[cip-dev] [PATCH 0/7] Add HDMI support to iwg20d

[ben.hutchings@codethink.co.uk (Ben Hutchings)]

On Tue, 2018-05-15 at 12:19 +0100, Fabrizio Castro wrote:
> Dear Ben,
> 
> this series adds HDMI video output to iWave's iwg20d board.
> 
> I had to take out interrupt (hotplug) support from the hdmi DT node as
> it looks like commit 9183e45db7774716d056319c237a4185baba19c7 introduced
> "connector" data field with struct adv7511, but drm_connector_init was
> left behind, and as such connector.dev is NULL, and that causes issues
> to function adv7511_hpd_work, preventing HDMI hotplug from working
> properly.
> 
> While investigating HDMI hotplugging, I have found out that when using
> a GPIO purely as an interrupt source the corresponding GPIO module
> clock is not enabled, therefore this series backports the fix for this.
> I yet have to check if this fix is any good to 4.4 LTS, I'll send it to
> stable at vger.kernel.org in case it works for 4.4 LTS too.
> 
> This series applies on top of tag v4.4.126-cip22.
[...]

Sorry, I didn't have time to look at this yet.  I will review it when I
get back from holiday on the 29th.

Ben.

-- 
Ben Hutchings
Software Developer, Codethink Ltd.