From: "Nuno Sá" <nuno.sa@analog.com>
To: <linux-imx@nxp.com>, <linux-renesas-soc@vger.kernel.org>,
<linux-mips@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<chrome-platform@lists.linux.dev>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
<linux-mediatek@lists.infradead.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-msm@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<openbmc@lists.ozlabs.org>
Cc: Cai Huoqing <cai.huoqing@linux.dev>,
Benjamin Fair <benjaminfair@google.com>,
Jishnu Prakash <quic_jprakash@quicinc.com>,
Linus Walleij <linus.walleij@linaro.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Amit Kucheria <amitk@kernel.org>, Andy Gross <agross@kernel.org>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Haibo Chen <haibo.chen@nxp.com>,
Benson Leung <bleung@chromium.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Christophe Branchereau <cbranchereau@gmail.com>,
Patrick Venture <venture@google.com>,
Arnd Bergmann <arnd@arndb.de>, Nancy Yuen <yuenn@google.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Gwendal Grignou <gwendal@chromium.org>,
Saravanan Sekar <sravanhome@gmail.com>,
Tali Perry <tali.perry1@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Paul Cercueil <paul@crapouillou.net>,
Thara Gopinath <thara.gopinath@linaro.org>,
Avi Fishman <avifishman70@gmail.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Tomer Maimon <tmaimon77@gmail.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Jonathan Cameron <jic23@kernel.org>,
Zhang Rui <rui.zhang@intel.com>, Shawn Guo <shawnguo@kernel.org>,
Guenter Roeck <groeck@chromium.org>,
Fabio Estevam <festevam@gmail.com>,
Olivier Moysan <olivier.moysan@foss.st.com>,
Eugen Hristev <eugen.hristev@microchip.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH 32/34] iio: adc: stm32-adc: convert to device properties
Date: Fri, 10 Jun 2022 10:45:43 +0200 [thread overview]
Message-ID: <20220610084545.547700-33-nuno.sa@analog.com> (raw)
In-Reply-To: <20220610084545.547700-1-nuno.sa@analog.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
---
drivers/iio/adc/stm32-adc.c | 128 ++++++++++++++++++++----------------
1 file changed, 70 insertions(+), 58 deletions(-)
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index a68ecbda6480..87acef31ace1 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -21,11 +21,11 @@
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/nvmem-consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
#include "stm32-adc-core.h"
@@ -1524,8 +1524,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
return ret;
}
-static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
int i;
@@ -1579,7 +1579,7 @@ static const struct iio_info stm32_adc_iio_info = {
.hwfifo_set_watermark = stm32_adc_set_watermark,
.update_scan_mode = stm32_adc_update_scan_mode,
.debugfs_reg_access = stm32_adc_debugfs_reg_access,
- .of_xlate = stm32_adc_of_xlate,
+ .fwnode_xlate = stm32_adc_fwnode_xlate,
};
static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
@@ -1776,14 +1776,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
{},
};
-static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
+static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
{
- struct device_node *node = indio_dev->dev.of_node;
+ struct device *dev = &indio_dev->dev;
struct stm32_adc *adc = iio_priv(indio_dev);
unsigned int i;
u32 res;
- if (of_property_read_u32(node, "assigned-resolution-bits", &res))
+ if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
res = adc->cfg->adc_info->resolutions[0];
for (i = 0; i < adc->cfg->adc_info->num_res; i++)
@@ -1867,11 +1867,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
{
- struct device_node *node = indio_dev->dev.of_node;
+ struct device *dev = &indio_dev->dev;
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
int num_channels = 0, ret;
- ret = of_property_count_u32_elems(node, "st,adc-channels");
+ ret = device_property_count_u32(dev, "st,adc-channels");
if (ret > adc_info->max_channels) {
dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
return -EINVAL;
@@ -1879,18 +1879,17 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
num_channels += ret;
}
- ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
- sizeof(struct stm32_adc_diff_channel));
- if (ret > adc_info->max_channels) {
+ ret = device_property_count_u32(dev, "st,adc-diff-channels");
+ if ((ret / 2) > adc_info->max_channels) {
dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
return -EINVAL;
- } else if (ret > 0) {
- adc->num_diff = ret;
- num_channels += ret;
+ } else if ((ret / 2) > 0) {
+ adc->num_diff = ret / 2;
+ num_channels += ret / 2;
}
/* Optional sample time is provided either for each, or all channels */
- ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
+ ret = device_property_count_u32(dev, "st,min-sample-time-nsecs");
if (ret > 1 && ret != num_channels) {
dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
return -EINVAL;
@@ -1901,21 +1900,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
struct stm32_adc *adc,
- struct iio_chan_spec *channels)
+ struct iio_chan_spec *channels,
+ int nchans)
{
- struct device_node *node = indio_dev->dev.of_node;
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
+ struct device *dev = &indio_dev->dev;
u32 num_diff = adc->num_diff;
int size = num_diff * sizeof(*diff) / sizeof(u32);
- int scan_index = 0, val, ret, i;
- struct property *prop;
- const __be32 *cur;
- u32 smp = 0;
+ int scan_index = 0, ret, i;
+ u32 smp = 0, nsmps, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
if (num_diff) {
- ret = of_property_read_u32_array(node, "st,adc-diff-channels",
- (u32 *)diff, size);
+ ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
+ (u32 *)diff, size);
if (ret) {
dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
return ret;
@@ -1936,32 +1934,51 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
}
}
- of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
- if (val >= adc_info->max_channels) {
- dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
+ ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
+ nchans);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < nchans; i++) {
+ if (chans[i] >= adc_info->max_channels) {
+ dev_err(&indio_dev->dev, "Invalid channel %d\n",
+ chans[i]);
return -EINVAL;
}
/* Channel can't be configured both as single-ended & diff */
for (i = 0; i < num_diff; i++) {
- if (val == diff[i].vinp) {
- dev_err(&indio_dev->dev, "channel %d misconfigured\n", val);
+ if (chans[i] == diff[i].vinp) {
+ dev_err(&indio_dev->dev, "channel %d misconfigured\n", chans[i]);
return -EINVAL;
}
}
- stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
- 0, scan_index, false);
+ stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
+ chans[i], 0, scan_index, false);
scan_index++;
}
+ nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
+ if (nsmps) {
+ if (nsmps >= nchans)
+ nsmps = nchans;
+
+ ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
+ smps, nsmps);
+ if (ret)
+ return ret;
+ }
+
for (i = 0; i < scan_index; i++) {
/*
- * Using of_property_read_u32_index(), smp value will only be
- * modified if valid u32 value can be decoded. This allows to
- * get either no value, 1 shared value for all indexes, or one
- * value per channel.
+ * This check is used with the above logic so that smp value
+ * will only be modified if valid u32 value can be decoded. This
+ * allows to get either no value, 1 shared value for all indexes,
+ * or one value per channel. The point is to have the same
+ * behavior as 'of_property_read_u32_index()'.
*/
- of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
+ if (i < nsmps)
+ smp = smps[i];
/* Prepare sampling time settings */
stm32_adc_smpr_init(adc, channels[i].channel, smp);
@@ -2004,22 +2021,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
struct stm32_adc *adc,
struct iio_chan_spec *channels)
{
- struct device_node *node = indio_dev->dev.of_node;
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
- struct device_node *child;
+ struct fwnode_handle *child;
const char *name;
int val, scan_index = 0, ret;
bool differential;
u32 vin[2];
- for_each_available_child_of_node(node, child) {
- ret = of_property_read_u32(child, "reg", &val);
+ device_for_each_child_node(&indio_dev->dev, child) {
+ ret = fwnode_property_read_u32(child, "reg", &val);
if (ret) {
dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
goto err;
}
- ret = of_property_read_string(child, "label", &name);
+ ret = fwnode_property_read_string(child, "label", &name);
/* label is optional */
if (!ret) {
if (strlen(name) >= STM32_ADC_CH_SZ) {
@@ -2044,7 +2060,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
}
differential = false;
- ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
+ ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
/* diff-channels is optional */
if (!ret) {
differential = true;
@@ -2061,7 +2077,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
vin[1], scan_index, differential);
- ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
+ ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
/* st,min-sample-time-ns is optional */
if (!ret) {
stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
@@ -2079,14 +2095,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
return scan_index;
err:
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
-static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
+static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
{
- struct device_node *node = indio_dev->dev.of_node;
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
struct iio_chan_spec *channels;
@@ -2096,7 +2111,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
- num_channels = of_get_available_child_count(node);
+ num_channels = device_get_child_node_count(&indio_dev->dev);
/* If no channels have been found, fallback to channels legacy properties. */
if (!num_channels) {
legacy = true;
@@ -2127,7 +2142,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
return -ENOMEM;
if (legacy)
- ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
+ ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
+ num_channels);
else
ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
if (ret < 0)
@@ -2209,9 +2225,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
bool timestamping = false;
int ret;
- if (!pdev->dev.of_node)
- return -ENODEV;
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
if (!indio_dev)
return -ENOMEM;
@@ -2220,17 +2233,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
adc->common = dev_get_drvdata(pdev->dev.parent);
spin_lock_init(&adc->lock);
init_completion(&adc->completion);
- adc->cfg = (const struct stm32_adc_cfg *)
- of_match_device(dev->driver->of_match_table, dev)->data;
+ adc->cfg = device_get_match_data(dev);
indio_dev->name = dev_name(&pdev->dev);
- indio_dev->dev.of_node = pdev->dev.of_node;
+ device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
indio_dev->info = &stm32_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
platform_set_drvdata(pdev, indio_dev);
- ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
+ ret = device_property_read_u32(dev, "reg", &adc->offset);
if (ret != 0) {
dev_err(&pdev->dev, "missing reg property\n");
return -EINVAL;
@@ -2259,7 +2271,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
}
}
- ret = stm32_adc_of_get_resolution(indio_dev);
+ ret = stm32_adc_fw_get_resolution(indio_dev);
if (ret < 0)
return ret;
@@ -2276,7 +2288,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
timestamping = true;
}
- ret = stm32_adc_chan_of_init(indio_dev, timestamping);
+ ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
if (ret < 0)
goto err_dma_disable;
--
2.36.1
next prev parent reply other threads:[~2022-06-10 8:49 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-10 8:45 [PATCH 00/34] make iio inkern interface firmware agnostic Nuno Sá
2022-06-10 8:45 ` [PATCH 01/34] iio: adc: ad7606: explicitly add proper header files Nuno Sá
2022-06-11 13:59 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 02/34] iio: adc: ad7606_par: " Nuno Sá
2022-06-11 14:00 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 03/34] iio: adc: berlin2-adc: " Nuno Sá
2022-06-11 14:02 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 04/34] iio: adc: imx7d_adc: " Nuno Sá
2022-06-11 14:04 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 05/34] iio: adc: imx8qxp-adc: " Nuno Sá
2022-06-11 14:05 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 06/34] iio: adc: ingenic-adc: " Nuno Sá
2022-06-10 14:45 ` Andy Shevchenko
2022-06-10 19:49 ` Nuno Sá
2022-06-11 14:07 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 07/34] iio: adc: mp2629_adc: " Nuno Sá
2022-06-11 14:08 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 08/34] iio: adc: mt6360-adc: " Nuno Sá
2022-06-11 14:09 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 09/34] iio: adc: npcm_adc: " Nuno Sá
2022-06-11 14:12 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 10/34] iio: adc: rzg2l_adc: " Nuno Sá
2022-06-11 14:13 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 11/34] iio: common: cros_ec_lid_angle: " Nuno Sá
2022-06-11 14:14 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 12/34] iio: common: cros_ec_sensors: " Nuno Sá
2022-06-11 14:16 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 13/34] iio: dac: stm32-dac: " Nuno Sá
2022-06-11 14:17 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 14/34] iio: dac: vf610_dac: " Nuno Sá
2022-06-11 14:19 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 15/34] iio: humidity: hts221_buffer: " Nuno Sá
2022-06-10 14:47 ` Andy Shevchenko
2022-06-11 14:22 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 16/34] iio: light: cros_ec_light_prox: " Nuno Sá
2022-06-11 14:23 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 17/34] iio: pressure: cros_ec_baro: " Nuno Sá
2022-06-10 8:45 ` [PATCH 18/34] iio: trigger: stm32-lptimer-trigger: " Nuno Sá
2022-06-10 8:45 ` [PATCH 19/34] iio: core: drop of.h from iio.h Nuno Sá
2022-06-11 14:30 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 20/34] iio: inkern: only relase the device node when done with it Nuno Sá
2022-06-10 14:56 ` Andy Shevchenko
2022-06-10 20:08 ` Nuno Sá
2022-06-11 14:59 ` Jonathan Cameron
2022-06-13 7:20 ` Nuno Sá
2022-06-18 14:03 ` Jonathan Cameron
2022-06-18 14:13 ` Jonathan Cameron
2022-06-18 17:30 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 21/34] iio: inkern: fix return value in devm_of_iio_channel_get_by_name() Nuno Sá
2022-06-10 14:56 ` Andy Shevchenko
2022-06-10 8:45 ` [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs Nuno Sá
2022-06-10 15:05 ` Andy Shevchenko
2022-06-10 19:48 ` Nuno Sá
2022-06-11 15:17 ` Jonathan Cameron
2022-06-13 7:06 ` Nuno Sá
2022-06-18 14:06 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 23/34] iio: inkern: split of_iio_channel_get_by_name() Nuno Sá
2022-06-10 15:07 ` Andy Shevchenko
2022-06-10 8:45 ` [PATCH 24/34] iio: inkern: move to fwnode properties Nuno Sá
2022-06-10 15:19 ` Andy Shevchenko
2022-06-10 20:01 ` Nuno Sá
2022-06-11 15:30 ` Jonathan Cameron
2022-06-11 15:32 ` Jonathan Cameron
2022-06-13 7:13 ` Nuno Sá
2022-06-18 14:09 ` Jonathan Cameron
2022-06-10 8:45 ` [PATCH 25/34] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API Nuno Sá
2022-06-10 15:20 ` Andy Shevchenko
2022-06-10 19:42 ` Nuno Sá
2022-06-10 8:45 ` [PATCH 26/34] iio: adc: ingenic-adc: convert to IIO fwnode interface Nuno Sá
2022-06-10 8:45 ` [PATCH 27/34] iio: adc: ab8500-gpadc: convert to device properties Nuno Sá
2022-06-15 14:26 ` Linus Walleij
2022-06-10 8:45 ` [PATCH 28/34] iio: adc: at91-sama5d2_adc: " Nuno Sá
2022-06-10 8:45 ` [PATCH 29/34] iio: adc: qcom-pm8xxx-xoadc: " Nuno Sá
2022-06-15 14:27 ` Linus Walleij
2022-06-10 8:45 ` [PATCH 30/34] iio: adc: qcom-spmi-vadc: " Nuno Sá
2022-06-16 13:15 ` Linus Walleij
2022-06-10 8:45 ` [PATCH 31/34] iio: adc: qcom-spmi-adc5: " Nuno Sá
2022-06-16 13:16 ` Linus Walleij
2022-06-10 8:45 ` Nuno Sá [this message]
2022-06-11 15:47 ` [PATCH 32/34] iio: adc: stm32-adc: " Jonathan Cameron
2022-06-17 15:58 ` Fabrice Gasnier
2022-06-10 8:45 ` [PATCH 33/34] iio: inkern: remove OF dependencies Nuno Sá
2022-06-10 8:45 ` [PATCH 34/34] iio: inkern: fix coding style warnings Nuno Sá
2022-06-10 15:53 ` Joe Simmons-Talbott
2022-06-10 19:51 ` Nuno Sá
2022-06-12 17:39 ` Geert Uytterhoeven
2022-06-13 7:23 ` Nuno Sá
2022-06-10 14:48 ` [PATCH 00/34] make iio inkern interface firmware agnostic Andy Shevchenko
2022-06-10 15:28 ` Andy Shevchenko
2022-06-11 15:50 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220610084545.547700-33-nuno.sa@analog.com \
--to=nuno.sa@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=amitk@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=bleung@chromium.org \
--cc=cai.huoqing@linux.dev \
--cc=cbranchereau@gmail.com \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=eugen.hristev@microchip.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=festevam@gmail.com \
--cc=groeck@chromium.org \
--cc=gwendal@chromium.org \
--cc=haibo.chen@nxp.com \
--cc=jic23@kernel.org \
--cc=kernel@pengutronix.de \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=nicolas.ferre@microchip.com \
--cc=olivier.moysan@foss.st.com \
--cc=openbmc@lists.ozlabs.org \
--cc=paul@crapouillou.net \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=quic_jprakash@quicinc.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=sravanhome@gmail.com \
--cc=tali.perry1@gmail.com \
--cc=thara.gopinath@linaro.org \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox