[cip-dev] B@D run on Renesas board - issue

[robert.marshall@codethink.co.uk (Robert Marshall)]

"Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes:

> Hi Trung, Agustin, Robert
>
>> -----Original Message-----
>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
>> Sent: Monday, November 27, 2017 7:45 PM
>> To: Robert Marshall; Daniel Sangorrin
>> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org
>> Subject: RE: B at D run on Renesas board - issue
>> 
>> Dear Daniel, Robert,
>> 
>> Thank for your advices.
>> BTW, could you please give me uImage and device tree file as well as
>> file system you have already built to use in your sample test?
>> I appreciate that.
>
> I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet.
> Agustin: could you try again please? should I send you some information?
> Robert: should I send the patches again to make sure that everyone is running the same code?
>
Daniel

I think your changes are all in Tom's mirror of the repos but they
haven't been merged in yet

https://gitlab.com/tpollard/board-at-desk-single-dev/tree/master

Let me see if this can be MR'ed!

Robert



> Best regards,
> Daniel
>
>> -----Original Message-----
>> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk]
>> Sent: Friday, November 17, 2017 4:18 PM
>> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
>> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh
>> Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi
>> <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org
>> Subject: Re: B at D run on Renesas board - issue
>> 
>> Hi
>> 
>> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes:
>> 
>> > Dear Trung san
>> >
>> >> -----Original Message-----
>> >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
>> >> Sent: Thursday, November 16, 2017 5:49 PM
>> >> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen
>> >> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org
>> >> Subject: RE: B at D run on Renesas board - issue
>> >>
>> >> Dear Daniel,
>> >>
>> >> Thank for your reply.
>> >> The log in attachment is took from lava for easily observing instead of html page.
>> >> Regarding deploy section, YES, as you can see the log showing that
>> >> has passed over it already to get into test section.
>> >>
>> >> Is there anything going wrong?
>> >> Looking for your feedback
>> >>
>> >
>> > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card.
>> >
>> 
>> It would be useful to see the test yaml as it is now, but looking
>> back in the thread the original has in the boot section:
>> 
>>     commands: sd
>> 
>> you should change that to
>> 
>>     commands: ramdisk
>> 
>> Robert
>> 
>> > Regards,
>> > Daniel
>> >
>> >> Best Regards,
>> >> Trung
>> >>
>> >> -----Original Message-----
>> >> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
>> >> Sent: Thursday, November 16, 2017 3:11 PM
>> >> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall'
>> >> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen
>> >> <binh.nguyen.uw@rvc.renesas.com>
>> >> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson'
>> >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org
>> >> Subject: RE: B at D run on Renesas board - issue
>> >>
>> >> Dear Trung san,
>> >>
>> >> > -----Original Message-----
>> >> > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
>> >> > Sent: Wednesday, November 15, 2017 7:21 PM
>> >> > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen
>> >> > Cc: O365-Toru Oishi; 'Chris Paterson';
>> >> > cip-dev at lists.cip-project.org
>> >> > Subject: RE: B at D run on Renesas board - issue
>> >> >
>> >> > Hi Daniel, Robert,
>> >> >
>> >> > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all:
>> >> > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our
>> >> > error log in attachment.
>> >> > I also take example log over here
>> >> > https://gitlab.com/snippets/1679749
>> >> > to see that it can create a directory by mkdir /lava-1
>> >> >
>> >> > Could you please tell us what does it make scene? How can we fix it?
>> >> > Thank you.
>> >>
>> >> Please could you send the complete log?
>> >>
>> >> > P/S: healthcheck script same as Binh-san attached to you before
>> >>
>> >> Did you make sure to uncomment the deploy section?
>> >>
>> >> Regards,
>> >> Daniel
>> >>
>> >> >
>> >> > Best Regards,
>> >> > Trung
>> >> >
>> >> > -----Original Message-----
>> >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
>> >> > Sent: Monday, November 6, 2017 9:19 AM
>> >> > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh.
>> >> > Nguyen <binh.nguyen.uw@rvc.renesas.com>
>> >> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson'
>> >> > <Chris.Paterson2@renesas.com>; Trung. Huynh
>> >> > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org
>> >> > Subject: RE: B at D run on Renesas board - issue
>> >> >
>> >> > Hello Binh-san,
>> >> >
>> >> > > -----Original Message-----
>> >> > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk]
>> >> > > Sent: Saturday, November 04, 2017 1:05 AM
>> >> > > To: Binh Thanh. Nguyen
>> >> > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung.
>> >> > > Huynh; cip-dev at lists.cip-project.org
>> >> > > Subject: Re: B at D run on Renesas board - issue
>> >> > >
>> >> > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes:
>> >> > >
>> >> > > > Hello Daniel, Robert,
>> >> > > >
>> >> > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board.
>> >> > > > I would like to attach the log and the healthcheck script (we
>> >> > > > modified the healthcheck from Daniel)
>> >> > > >
>> >> > > > The boot action was passed, but after that, look like LAVA
>> >> > > > cannot send command to Board, only send "#" (it supposed to be "uname").
>> >> > > > I wonder if you met same issue before?
>> >> > > > And if possible, please give us any hints you may have for debugging this issue!
>> >> > > >
>> >> > > > Best regards,
>> >> > > > Binh Nguyen
>> >> > >
>> >> > > Thanh
>> >> > >
>> >> > > Sorry for the delay in responding!
>> >> > >
>> >> > > That test is missing a deploy section (all commented out) are you
>> >> > > trying to make the test too minimal? LAVA tends to swallow output
>> >> > > if it is what is expected.
>> >> > >
>> >> > > Robert
>> >> >
>> >> > As Robert said, please do not comment out the deploy section. LAVA
>> >> > does not just deploy the binaries as they are, it also copies some
>> >> > scripts (LAVA Test shell) into the ramdisk (or network filesystem).
>> >> > # LAVA does not use scp (or a serial protocol) to copy them into
>> >> > the target
>> >> >
>> >> > For deploying you need a PDU (remote power switch). If you don't
>> >> > have one you need to buy one and then add the corresponding commands.
>> >> > # Note: I use an IP Power 9258 remote PDU.
>> >> > # Note: do not think you can get around without a PDU*
>> >> >
>> >> > Thanks,
>> >> > Daniel
>> >> >
>> >> > *There are ways to do it but they have limitations
>> >> > https://validation.linaro.org/static/docs/v2/dispatcher-design.html
>> >> > #pr
>> >> > imary-
>> >> > connection
>> >> >
>> >> >
>> >> >
>> >> >
>> >>
>> >>