From: "Pavel Machek" <pavel@denx.de>
To: nobuhiro1.iwamatsu@toshiba.co.jp
Cc: prabhakar.mahadev-lad.rj@bp.renesas.com,
cip-dev@lists.cip-project.org, pavel@denx.de,
biju.das.jz@bp.renesas.com
Subject: Re: [cip-dev] [PATCH 4.4.y-cip 00/14] Renesas RZ/G1H add support for CAN, IPMMU, QSPI, RTC
Date: Tue, 10 Nov 2020 08:54:31 +0100 [thread overview]
Message-ID: <20201110075431.GA1029@amd> (raw)
In-Reply-To: <OSBPR01MB2983D2D88A4E9CE78F41627692E90@OSBPR01MB2983.jpnprd01.prod.outlook.com>
[-- Attachment #1.1: Type: text/plain, Size: 956 bytes --]
Hi!
> > .../devicetree/bindings/net/can/rcar_can.txt | 3 +-
> > .../devicetree/bindings/spi/spi-rspi.txt | 1 +
> > .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 11 ++
> > arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 52 ++++++++
> > arch/arm/boot/dts/r8a7742-iwg21m.dtsi | 79 +++++++++++-
> > arch/arm/boot/dts/r8a7742.dtsi | 90 ++++++++++++++
> > drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 112 +++++++++++++++++-
> > drivers/spi/spi-sh-msiof.c | 92 +++++++++++---
> > 8 files changed, 418 insertions(+), 22 deletions(-)
>
> I reviewed this patch series, there is not issue.
> I can apply and push if there is no objection.
I don't see any problems either, so no objections from me.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
[-- Attachment #2: Type: text/plain, Size: 420 bytes --]
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#5785): https://lists.cip-project.org/g/cip-dev/message/5785
Mute This Topic: https://lists.cip-project.org/mt/78138424/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2020-11-10 7:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-09 15:49 [cip-dev] [PATCH 4.4.y-cip 00/14] Renesas RZ/G1H add support for CAN, IPMMU, QSPI, RTC Lad Prabhakar
2020-11-09 15:49 ` [cip-dev] [PATCH 4.4.y-cip 01/14] ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically Lad Prabhakar
2020-11-09 15:49 ` [cip-dev] [PATCH 4.4.y-cip 02/14] ARM: dts: r8a7742-iwg21m: Add RTC support Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 03/14] spi: renesas,rspi: Add r8a7742 to the compatible list Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 04/14] ARM: dts: r8a7742: Add QSPI support Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 05/14] ARM: dts: r8a7742-iwg21m: Add SPI NOR support Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 06/14] spi: sh-msiof: Avoid writing to registers from spi_master.setup() Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 07/14] spi: sh-msiof: Implement cs-gpios configuration Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 08/14] ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 09/14] pinctrl: sh-pfc: r8a7790: Add CAN pins, groups and functions Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 10/14] dt-bindings: can: rcar_can: Add r8a7742 support Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 11/14] ARM: dts: r8a7742: Add CAN support Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 12/14] ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 13/14] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB Lad Prabhakar
2020-11-09 15:50 ` [cip-dev] [PATCH 4.4.y-cip 14/14] ARM: dts: r8a7742: Add IPMMU DT nodes Lad Prabhakar
2020-11-10 4:24 ` [cip-dev] [PATCH 4.4.y-cip 00/14] Renesas RZ/G1H add support for CAN, IPMMU, QSPI, RTC Nobuhiro Iwamatsu
2020-11-10 7:54 ` Pavel Machek [this message]
2020-11-10 12:17 ` Nobuhiro Iwamatsu
2020-11-10 12:24 ` Lad Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201110075431.GA1029@amd \
--to=pavel@denx.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox