[cip-dev] B@D run on Renesas board - issue

[daniel.sangorrin@toshiba.co.jp (Daniel Sangorrin)]

Hi Trung, Agustin, Robert

> -----Original Message-----
> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> Sent: Monday, November 27, 2017 7:45 PM
> To: Robert Marshall; Daniel Sangorrin
> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org
> Subject: RE: B at D run on Renesas board - issue
> 
> Dear Daniel, Robert,
> 
> Thank for your advices.
> BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test?
> I appreciate that.

I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet.
Agustin: could you try again please? should I send you some information?
Robert: should I send the patches again to make sure that everyone is running the same code?

Best regards,
Daniel

> -----Original Message-----
> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk]
> Sent: Friday, November 17, 2017 4:18 PM
> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi
> <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org
> Subject: Re: B at D run on Renesas board - issue
> 
> Hi
> 
> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes:
> 
> > Dear Trung san
> >
> >> -----Original Message-----
> >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> >> Sent: Thursday, November 16, 2017 5:49 PM
> >> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen
> >> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org
> >> Subject: RE: B at D run on Renesas board - issue
> >>
> >> Dear Daniel,
> >>
> >> Thank for your reply.
> >> The log in attachment is took from lava for easily observing instead of html page.
> >> Regarding deploy section, YES, as you can see the log showing that
> >> has passed over it already to get into test section.
> >>
> >> Is there anything going wrong?
> >> Looking for your feedback
> >>
> >
> > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card.
> >
> 
> It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section:
> 
>     commands: sd
> 
> you should change that to
> 
>     commands: ramdisk
> 
> Robert
> 
> > Regards,
> > Daniel
> >
> >> Best Regards,
> >> Trung
> >>
> >> -----Original Message-----
> >> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
> >> Sent: Thursday, November 16, 2017 3:11 PM
> >> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall'
> >> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen
> >> <binh.nguyen.uw@rvc.renesas.com>
> >> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson'
> >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org
> >> Subject: RE: B at D run on Renesas board - issue
> >>
> >> Dear Trung san,
> >>
> >> > -----Original Message-----
> >> > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> >> > Sent: Wednesday, November 15, 2017 7:21 PM
> >> > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen
> >> > Cc: O365-Toru Oishi; 'Chris Paterson';
> >> > cip-dev at lists.cip-project.org
> >> > Subject: RE: B at D run on Renesas board - issue
> >> >
> >> > Hi Daniel, Robert,
> >> >
> >> > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all:
> >> > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our
> >> > error log in attachment.
> >> > I also take example log over here
> >> > https://gitlab.com/snippets/1679749
> >> > to see that it can create a directory by mkdir /lava-1
> >> >
> >> > Could you please tell us what does it make scene? How can we fix it?
> >> > Thank you.
> >>
> >> Please could you send the complete log?
> >>
> >> > P/S: healthcheck script same as Binh-san attached to you before
> >>
> >> Did you make sure to uncomment the deploy section?
> >>
> >> Regards,
> >> Daniel
> >>
> >> >
> >> > Best Regards,
> >> > Trung
> >> >
> >> > -----Original Message-----
> >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
> >> > Sent: Monday, November 6, 2017 9:19 AM
> >> > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh.
> >> > Nguyen <binh.nguyen.uw@rvc.renesas.com>
> >> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson'
> >> > <Chris.Paterson2@renesas.com>; Trung. Huynh
> >> > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org
> >> > Subject: RE: B at D run on Renesas board - issue
> >> >
> >> > Hello Binh-san,
> >> >
> >> > > -----Original Message-----
> >> > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk]
> >> > > Sent: Saturday, November 04, 2017 1:05 AM
> >> > > To: Binh Thanh. Nguyen
> >> > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung.
> >> > > Huynh; cip-dev at lists.cip-project.org
> >> > > Subject: Re: B at D run on Renesas board - issue
> >> > >
> >> > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes:
> >> > >
> >> > > > Hello Daniel, Robert,
> >> > > >
> >> > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board.
> >> > > > I would like to attach the log and the healthcheck script (we
> >> > > > modified the healthcheck from Daniel)
> >> > > >
> >> > > > The boot action was passed, but after that, look like LAVA
> >> > > > cannot send command to Board, only send "#" (it supposed to be "uname").
> >> > > > I wonder if you met same issue before?
> >> > > > And if possible, please give us any hints you may have for debugging this issue!
> >> > > >
> >> > > > Best regards,
> >> > > > Binh Nguyen
> >> > >
> >> > > Thanh
> >> > >
> >> > > Sorry for the delay in responding!
> >> > >
> >> > > That test is missing a deploy section (all commented out) are you
> >> > > trying to make the test too minimal? LAVA tends to swallow output
> >> > > if it is what is expected.
> >> > >
> >> > > Robert
> >> >
> >> > As Robert said, please do not comment out the deploy section. LAVA
> >> > does not just deploy the binaries as they are, it also copies some
> >> > scripts (LAVA Test shell) into the ramdisk (or network filesystem).
> >> > # LAVA does not use scp (or a serial protocol) to copy them into
> >> > the target
> >> >
> >> > For deploying you need a PDU (remote power switch). If you don't
> >> > have one you need to buy one and then add the corresponding commands.
> >> > # Note: I use an IP Power 9258 remote PDU.
> >> > # Note: do not think you can get around without a PDU*
> >> >
> >> > Thanks,
> >> > Daniel
> >> >
> >> > *There are ways to do it but they have limitations
> >> > https://validation.linaro.org/static/docs/v2/dispatcher-design.html
> >> > #pr
> >> > imary-
> >> > connection
> >> >
> >> >
> >> >
> >> >
> >>
> >>