From mboxrd@z Thu Jan  1 00:00:00 1970
From: robert.marshall@codethink.co.uk (Robert Marshall)
Date: Mon, 07 Aug 2017 14:13:41 +0100
Subject: [cip-dev] B@D support Renesas iwg20m board - issue
In-Reply-To: <FD48CE4B67D3004BAA683CC1E3106E2D07BABEAB32@RVC-MBS-CL.rvc.renesas.com>
	(Binh Thanh. Nguyen's message of "Fri, 4 Aug 2017 19:22:43 +0700")
References: <FD48CE4B67D3004BAA683CC1E3106E2D07BABEAB32@RVC-MBS-CL.rvc.renesas.com>
Message-ID: <87tw1jbjwa.fsf@ctlt579.codethink.co.uk>
To: cip-dev@lists.cip-project.org
List-Id: cip-dev.lists.cip-project.org

"Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes:

> Hello all,
>
> I am trying to add support healthcheck for Renesas iwg20m board into
> [1]. My current healthcheck is just simply boot up the board (no
> deploy and test definition).
> And I still meet one issue with that booting action. The issue is
> whenever I run healthcheck, It always run soft-reboot and
> failed. 'reboot' command is just supported after booting board. So if
> I booted the board first, then run the healthcheck, it will pass.
>
> Anyone have advices for me?

Hi

I've seen errors on the soft reboot with the beagle bone black which go
away the next time it is run. Have you tried this more than once - does
it consistently fail?

Thanks for the patches

I've always run HC tests with the BB black on an already booted board, do
you need to do any preparation to get the health check to run in this
case?

Robert

>
> Please find my patches to apply for [1] in attached files.
>
> [1] https://gitlab.com/cip-project/cip-testing/board-at-desk-single-dev/
>
> Below is the log:
>
> start: 0 validate
> device may need manual intervention to reboot validate duration: 0.00
> start: 1 uboot-action (max 120s)
> start: 1.1 uboot-prepare-kernel (max 120s) uboot-prepare-kernel duration: 0.00
> start: 1.2 uboot-from-media (max 120s)
> uboot-from-media duration: 0.00
> start: 1.3 uboot-overlay (max 120s)
> Parsed boot commands: setenv autoload no; setenv initrd_high
> '0xffffffff'; setenv fdt_high '0xffffffff'; setenv bootargs
> 'console=ttySC0,115200n8 vmalloc=384M root=/dev/mmcblk0p2 '; setenv
> loadkernel 'fatload mmc 2:1 0x40007fc0 uImage'; setenv loadfdt
> 'fatload mmc 2:1 0x40f00000 r8a7743-iwg20m.dtb'; setenv bootcmd 'run
> loadkernel; run loadfdt; bootm 0x40007fc0 - 0x40f00000'; run bootcmd
> uboot-overlay duration: 0.00
> start: 1.4 connect-device (max 120s)
> connect-device Connecting to device using 'telnet localhost 8020'
> connect-device duration: 0.00
> start: 1.5 uboot-retry (max 120s)
> start: 1.5.1 reboot-device (max 120s)
> start: 1.5.1.1 soft-reboot (max 120s)
> reboot
> reboot
> reboot -n
> reboot -n
> reboot -n -f
> reboot -n -f
> soft-reboot: Wait for prompt Restarting system. 120 seconds Trying ::1...
> Connected to localhost.
> Escape character is '^]'.
> ser2net port 8020 device /dev/ttyUSB0 [115200 N81] (Debian GNU/Linux)
> case: soft-reboot
> definition: lava
> result: fail
> level: 1.5.1.1
> duration: 120.000326157
> extra: ...
> soft-reboot timed out after 120 seconds
> soft-reboot timed out after 120 seconds
> uboot-retry failed: 1 of 2 attempts. 'soft-reboot timed out after 120 seconds'
> start: 1.5.1 reboot-device (max 120s)
> start: 1.5.1.1 soft-reboot (max 120s)
> ...
>
> Best regards,
> Binh Nguyen
>
>
>
>
> _______________________________________________
> cip-dev mailing list
> cip-dev at lists.cip-project.org
> https://lists.cip-project.org/mailman/listinfo/cip-dev