From mboxrd@z Thu Jan 1 00:00:00 1970 From: ben.hutchings@codethink.co.uk (Ben Hutchings) Date: Wed, 30 May 2018 17:27:02 +0100 Subject: [cip-dev] [PATCH 4/7] ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video output In-Reply-To: References: <1526383197-5913-1-git-send-email-fabrizio.castro@bp.renesas.com> <1526383197-5913-5-git-send-email-fabrizio.castro@bp.renesas.com> <1527695157.2289.13.camel@codethink.co.uk> Message-ID: <1527697622.2289.15.camel@codethink.co.uk> To: cip-dev@lists.cip-project.org List-Id: cip-dev.lists.cip-project.org On Wed, 2018-05-30 at 15:58 +0000, Fabrizio Castro wrote: > Hi Ben, > > Thank you for your feedback. > > > -----Original Message----- > > From: Ben Hutchings [mailto:ben.hutchings at codethink.co.uk] > > Sent: 30 May 2018 16:46 > > To: Fabrizio Castro > > Cc: cip-dev at lists.cip-project.org; Chris Paterson ; Biju Das > > Subject: Re: [cip-dev][PATCH 4/7] ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video output > > > > On Tue, 2018-05-15 at 12:19 +0100, Fabrizio Castro wrote: > > > Although there is a HDMI connector on the q7 carrier board it is not > > > connected to the RZ/G1M SoC. One must use the HDMI connector on the > > > camera daughter board. > > > > > > This patch adds support for this connector. > > > > > > Signed-off-by: Fabrizio Castro > > > Reviewed-by: Biju Das > > > Reviewed-by: Laurent Pinchart > > > Signed-off-by: Simon Horman > > > (cherry picked from commit 55cce0a07678e5fe21c7f81cc437653b485a712c) > > > (taken out interrupt support) > > > > Why is that???Is it a limitation of the GPIO driver in 4.4? > > From the cover letter this patch belongs to: [...] Oops, sorry, I must remember to read the cover letter first. Ben. -- Ben Hutchings, Software Developer ? Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street Manchester, M1 2HF, United Kingdom We respect your privacy.?? See https://www.codethink.co.uk/privacy.html