From: Pavel Machek <pavel@denx.de>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Pavel Machek <pavel@denx.de>,
nobuhiro1.iwamatsu@toshiba.co.jp,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
cip-dev@lists.cip-project.org
Subject: Re: [PATCH 5.10.y-cip 02/24] arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK
Date: Tue, 2 Aug 2022 18:46:56 +0200 [thread overview]
Message-ID: <20220802164656.GA9523@duo.ucw.cz> (raw)
In-Reply-To: <20220802110850.1496057-3-biju.das.jz@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 900 bytes --]
Hi!
>
> Add basic support for the RZ/G2LC SMARC EVK (based on R9A07G044C2):
> - memory
> - External input clock
> - SCIF
> - GbEthernet
> - Audio Clock
>
> It shares the same carrier board with RZ/G2L, but the pin mapping is
> different. Disable the device nodes which are not tested and delete the
> corresponding pinctrl definitions.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Git is a bit unhappy with blank lines --
Applying: arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK
.git/rebase-apply/patch:171: new blank line at EOF.
+
.git/rebase-apply/patch:253: new blank line at EOF.
+
-- but as before that is probably not worth solving in separate patch.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
next prev parent reply other threads:[~2022-08-02 16:47 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-02 11:08 [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 01/24] arm64: dts: renesas: Add initial DTSI for RZ/G2LC SoC Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 02/24] arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK Biju Das
2022-08-02 16:46 ` Pavel Machek [this message]
2022-08-03 7:19 ` Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 03/24] arm64: dts: renesas: rzg2lc-smarc-som: Enable eMMC on SMARC platform Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 04/24] arm64: dts: renesas: rzg2lc-smarc: Enable microSD " Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 05/24] clk: renesas: r9a07g044: Add mux and divider for G clock Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 06/24] clk: renesas: r9a07g044: Add GPU clock and reset entries Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 07/24] clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 08/24] dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 09/24] dt-bindings: clock: renesas: Document RZ/V2L SoC Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 10/24] clk: renesas: rzg2l-cpg: Add support for " Biju Das
2022-08-02 16:54 ` Pavel Machek
2022-08-03 7:16 ` Biju Das
2022-08-03 13:50 ` Pavel Machek
2022-08-02 11:08 ` [PATCH 5.10.y-cip 11/24] clk: renesas: rzg2l: Remove unused notifiers Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 12/24] clk: renesas: rzg2l: Simplify multiplication/shift logic Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 13/24] dt-bindings: serial: renesas,scif: Document RZ/V2L SoC Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 14/24] dt-bindings: serial: renesas,sci: " Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 15/24] dt-bindings: pinctrl: renesas: Document RZ/V2L pinctrl Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 16/24] pinctrl: renesas: Kconfig: Select PINCTRL_RZG2L if RZ/V2L SoC is enabled Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 17/24] pinctrl: renesas: rzg2l: Improve rzg2l_gpio_register() Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 18/24] dt-bindings: net: renesas,etheravb: Document RZ/V2L SoC Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 19/24] arm64: dts: renesas: Add initial DTSI for " Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 20/24] arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 21/24] arm64: defconfig: Enable ARCH_R9A07G054 Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 22/24] arm64: dts: renesas: rzg2l-smarc: Add common dtsi file Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 23/24] arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings Biju Das
2022-08-02 11:08 ` [PATCH 5.10.y-cip 24/24] arm64: dts: renesas: rzg2lc-smarc: Enable SCIF1 on carrier board Biju Das
2022-08-02 16:56 ` [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support Pavel Machek
2022-08-03 8:07 ` nobuhiro1.iwamatsu
2022-08-03 13:50 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220802164656.GA9523@duo.ucw.cz \
--to=pavel@denx.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox