[cip-dev] B@D: iwg20m support

[tram.nguyen.xw@rvc.renesas.com (Tram Quynh Thi. Nguyen)]

Hi Daniel,

I got it. Thank you for your information.
Our SDK information: "cortexa15hf"

Best regards,
Tram Nguyen

-----Original Message-----
From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] 
Sent: Monday, March 26, 2018 3:45 PM
To: Tram Quynh Thi. Nguyen <tram.nguyen.xw@rvc.renesas.com>; 'Zoran S' <zoran.stojsavljevic.de@gmail.com>
Cc: O365-Anh The. Tran <anh.tran.jc@renesas.com>; O365-Yasushi Onishi <yasushi.onishi.xc@renesas.com>; O365-Yoshinori Kaneko <yoshinori.kaneko.xg@renesas.com>; cip-dev at lists.cip-project.org; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Minh Thuy Dinh. Tran <minh.tran.xc@renesas.com>; O365-Chan Duc. Vu <chan.vu.xv@renesas.com>
Subject: RE: [cip-dev] B at D: iwg20m support

Hi Tram,

> -----Original Message-----
> From: Tram Quynh Thi. Nguyen [mailto:tram.nguyen.xw at rvc.renesas.com]
> Sent: Monday, March 26, 2018 5:40 PM
> To: Zoran S <zoran.stojsavljevic.de@gmail.com>; Daniel Sangorrin 
> <daniel.sangorrin@toshiba.co.jp>
> Cc: O365-Anh The. Tran <anh.tran.jc@renesas.com>; O365-Yasushi Onishi 
> <yasushi.onishi.xc@renesas.com>; O365-Yoshinori Kaneko 
> <yoshinori.kaneko.xg@renesas.com>; cip-dev at lists.cip-project.org; Binh 
> Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Minh Thuy Dinh. 
> Tran <minh.tran.xc@renesas.com>; O365-Chan Duc. Vu 
> <chan.vu.xv@renesas.com>
> Subject: RE: [cip-dev] B at D: iwg20m support
> 
> Hi Daniel,
> 
> Thank you for your support.
> 
> Hi Zoran,
> 
> Thank you for your support.
> 
> I followed this guide to build for Renesas iwg20m board and got the results without errors:
> https://gitlab.com/cip-project/cip-core/blob/master/deby/poky/meta-cip
> -iwg20m/README.IWG20M.txt
> 
> Daniel got my idea.
> In our environment, we use different SDK to compile c source to binary.
> That a reason why I asked for SDK.

If you are allowed, could you give me some information about your SDK?
For example, the one in CIP core uses the "cortexa15" tuning, but yours maybe using "cortexa15hf" for example.

Also, if your tests are using dynamic linking then you need to make sure that your SDK library headers are the same version as the libraries on the target as well. If you use static linking I think it should not matter.

Thanks,
Daniel

> -----Original Message-----
> From: Zoran S [mailto:zoran.stojsavljevic.de at gmail.com]
> Sent: Monday, March 26, 2018 2:55 PM
> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
> Cc: Tram Quynh Thi. Nguyen <tram.nguyen.xw@rvc.renesas.com>; O365-Anh 
> The. Tran <anh.tran.jc@renesas.com>; O365-Yasushi Onishi 
> <yasushi.onishi.xc@renesas.com>; O365-Yoshinori Kaneko 
> <yoshinori.kaneko.xg@renesas.com>; cip-dev at lists.cip- project.org; 
> Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Minh Thuy 
> Dinh. Tran <minh.tran.xc@renesas.com>; O365-Chan Duc. Vu 
> <chan.vu.xv@renesas.com>
> Subject: Re: [cip-dev] B at D: iwg20m support
> 
> Hello Tram,
> 
> I have no idea what you are talking here (which problem with iwg20m), 
> but if you (as Daniel mentioned) are dealing with YOCTO build, I 
> finally (after in total 3 days of struggle) built one on Saturday (on my home network). I am just about (today) to test out of CIP YOCTO kernel 4.4.-x, initramfs.gpio.gz and .dtb.
> 
> It has nothing to do with Daniel's Sangorrin kas script (which is 
> based upon configuration tool called kas - Siemens based - authors Jan Kiszka, Daniel Wagner and Henning Schill):
> Kas iwg20d script is here:
> https://gitlab.com/cip-project/cip-core/blob/master/deby/poky/meta-cip
> -bbb/kas-bbb.yml
> .
> 
> I was NOT able to build it, due to the following error:
> https://www.mail-archive.com/yocto at yoctoproject.org/msg39512.html
> 
> Rather, my YOCTO build has everything to do with:
> https://elinux.org/RZ-G/Boards/Yocto_2.0
> 
> I compiled it... And have created loads for core-image-minimal and 
> core-image-weston (weston is Wayland compositor, behind Wayland server protocol).
> 
> It is a bit peculiar environment required to build the outdated 
> YOCTO... ;-)
> 
> Zoran
> _______
> 
> On Mon, Mar 26, 2018 at 3:08 AM, Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> wrote:
> > Dear Tram,
> >
> >> -----Original Message-----
> >> From: Tram Quynh Thi. Nguyen 
> >> [mailto:tram.nguyen.xw at rvc.renesas.com]
> >> Sent: Friday, March 23, 2018 11:34 PM
> >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
> >> Cc: cip-dev at lists.cip-project.org; O365-Chan Duc. Vu 
> >> <chan.vu.xv@renesas.com>; O365-Minh Thuy Dinh. Tran 
> >> <minh.tran.xc@renesas.com>; O365-Anh The. Tran 
> >> <anh.tran.jc@renesas.com>; Binh Thanh. Nguyen 
> >> <binh.nguyen.uw@rvc.renesas.com>; O365-Yoshinori Kaneko 
> >> <yoshinori.kaneko.xg@renesas.com>; O365-Yasushi Onishi 
> >> <yasushi.onishi.xc@renesas.com>
> >> Subject: RE: [cip-dev] B at D: iwg20m support
> >>
> >> Dear Daniel-san,
> >> CC all,
> >>
> >> Currently, I found below issue when running Test Cases on your environment or newest cip-core environment:
> >> - Cannot run any binary files.
> >> Reason: We use our SDK to build the binary files.
> >>
> >> Could you please share how to compile binary to run on this envionment?
> >> Thank you for your support.
> >
> > To build the SDK use "bitbake meta-toolchain".
> >
> > Thanks,
> > Daniel
> >
> >> -----Original Message-----
> >> From: Trung. Huynh
> >> Sent: Friday, January 12, 2018 9:16 AM
> >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
> >> Cc: cip-dev at lists.cip-project.org; O365-Chan Duc. Vu 
> >> <chan.vu.xv@renesas.com>; O365-Minh Thuy Dinh. Tran 
> >> <minh.tran.xc@renesas.com>; O365-Anh The. Tran 
> >> <anh.tran.jc@renesas.com>; Binh Thanh. Nguyen 
> >> <binh.nguyen.uw@rvc.renesas.com>; O365-Yoshinori Kaneko 
> >> <yoshinori.kaneko.xg@renesas.com>; O365-Yasushi Onishi 
> >> <yasushi.onishi.xc@renesas.com>; Tram Quynh Thi. Nguyen 
> >> <tram.nguyen.xw@rvc.renesas.com>
> >> Subject: RE: [cip-dev] B at D: iwg20m support
> >>
> >> Dear Daniel
> >>
> >> > -----Original Message-----
> >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
> >> > Sent: Thursday, January 11, 2018 12:50 PM
> >> > To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>
> >> > Cc: cip-dev at lists.cip-project.org; O365-Chan Duc. Vu 
> >> > <chan.vu.xv@renesas.com>; O365-Minh Thuy Dinh. Tran 
> >> > <minh.tran.xc@renesas.com>; O365-Anh The. Tran 
> >> > <anh.tran.jc@renesas.com>; Binh Thanh. Nguyen 
> >> > <binh.nguyen.uw@rvc.renesas.com>; O365-Yoshinori Kaneko 
> >> > <yoshinori.kaneko.xg@renesas.com>; O365-Yasushi Onishi 
> >> > <yasushi.onishi.xc@renesas.com>
> >> > Subject: RE: [cip-dev] B at D: iwg20m support
> >> >
> >> > Dear Trung san,
> >> >
> >> > > -----Original Message-----
> >> > > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> >> > ..
> >> > > >
> >> > > > Please let me confirm just in case. Am I right if I say that 
> >> > > > you plan to you submit not only the kernel configuration 
> >> > > > flags but also test dependency definitions to cip core, and 
> >> > > > the
> >> corresponding yaml files for B at D?.
> >> > > > If that's correct I will be glad to accept them.
> >> > >
> >> > > Yes, we would love to be apart in B at D with our contribution for who need to take our test suites as a testing plan.
> >> > > We do not promise this is to become excellent suites but we do 
> >> > > our best to have a good things that somebody to think about at 
> >> > > first
> >> >
> >> > OK, that's great!
> >> >
> >> > > > > Regarding shmobile_defconfig, attachment shows up for you.
> >> > > >
> >> > > > Thanks, you only changed these flags right?
> >> > > > CONFIG_BLK_DEV_RAM_SIZE=250000
> >> > > > CONFIG_BLK_DEV_RAM_COUNT=4
> >> > >
> >> > > You're right, the cip-core I pulled down from global site 
> >> > > without changing anything, it just be changed those flags and built under standalone of Linaro's cross compiler.
> >> >
> >> > I just realized that you might be using the wrong branch of cip-core. You should be using the "master" branch not the "jethro"
> >> > one which was used and frozen for the cip-core release and the quickstart wiki page (the master branch depends on "morty").
> >> > The jethro branch was using a non-official CIP kernel repository
> >> > (https://github.com/renesas-rz/renesas-cip) but on the master
> >> branch we are using the official CIP kernel.  For that reason, 
> >> shmobile_defconfig on the main branch is different and some drivers have not been merged yet.
> >> > Please could you check which branch you are using?
> >>
> >> Is v4.4.55-cip3 the "Jethro" one? Because I saw this is the build I was use.
> >>
> >> >
> >> > I have added your kernel configuration changes:
> >> > https://gitlab.com/cip-project/cip-core/commit/c1efa6325909815731
> >> > ab
> >> > e0b
> >> > 69ec7e19e2e56aee7 Please let me know if that works for you.
> >>
> >> Anyway, let get back to master branch with flags from your suggestion, the issue seems get to worse than previous one:
> >> After uboot pull necessary packages on RAM up, it get stuck at:
> >>
> >> Starting kernel ...
> >>
> >> Nothing print out after this, so we didn't explore what occurring I 
> >> also tried to test with v4.4.83-cip8 if any possibility to solve 
> >> the problem but same things
> >>
> >> >
> >> > Could you show me how you built cip-core using Linaro's cross compiler?
> >> > By the way, cip-core builds its own toolchain, are you using Linaro's to reduce build time?
> >>
> >> In circle development process, we build up our target packages by 
> >> Yocto But for this cip-core testing with B at D, I'm using the compiler which to be installed via Ubuntu's repository:
> >> gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1)
> >>
> >> >
> >> > Thanks,
> >> > Daniel
> >> >
> >> > > > > > > -----Original Message-----
> >> > > > > > > From: cip-dev-bounces at lists.cip-project.org
> >> > > > > > > [mailto:cip-dev-bounces at lists.cip-project.org] On 
> >> > > > > > > Behalf Of Daniel Sangorrin
> >> > > > > > > Sent: Tuesday, December 19, 2017 8:40 AM
> >> > > > > > > To: 'Daniel Wagner' <daniel.wagner@siemens.com>
> >> > > > > > > Cc: cip-dev at lists.cip-project.org
> >> > > > > > > Subject: Re: [cip-dev] B at D: iwg20m support
> >> > > > > > >
> >> > > > > > > Dear Daniel Wagner,
> >> > > > > > >
> >> > > > > > > > -----Original Message-----
> >> > > > > > > > From: Daniel Wagner 
> >> > > > > > > > [mailto:daniel.wagner at siemens.com]
> >> > > > > > > > Sent: Monday, December 18, 2017 8:36 PM
> >> > > > > > > > To: Daniel Sangorrin
> >> > > > > > > > Cc: cip-dev at lists.cip-project.org
> >> > > > > > > Subject: Re: [cip-dev] B at D: iwg20m support
> >> > > > > > > >
> >> > > > > > > > Hi Daniel,
> >> > > > > > > >
> >> > > > > > > > On 12/14/2017 06:57 AM, Daniel Sangorrin wrote:
> >> > > > > > > > > Hi Trung-san, Robert and all
> >> > > > > > > > >
> >> > > > > > > > > I received the AWS credentials from Agustin and 
> >> > > > > > > > > uploaded the cip-core binaries for the Renesas iwg20m board.
> >> > > > > > > > >
> >> > > > > > > > > https://s3-us-west-2.amazonaws.com/download.cip-project.
> >> > > > > > > > > or
> >> > > > > > > > > g/ci
> >> > > > > > > > > p- co re /iwg20m/core-image-minimal-iwg20m.cpio.gz
