[PATCH v8 6/9] drm/bridge: anx7625: Register Type C mode switches

[Pin-yen Lin <treapking@chromium.org>]

Register USB Type-C mode switches when the "mode-switch" property and
relevant port are available in Device Tree. Configure the crosspoint
switch based on the entered alternate mode for a specific Type-C
connector.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>

---

(no changes since v7)

Changes in v7:
- Fixed style issues in anx7625 driver
- Removed DT property validation in anx7625 driver.
- Extracted common codes to another commit.

Changes in v6:
- Squashed to a single patch

 drivers/gpu/drm/bridge/analogix/Kconfig   |  1 +
 drivers/gpu/drm/bridge/analogix/anx7625.c | 88 +++++++++++++++++++++++
 drivers/gpu/drm/bridge/analogix/anx7625.h | 13 ++++
 3 files changed, 102 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
index 173dada218ec..992b43ed1dd7 100644
--- a/drivers/gpu/drm/bridge/analogix/Kconfig
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -34,6 +34,7 @@ config DRM_ANALOGIX_ANX7625
 	tristate "Analogix Anx7625 MIPI to DP interface support"
 	depends on DRM
 	depends on OF
+	depends on TYPEC || TYPEC=n
 	select DRM_DISPLAY_DP_HELPER
 	select DRM_DISPLAY_HDCP_HELPER
 	select DRM_DISPLAY_HELPER
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 1cf242130b91..2bb504a8d789 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -15,6 +15,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
 #include <linux/workqueue.h>
 
 #include <linux/of_gpio.h>
@@ -2572,6 +2574,86 @@ static void anx7625_runtime_disable(void *data)
 	pm_runtime_disable(data);
 }
 
+static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
+					  enum typec_orientation orientation)
+{
+	if (orientation == TYPEC_ORIENTATION_NORMAL) {
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+				  SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+				  SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
+	} else if (orientation == TYPEC_ORIENTATION_REVERSE) {
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+				  SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+				  SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
+	}
+}
+
+static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
+{
+	struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
+	/* Check if both ports available and do nothing to retain the current one */
+	if (switch_desc.typec_ports[0].dp_connected && switch_desc.typec_ports[1].dp_connected)
+		return;
+
+	if (switch_desc.typec_ports[0].dp_connected)
+		anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
+	else if (switch_desc.typec_ports[1].dp_connected)
+		anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
+}
+
+static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
+				 struct typec_mux_state *state)
+{
+	struct drm_dp_typec_port_data *port_data = typec_mux_get_drvdata(mux);
+	struct anx7625_data *ctx = (struct anx7625_data *) port_data->data;
+	struct device *dev = &ctx->client->dev;
+	struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
+	bool new_dp_connected, old_dp_connected;
+
+	if (switch_desc.num_typec_switches == 1)
+		return 0;
+
+	old_dp_connected = switch_desc.typec_ports[0].dp_connected ||
+			   switch_desc.typec_ports[1].dp_connected;
+
+	port_data->dp_connected = state->alt &&
+				  state->alt->svid == USB_TYPEC_DP_SID &&
+				  state->alt->mode == USB_TYPEC_DP_MODE;
+
+	dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
+		switch_desc.typec_ports[0].dp_connected, switch_desc.typec_ports[1].dp_connected);
+
+	new_dp_connected = switch_desc.typec_ports[0].dp_connected ||
+			   switch_desc.typec_ports[1].dp_connected;
+
+	/* dp on, power on first */
+	if (!old_dp_connected && new_dp_connected)
+		pm_runtime_get_sync(dev);
+
+	anx7625_typec_two_ports_update(ctx);
+
+	/* dp off, power off last */
+	if (old_dp_connected && !new_dp_connected)
+		pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static void anx7625_unregister_typec_switches(struct anx7625_data *ctx)
+{
+	drm_dp_unregister_typec_switches(&ctx->switch_desc);
+}
+
+static int anx7625_register_typec_switches(struct device *dev, struct anx7625_data *ctx)
+{
+	struct device_node *port = of_graph_get_port_by_id(dev->of_node, 1);
+
+	return drm_dp_register_typec_switches(dev, port, &ctx->switch_desc,
+					      ctx, anx7625_typec_mux_set);
+}
+
 static int anx7625_i2c_probe(struct i2c_client *client)
 {
 	struct anx7625_data *platform;
@@ -2679,6 +2761,10 @@ static int anx7625_i2c_probe(struct i2c_client *client)
 	if (platform->pdata.intp_irq)
 		queue_work(platform->workqueue, &platform->work);
 
+	ret = anx7625_register_typec_switches(dev, platform);
+	if (ret && ret != -ENODEV)
+		dev_warn(dev, "Didn't register Type-C switches, err: %d\n", ret);
+
 	platform->bridge.funcs = &anx7625_bridge_funcs;
 	platform->bridge.of_node = client->dev.of_node;
 	if (!anx7625_of_panel_on_aux_bus(&client->dev))
@@ -2730,6 +2816,8 @@ static void anx7625_i2c_remove(struct i2c_client *client)
 
 	drm_bridge_remove(&platform->bridge);
 
+	anx7625_unregister_typec_switches(platform);
+
 	if (platform->pdata.intp_irq)
 		destroy_workqueue(platform->workqueue);
 
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 14f33d6be289..38abbd3d6b36 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -55,6 +55,18 @@
 #define HPD_STATUS_CHANGE 0x80
 #define HPD_STATUS 0x80
 
+#define TCPC_SWITCH_0 0xB4
+#define SW_SEL1_DPTX0_RX2 BIT(0)
+#define SW_SEL1_DPTX0_RX1 BIT(1)
+#define SW_SEL1_SSRX_RX2 BIT(4)
+#define SW_SEL1_SSRX_RX1 BIT(5)
+
+#define TCPC_SWITCH_1 0xB5
+#define SW_SEL2_DPTX1_TX2 BIT(0)
+#define SW_SEL2_DPTX1_TX1 BIT(1)
+#define SW_SEL2_SSTX_TX2 BIT(4)
+#define SW_SEL2_SSTX_TX1 BIT(5)
+
 /******** END of I2C Address 0x58 ********/
 
 /***************************************************************/
@@ -479,6 +491,7 @@ struct anx7625_data {
 	struct drm_connector *connector;
 	struct mipi_dsi_device *dsi;
 	struct drm_dp_aux aux;
+	struct drm_dp_typec_switch_desc switch_desc;
 };
 
 #endif  /* __ANX7625_H__ */
-- 
2.39.0.314.g84b9a713c41-goog