From mboxrd@z Thu Jan 1 00:00:00 1970 From: ben.hutchings@codethink.co.uk (Ben Hutchings) Date: Wed, 30 May 2018 16:45:57 +0100 Subject: [cip-dev] [PATCH 4/7] ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video output In-Reply-To: <1526383197-5913-5-git-send-email-fabrizio.castro@bp.renesas.com> References: <1526383197-5913-1-git-send-email-fabrizio.castro@bp.renesas.com> <1526383197-5913-5-git-send-email-fabrizio.castro@bp.renesas.com> Message-ID: <1527695157.2289.13.camel@codethink.co.uk> To: cip-dev@lists.cip-project.org List-Id: cip-dev.lists.cip-project.org On Tue, 2018-05-15 at 12:19 +0100, Fabrizio Castro wrote: > Although there is a HDMI connector on the q7 carrier board it is not > connected to the RZ/G1M SoC. One must use the HDMI connector on the > camera daughter board. > > This patch adds support for this connector. > > Signed-off-by: Fabrizio Castro > Reviewed-by: Biju Das > Reviewed-by: Laurent Pinchart > Signed-off-by: Simon Horman > (cherry picked from commit 55cce0a07678e5fe21c7f81cc437653b485a712c) > (taken out interrupt support) Why is that? Is it a limitation of the GPIO driver in 4.4? Ben. > Signed-off-by: Fabrizio Castro > Reviewed-by: Biju Das [...] -- Ben Hutchings, Software Developer ? Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street Manchester, M1 2HF, United Kingdom We respect your privacy.?? See https://www.codethink.co.uk/privacy.html