> >> > > > > > > > > https://s3-us-west-2.amazonaws.com/download.cip-project.
> >> > > > > > > > > or
> >> > > > > > > > > g/ci
> >> > > > > > > > > p-
> >> > > > > > > > > co
> >> > > > > > > > > re
> >> > > > > > > > > /iwg20m/r8a7743-iwg20d-q7.dtb 
> >> > > > > > > > > https://s3-us-west-2.amazonaws.com/download.cip-project.
> >> > > > > > > > > or
> >> > > > > > > > > g/ci
> >> > > > > > > > > p-
> >> > > > > > > > > co
> >> > > > > > > > > re
> >> > > > > > > > > /iwg20m/uImage
> >> > > > > > > >
> >> > > > > > > > Just out of curiosity: how did you build the root fs?
> >> > > > > > > > The naming indicates that you used Yocto. I am still 
> >> > > > > > > > setting up my test environment for rt testing and wrote two kas files to create me a root fs:
> >> > > > > > > >
> >> > > > > > > > https://github.com/igaw/cip-rt-misc/blob/master/docs/
> >> > > > > > > > ka
> >> > > > > > > > s-b
> >> > > > > > > > bb
> >> > > > > > > > .yml
> >> > > > > > > > https://github.com/igaw/cip-rt-misc/blob/master/docs/
> >> > > > > > > > ka
> >> > > > > > > > s-m
> >> > > > > > > > in
> >> > > > > > > > nowb
> >> > > > > > > > oa
> >> > > > > > > > rd
> >> > > > > > > > .y
> >> > > > > > > > ml
> >> > > > > > > >
> >> > > > > > > > They are not self contained yet. Will fixed that right now.
> >> > > > > > > > The idea that you can write
> >> > > > > > > >
> >> > > > > > > >         kas build kas-bbb.yml
> >> > > > > > > >
> >> > > > > > > > and you get a root fs for testing.
> >> > > > > > >
> >> > > > > > > The CIP Core rootfs was built using Deby (poky build 
> >> > > > > > > system
> >> > > > > > > + meta-debian). You can see a tutorial in the CIP wiki and a more up-to- date README and kas file in the source code.
> >> > > > > > >
> >> > > > > > > https://wiki.linuxfoundation.org/civilinfrastructurepla
> >> > > > > > > tf
> >> > > > > > > orm
> >> > > > > > > /c
> >> > > > > > > ip-c
> >> > > > > > > or
> >> > > > > > > e-
> >> > > > > > > quickstart
> >> > > > > > > https://gitlab.com/cip-project/cip-core/blob/master/deb
> >> > > > > > > y/
> >> > > > > > > pok
> >> > > > > > > y/
> >> > > > > > > meta
> >> > > > > > > -c
> >> > > > > > > ip
> >> > > > > > > -iwg20m/README.IWG20M.txt 
> >> > > > > > > https://gitlab.com/cip-project/cip-core/blob/master/deb
> >> > > > > > > y/
> >> > > > > > > pok
> >> > > > > > > y/
> >> > > > > > > meta
> >> > > > > > > -c
> >> > > > > > > ip
> >> > > > > > > -iwg20m/kas-iwg20m.yml
> >> > > > > > >
> >> > > > > > > An overview of the CIP Core is here:
> >> > > > > > > https://wiki.linuxfoundation.org/civilinfrastructurepla
> >> > > > > > > tf
> >> > > > > > > orm
> >> > > > > > > /c
> >> > > > > > > ip-c
> >> > > > > > > or e
> >> > > > > > > https://gitlab.com/cip-project/cip-core/blob/master/deb
> >> > > > > > > y/
> >> > > > > > > REA
> >> > > > > > > DM
> >> > > > > > > E.md
> >> > > > > > >
> >> > > > > > > For the BBB please check this other Readme and kas file:
> >> > > > > > > https://gitlab.com/cip-project/cip-core/blob/master/deb
> >> > > > > > > y/
> >> > > > > > > pok
> >> > > > > > > y/
> >> > > > > > > meta
> >> > > > > > > -c
> >> > > > > > > ip
> >> > > > > > > -bbb/README.BBB.txt
> >> > > > > > > https://gitlab.com/cip-project/cip-core/blob/master/deb
> >> > > > > > > y/
> >> > > > > > > pok
> >> > > > > > > y/
> >> > > > > > > meta
> >> > > > > > > -c
> >> > > > > > > ip
> >> > > > > > > -bbb/kas-bbb.yml
> >> > > > > > >
> >> > > > > > > You can add the packages "openssh nfs-utils rt-tests strace procps", they are available in meta-debian.
> >> > > > > > >
> >> > > > > > > Unfortunately, you cannot simply add "meta-qt5" because 
> >> > > > > > > it may conflict with meta-debian. Instead you would 
> >> > > > > > > need to use meta- debian qt5 recipes (only if you 
> >> > > > > > > really need
> >> > > > > > > qt5 for
> >> testing RT).
> >> > > > > > >
> >> > > > > > > Thanks,
> >> > > > > > > Daniel Sangorrin
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > > > _______________________________________________
> >> > > > > > > cip-dev mailing list
> >> > > > > > > cip-dev at lists.cip-project.org 
> >> > > > > > > https://lists.cip-project.org/mailman/listinfo/cip-dev
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > >
> >> > >
> >> > >
> >> >
> >
> >
> > _______________________________________________
> > cip-dev mailing list
> > cip-dev at lists.cip-project.org
> > https://lists.cip-project.org/mailman/listinfo/cip-dev