On Wed, Jul 29, 2026 at 03:14:58PM -0700, Alexis Savery wrote: > The LIGHTBAR_CMD_SET_PROGRAM_EX command encapsulates its payload data > with an 8-bit size field `uint8_t size`. However, the driver currently > allows the payload chunk to bypass this limit if the EC transport layer > supports a larger max_request. > > When this occurs, large payloads (e.g., >255 bytes limit) overflow the > 8-bit size variable when assigning `param->set_program_ex.size`, causing > truncation and parse failures in the EC firmware. > > This change functionally clamps max_size dynamically against the struct > maximum (255 bytes). > > Signed-off-by: Alexis Savery Reviewed-by: Benson Leung > --- > drivers/platform/chrome/cros_ec_lightbar.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c > index 02a6c34e68e6..a8df36260419 100644 > --- a/drivers/platform/chrome/cros_ec_lightbar.c > +++ b/drivers/platform/chrome/cros_ec_lightbar.c > @@ -496,9 +496,16 @@ static ssize_t program_store(struct device *dev, struct device_attribute *attr, > return -EINVAL; > } > } else { > + /* > + * The LIGHTBAR_CMD_SET_PROGRAM_EX payload uses a uint8_t size field. > + * Thus, independent of the transport limits, the maximum payload subset > + * that can be transmitted in a single structure is 255 bytes. > + */ > + const size_t max_struct_payload = 255; > extra_bytes = offsetof(typeof(*param), set_program_ex) + > sizeof(param->set_program_ex); > - max_size = ec->ec_dev->max_request - extra_bytes; > + max_size = min((size_t)(ec->ec_dev->max_request - extra_bytes), > + max_struct_payload); > } > > msg = alloc_lightbar_cmd_msg(ec); > -- > 2.55.0.508.g3f0d502094-goog > >