From: Pavel Machek <pavel@denx.de>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Pavel Machek <pavel@denx.de>,
Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH 5.10.y-cip 03/22] dt-bindings: pinctrl: renesas: Add DT bindings for RZ/G2L pinctrl
Date: Wed, 22 Dec 2021 10:45:46 +0100 [thread overview]
Message-ID: <20211222094546.GB15186@amd> (raw)
In-Reply-To: <20211220133139.21624-4-prabhakar.mahadev-lad.rj@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 672 bytes --]
Hi!
> commit 7958f88aa6636f1927513c887a00e83168f12e35 upstream.
>
> Add device tree binding documentation and header file for Renesas
> RZ/G2L pinctrl.
>
> + drive-strength:
> + enum: [ 2, 4, 8, 12 ]
> + power-source:
> + enum: [ 1800, 2500, 3300 ]
These are likely milliamps and millivolts, right? Elsewhere in device
trees microvolts and microamps are used, so that is not too
consistent.
Is the unit mentioned somewhere / should it be?
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next prev parent reply other threads:[~2021-12-22 9:45 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-20 13:31 [PATCH 5.10.y-cip 00/22] RZ/G2L: Add support for pinctrl/dmac/iic Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 01/22] mm: slab: provide krealloc_array() Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 02/22] clk: renesas: r9a07g044: Add GPIO clock and reset entries Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 03/22] dt-bindings: pinctrl: renesas: Add DT bindings for RZ/G2L pinctrl Lad Prabhakar
2021-12-22 9:45 ` Pavel Machek [this message]
2021-12-22 11:05 ` Prabhakar Mahadev Lad
2021-12-20 13:31 ` [PATCH 5.10.y-cip 04/22] pinctrl: renesas: Add RZ/G2L pin and gpio controller driver Lad Prabhakar
2021-12-22 9:48 ` Pavel Machek
2021-12-22 10:54 ` Prabhakar Mahadev Lad
2021-12-20 13:31 ` [PATCH 5.10.y-cip 05/22] pinctrl: renesas: rzg2l: Fix missing port register 21h Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 06/22] arm64: dts: renesas: rzg2l-smarc: Add scif0 pins Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 07/22] arm64: dts: renesas: r9a07g044: Add pinctrl node Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 08/22] clk: renesas: r9a07g044: Add I2C clocks/resets Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 09/22] dt-bindings: i2c: renesas,riic: Convert to json-schema Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 10/22] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 11/22] arm64: dts: renesas: r9a07g044: Add I2C nodes Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 12/22] arm64: dts: renesas: r9a07g044: Add I2C interrupt-names Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 13/22] clk: renesas: r9a07g044: Add DMAC clocks/resets Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 14/22] dt-bindings: dma: Document RZ/G2L bindings Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 15/22] dmaengine: Extend the dma_slave_width for 128 bytes Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 16/22] dmaengine: sh: Add DMAC driver for RZ/G2L SoC Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 17/22] dmaengine: sh: Fix unused initialization of pointer lmdesc Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 18/22] dmaengine: sh: fix some NULL dereferences Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 19/22] dmaengine: sh: rz-dmac: Add DMA clock handling Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 20/22] dmaengine: sh: make array ds_lut static Lad Prabhakar
2021-12-22 10:04 ` Pavel Machek
2021-12-22 10:26 ` Prabhakar Mahadev Lad
2022-01-04 10:39 ` Biju Das
2021-12-20 13:31 ` [PATCH 5.10.y-cip 21/22] arm64: dts: renesas: r9a07g044: Add DMAC support Lad Prabhakar
2021-12-20 13:31 ` [PATCH 5.10.y-cip 22/22] arm64: defconfig: Enable RZ_DMAC Lad Prabhakar
2021-12-21 9:42 ` [PATCH 5.10.y-cip 00/22] RZ/G2L: Add support for pinctrl/dmac/iic Pavel Machek
2021-12-22 10:06 ` Pavel Machek
2021-12-22 10:19 ` Prabhakar Mahadev Lad
2021-12-22 10:23 ` [cip-dev] " Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211222094546.GB15186@amd \
--to=pavel@denx.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox