Re: [PATCH v7 7/9] dt/bindings: drm/bridge: it6505: Add mode-switch support

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 05/01/2023 14:24, Pin-yen Lin wrote:
> ITE IT6505 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).

> 
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
> 
> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
> 
> ---
> 
> Changes in v7:
> - Fixed issues reported by dt_binding_check.
> - Updated the schema and the example dts for data-lanes.
> - Changed to generic naming for the example dts node.
> 
> Changes in v6:
> - Remove switches node and use endpoints and data-lanes property to
>   describe the connections.
> 
>  .../bindings/display/bridge/ite,it6505.yaml   | 95 ++++++++++++++++---
>  1 file changed, 84 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index b16a9d9127dd..1ee7cd0d2035 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -77,20 +77,45 @@ properties:
>          unevaluatedProperties: false
>          description: Video port for DP output
>  
> -        properties:
> -          endpoint:
> +        patternProperties:
> +          "^endpoint@[01]$":
>              $ref: /schemas/graph.yaml#/$defs/endpoint-base
>              unevaluatedProperties: false
>  
>              properties:
> +              reg:
> +                maxItems: 1
> +
> +              remote-endpoint: true
> +
>                data-lanes:
> -                minItems: 1
> -                uniqueItems: true
> -                items:
> -                  - enum: [ 0, 1 ]
> -                  - const: 1
> -                  - const: 2
> -                  - const: 3
> +                oneOf:
> +                  - minItems: 1

Drop minItems.

> +                    maxItems: 1

Actually drop this as well and just use items with one item (enum).

> +                    items:
> +                      enum: [0, 1, 2, 3]
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +
> +                  - items:
> +                      - const: 2
> +                      - const: 3
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +                      - const: 2
> +                      - const: 3
> +
> +              mode-switch:
> +                type: boolean
> +                description: Register this node as a Type-C mode switch or not.
> +
> +            required:
> +              - reg
> +              - remote-endpoint
>  
>      required:
>        - port@0
> @@ -102,7 +127,6 @@ required:
>    - pwr18-supply
>    - interrupts
>    - reset-gpios
> -  - extcon
>    - ports
>  
>  additionalProperties: false
> @@ -139,8 +163,11 @@ examples:
>                  };
>  
>                  port@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
>                      reg = <1>;
> -                    it6505_out: endpoint {
> +                    it6505_out: endpoint@0 {
> +                        reg = <0>;
>                          remote-endpoint = <&dp_in>;
>                          data-lanes = <0 1>;
>                      };
> @@ -148,3 +175,49 @@ examples:
>              };
>          };
>      };
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c3 {

Just i2c

Best regards,
Krzysztof