From: Pavel Machek <pavel@nabladev.com>
To: tommaso.merciai.xr@bp.renesas.com
Cc: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
tomm.merciai@gmail.com
Subject: Re: [cip-dev] [PATCH 6.1.y-cip 18/22] hwmon: (tmp108) Add NXP p3t1085 support
Date: Fri, 9 Jan 2026 11:29:45 +0100 [thread overview]
Message-ID: <aWDYmZhusaYmPaUw@duo.ucw.cz> (raw)
In-Reply-To: <20260108092823.489287-19-tommaso.merciai.xr@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 694 bytes --]
Hi!
> Add compatible string 'nxp,p3t1085' since p3t1085's register layout is the
> same as tmp108.
> +++ b/drivers/hwmon/Kconfig
> @@ -2063,7 +2063,7 @@ config SENSORS_TMP108
> select REGMAP_I2C
> help
> If you say yes here you get support for Texas Instruments TMP108
> - sensor chips.
> + sensor chips and NXP P3T1085.
>
I believe this should be something like
"Enable this driver to get get support for Texas Instruments TMP108
and NXP P3T1085 sensor chips."
Plus, this should really modify the config "" text, otherwise users
will not see this supports P3T1085 unless they open help...?
Best regards,
Pavel
--
In cooperation with Nabla.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
next prev parent reply other threads:[~2026-01-09 10:30 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 9:28 [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 01/22] bitops: add generic parity calculation for u8 Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 02/22] dt-bindings: i3c: Add Renesas I3C controller Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 03/22] i3c: controllers do not need to depend on I3C Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 04/22] i3c: master: Add basic driver for the Renesas I3C controller Tommaso Merciai
2026-01-09 10:22 ` [cip-dev] " Pavel Machek
2026-01-09 11:58 ` Tommaso Merciai
2026-01-14 11:43 ` Pavel Machek
2026-01-14 11:53 ` Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 05/22] i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 06/22] i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 07/22] i3c: Standardize defines for specification parameters Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 08/22] i3c: Add more parameters for controllers to the header Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 09/22] i3c: master: Add helpers for DMA mapping and bounce buffer handling Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 10/22] i3c: document i3c_xfers Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 11/22] i3c: master: Add inline i3c_readl_fifo() and i3c_writel_fifo() Tommaso Merciai
2026-01-09 10:26 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 12/22] i3c: Correct the macro module_i3c_i2c_driver Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 13/22] i3c: export SETDASA method Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 14/22] clk: renesas: r9a09g047: Add I3C0 clocks and resets Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 15/22] arm64: dts: renesas: r9a09g047: Add I3C node Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 16/22] dt-bindings: hwmon: ti,tmp108: document V+ supply, add short description Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 17/22] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 18/22] hwmon: (tmp108) Add NXP p3t1085 support Tommaso Merciai
2026-01-09 10:29 ` Pavel Machek [this message]
2026-01-08 9:28 ` [PATCH 6.1.y-cip 19/22] hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 20/22] hwmon: (tmp108) Add support for I3C device Tommaso Merciai
2026-01-09 10:32 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 21/22] hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 22/22] hwmon: (tmp108) Add basic regulator support Tommaso Merciai
2026-01-09 10:39 ` [cip-dev] [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E Pavel Machek
2026-01-09 12:08 ` Tommaso Merciai
2026-01-13 5:43 ` nobuhiro.iwamatsu.x90
2026-01-15 8:50 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aWDYmZhusaYmPaUw@duo.ucw.cz \
--to=pavel@nabladev.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tomm.merciai@gmail.com \
--cc=tommaso.merciai.xr@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox