From: Pavel Machek <pavel@nabladev.com>
To: tommaso.merciai.xr@bp.renesas.com
Cc: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
tomm.merciai@gmail.com
Subject: Re: [cip-dev] [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E
Date: Fri, 9 Jan 2026 11:39:56 +0100 [thread overview]
Message-ID: <aWDa/P7QVLdqjKrA@duo.ucw.cz> (raw)
In-Reply-To: <20260108092823.489287-1-tommaso.merciai.xr@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 878 bytes --]
Hi!
> This series adds I3C support for the Renesas RZ/G3E SoC into
> linux-6.1.y-cip kernel. This includes also nxp,p3t1085 I3C backporting
> for testing purposes.
> Tested using the NXP P3T1085UK-ARD connected to the RZ/G3E SMARC SoM
> via the RZ/G3E SMARC BREAKOUT board.
Do we really need to add nxp,p3t1085 ? AFAICT people would need
special hardware, and then would have to patch their dts anyway.
I'd propose not to include these in -cip, as we could test them in the
test farm, and it is just for testing anyway.
I had some minor comments, but those should not block the merge.
Reviewed-by: Pavel Machek <pavel@nabladev.com>
I can apply the series after 6.12 version, if it passes testing and
there are no other comments.
Best regards,
Pavel
--
In cooperation with Nabla.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
next prev parent reply other threads:[~2026-01-09 10:40 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 9:28 [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 01/22] bitops: add generic parity calculation for u8 Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 02/22] dt-bindings: i3c: Add Renesas I3C controller Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 03/22] i3c: controllers do not need to depend on I3C Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 04/22] i3c: master: Add basic driver for the Renesas I3C controller Tommaso Merciai
2026-01-09 10:22 ` [cip-dev] " Pavel Machek
2026-01-09 11:58 ` Tommaso Merciai
2026-01-14 11:43 ` Pavel Machek
2026-01-14 11:53 ` Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 05/22] i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 06/22] i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 07/22] i3c: Standardize defines for specification parameters Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 08/22] i3c: Add more parameters for controllers to the header Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 09/22] i3c: master: Add helpers for DMA mapping and bounce buffer handling Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 10/22] i3c: document i3c_xfers Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 11/22] i3c: master: Add inline i3c_readl_fifo() and i3c_writel_fifo() Tommaso Merciai
2026-01-09 10:26 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 12/22] i3c: Correct the macro module_i3c_i2c_driver Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 13/22] i3c: export SETDASA method Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 14/22] clk: renesas: r9a09g047: Add I3C0 clocks and resets Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 15/22] arm64: dts: renesas: r9a09g047: Add I3C node Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 16/22] dt-bindings: hwmon: ti,tmp108: document V+ supply, add short description Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 17/22] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 18/22] hwmon: (tmp108) Add NXP p3t1085 support Tommaso Merciai
2026-01-09 10:29 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 19/22] hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 20/22] hwmon: (tmp108) Add support for I3C device Tommaso Merciai
2026-01-09 10:32 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 21/22] hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 22/22] hwmon: (tmp108) Add basic regulator support Tommaso Merciai
2026-01-09 10:39 ` Pavel Machek [this message]
2026-01-09 12:08 ` [cip-dev] [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E Tommaso Merciai
2026-01-13 5:43 ` nobuhiro.iwamatsu.x90
2026-01-15 8:50 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aWDa/P7QVLdqjKrA@duo.ucw.cz \
--to=pavel@nabladev.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tomm.merciai@gmail.com \
--cc=tommaso.merciai.xr@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox