int new_prs,
>> */
>> update_tasks_cpumask(&top_cpuset, tmp->new_cpus);
>> update_sibling_cpumasks(&top_cpuset, NULL, tmp);
>> - return 1;
>> + return 0;
>> }
>
> Since you are changing the meaning of the function returned value, you
> should also update the return value comment as well.
>
>> /*
>> @@ -3151,24 +3153,26 @@ static int update_prstate(struct cpuset *cs,
>> int new_prs)
>> goto out;
>> if (!old_prs) {
>> - enum partition_cmd cmd = (new_prs == PRS_ROOT)
>> - ? partcmd_enable : partcmd_enablei;
>> -
>> /*
>> - * cpus_allowed and exclusive_cpus cannot be both empty.
>> - */
>> - if (xcpus_empty(cs)) {
>> - err = PERR_CPUSEMPTY;
>> - goto out;
>> - }
>> + * If parent is valid partition, enable local partiion.
>> + * Otherwise, enable a remote partition.
>> + */
>> + if (is_partition_valid(parent)) {
>> + enum partition_cmd cmd = (new_prs == PRS_ROOT)
>> + ? partcmd_enable : partcmd_enablei;
>> - err = update_parent_effective_cpumask(cs, cmd, NULL,
>> &tmpmask);
>> - /*
>> - * If an attempt to become local partition root fails,
>> - * try to become a remote partition root instead.
>> - */
>> - if (err && remote_partition_enable(cs, new_prs, &tmpmask))
>> - err = 0;
>> + /*
>> + * cpus_allowed and exclusive_cpus cannot be both empty.
>> + */
>> + if (xcpus_empty(cs)) {
>> + err = PERR_CPUSEMPTY;
>> + goto out;
>> + }
>
> The xcpus_empty() check should be done for both local and remote
> partition.
>
> Cheers,
> Longman
>
>> +
>> + err = update_parent_effective_cpumask(cs, cmd, NULL,
>> &tmpmask);
>> + } else {
>> + err = remote_partition_enable(cs, new_prs, &tmpmask);
>> + }
>> } else if (old_prs && new_prs) {
>> /*
>> * A change in load balance state only, no change in cpumasks.
next prev parent reply other threads:[~2024-08-19 2:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-16 8:27 [PATCH -next 0/3] Some optimizations about cpuset Chen Ridong
2024-08-16 8:27 ` [PATCH -next 1/3] cgroup/cpuset: Correct invalid remote parition prs Chen Ridong
2024-08-19 2:14 ` Waiman Long
2024-08-19 2:18 ` Waiman Long [this message]
2024-08-19 6:25 ` chenridong
2024-08-16 8:27 ` [PATCH -next 2/3] cgroup/cpuset: remove fetch_xcpus Chen Ridong
2024-08-19 17:24 ` Saket Kumar Bhaskar
2024-08-19 18:28 ` Waiman Long
2024-08-16 8:27 ` [PATCH -next 3/3] cgroup/cpuset: remove use_parent_ecpus of cpuset Chen Ridong
2024-08-19 18:43 ` Waiman Long
2024-08-19 22:01 ` [PATCH -next 0/3] Some optimizations about cpuset Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ff059171-d38e-41a3-86e0-e092a34ba970@redhat.com \
--to=longman@redhat.com \
--cc=adityakali@google.com \
--cc=cgroups@vger.kernel.org \
--cc=chenridong@huawei.com \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan.x@bytedance.com \
--cc=mkoutny@suse.com \
--cc=sergeh@kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox