[PATCH 6.12.y-cip 00/24] Add RZ/V2H display support

[PATCH 6.12.y-cip 00/24] Add RZ/V2H display support

[Ovidiu Panait]

Hi,

This series adds display support for the Renesas RZ/V2H SoC and EVK board.

All patches were cherry-picked from mainline kernel.

Best regards,
Ovidiu

Hugo Villeneuve (1):
  dt-bindings: display: bridge: renesas,dsi: allow properties from
    dsi-controller

Lad Prabhakar (23):
  dt-bindings: display: bridge: renesas,dsi: Document RZ/V2H(P) and
    RZ/V2N
  media: dt-bindings: media: renesas,vsp1: Document RZ/V2H(P)
  media: dt-bindings: media: renesas,fcp: Document RZ/V2H(P) SoC
  dt-bindings: display: renesas,rzg2l-du: Add support for RZ/V2H(P) SoC
  clk: renesas: rzv2h: Add instance field to struct pll
  clk: renesas: rzv2h: Use GENMASK for PLL fields
  clk: renesas: rzv2h: Add support for DSI clocks
  clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
  drm: renesas: rz-du: mipi_dsi: Simplify HSFREQ calculation
  drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculation
  drm: renesas: rz-du: mipi_dsi: Add OF data support
  drm: renesas: rz-du: mipi_dsi: Make "rst" reset control optional for
    RZ/V2H(P)
  drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency
    calculations
  drm: renesas: rz-du: mipi_dsi: Add feature flag for 16BPP support
  drm: renesas: rz-du: mipi_dsi: Add dphy_late_init() callback for
    RZ/V2H(P)
  drm: renesas: rz-du: mipi_dsi: Add function pointers for configuring
    VCLK and mode validation
  drm: renesas: rz-du: mipi_dsi: Add LPCLK clock support
  drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
  drm: renesas: rz-du: Add support for RZ/V2H(P) SoC
  drm: renesas: rz-du: Drop ARCH_RZG2L dependency
  arm64: dts: renesas: r9a09g057: Add FCPV and VSPD nodes
  arm64: dts: renesas: r9a09g057: Add DU and DSI nodes
  arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable DU and DSI

 .../bindings/display/bridge/renesas,dsi.yaml  | 187 +++++-
 .../bindings/display/renesas,rzg2l-du.yaml    |  23 +-
 .../bindings/media/renesas,fcp.yaml           |   2 +
 .../bindings/media/renesas,vsp1.yaml          |   1 +
 arch/arm64/boot/dts/renesas/r9a09g057.dtsi    |  89 +++
 .../dts/renesas/r9a09g057h44-rzv2h-evk.dts    |  71 +++
 drivers/clk/renesas/r9a09g057-cpg.c           |  62 ++
 drivers/clk/renesas/rzv2h-cpg.c               | 512 ++++++++++++++-
 drivers/clk/renesas/rzv2h-cpg.h               |  29 +-
 drivers/gpu/drm/renesas/rz-du/Kconfig         |   2 +-
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  |  11 +
 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 601 ++++++++++++++++--
 .../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h   |  36 +-
 include/linux/clk/renesas.h                   | 145 +++++
 14 files changed, 1689 insertions(+), 82 deletions(-)

-- 
2.51.0

[PATCH 6.12.y-cip 01/24] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller

[Ovidiu Panait]

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

commit 3e3169e64e3154770f263451cc821b4c3f043cc0 upstream.

Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:

rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
    match any of the regexes: 'pinctrl-[0-9]+'
    from schema $id:
        http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#

Also add a panel property to the example.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../bindings/display/bridge/renesas,dsi.yaml  | 67 ++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
index e08c24633926..5a99d9b9635e 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -128,7 +128,7 @@ required:
   - power-domains
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -180,4 +180,69 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi1: dsi@10860000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10860000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi1_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi1_in: endpoint {
+                    remote-endpoint = <&du_out_dsi1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi1_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
 ...
-- 
2.51.0

[PATCH 6.12.y-cip 02/24] dt-bindings: display: bridge: renesas,dsi: Document RZ/V2H(P) and RZ/V2N

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit ddeb8d5c1f97d9112b93a779c9e3dc3eaab68c19 upstream.

Add the compatible string "renesas,r9a09g057-mipi-dsi" for the Renesas
RZ/V2H(P) (R9A09G057) SoC. While the MIPI DSI LINK registers are shared
with the RZ/G2L SoC, the D-PHY register layout differs. Additionally, the
RZ/V2H(P) uses only two resets compared to three on RZ/G2L, and requires
five clocks instead of six.

To reflect these hardware differences, update the binding schema to
support the reduced clock and reset requirements for RZ/V2H(P).

Since the RZ/V2N (R9A09G056) SoC integrates an identical DSI IP to
RZ/V2H(P), the same "renesas,r9a09g057-mipi-dsi" compatible string is
reused for RZ/V2N.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../bindings/display/bridge/renesas,dsi.yaml  | 120 +++++++++++++-----
 1 file changed, 91 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
index 5a99d9b9635e..c20625b8425e 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -14,16 +14,21 @@ description: |
   RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
   up to four data lanes.
 
-allOf:
-  - $ref: /schemas/display/dsi-controller.yaml#
-
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+              - renesas,r9a07g054-mipi-dsi # RZ/V2L
+          - const: renesas,rzg2l-mipi-dsi
+
+      - items:
+          - const: renesas,r9a09g056-mipi-dsi # RZ/V2N
+          - const: renesas,r9a09g057-mipi-dsi
+
       - enum:
-          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
-          - renesas,r9a07g054-mipi-dsi # RZ/V2L
-      - const: renesas,rzg2l-mipi-dsi
+          - renesas,r9a09g057-mipi-dsi # RZ/V2H(P)
 
   reg:
     maxItems: 1
@@ -49,34 +54,56 @@ properties:
       - const: debug
 
   clocks:
-    items:
-      - description: DSI D-PHY PLL multiplied clock
-      - description: DSI D-PHY system clock
-      - description: DSI AXI bus clock
-      - description: DSI Register access clock
-      - description: DSI Video clock
-      - description: DSI D-PHY Escape mode transmit clock
+    oneOf:
+      - items:
+          - description: DSI D-PHY PLL multiplied clock
+          - description: DSI D-PHY system clock
+          - description: DSI AXI bus clock
+          - description: DSI Register access clock
+          - description: DSI Video clock
+          - description: DSI D-PHY Escape mode transmit clock
+      - items:
+          - description: DSI D-PHY PLL reference clock
+          - description: DSI AXI bus clock
+          - description: DSI Register access clock
+          - description: DSI Video clock
+          - description: DSI D-PHY Escape mode transmit clock
 
   clock-names:
-    items:
-      - const: pllclk
-      - const: sysclk
-      - const: aclk
-      - const: pclk
-      - const: vclk
-      - const: lpclk
+    oneOf:
+      - items:
+          - const: pllclk
+          - const: sysclk
+          - const: aclk
+          - const: pclk
+          - const: vclk
+          - const: lpclk
+      - items:
+          - const: pllrefclk
+          - const: aclk
+          - const: pclk
+          - const: vclk
+          - const: lpclk
 
   resets:
-    items:
-      - description: MIPI_DSI_CMN_RSTB
-      - description: MIPI_DSI_ARESET_N
-      - description: MIPI_DSI_PRESET_N
+    oneOf:
+      - items:
+          - description: MIPI_DSI_CMN_RSTB
+          - description: MIPI_DSI_ARESET_N
+          - description: MIPI_DSI_PRESET_N
+      - items:
+          - description: MIPI_DSI_ARESET_N
+          - description: MIPI_DSI_PRESET_N
 
   reset-names:
-    items:
-      - const: rst
-      - const: arst
-      - const: prst
+    oneOf:
+      - items:
+          - const: rst
+          - const: arst
+          - const: prst
+      - items:
+          - const: arst
+          - const: prst
 
   power-domains:
     maxItems: 1
@@ -130,6 +157,41 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-mipi-dsi
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+
+        clock-names:
+          maxItems: 5
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          maxItems: 2
+    else:
+      properties:
+        clocks:
+          minItems: 6
+
+        clock-names:
+          minItems: 6
+
+        resets:
+          minItems: 3
+
+        reset-names:
+          minItems: 3
+
 examples:
   - |
     #include <dt-bindings/clock/r9a07g044-cpg.h>
-- 
2.51.0

[PATCH 6.12.y-cip 03/24] media: dt-bindings: media: renesas,vsp1: Document RZ/V2H(P)

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit f6e9968aeb200aa6d399ac73338174b394677049 upstream.

The VSPD block on the RZ/V2H(P) SoC is identical to the one found on the
RZ/G2L SoC.

No driver changes are required, as `renesas,r9a07g044-vsp2` will be used
as a fallback compatible string on the RZ/V2H(P) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250408193158.80936-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 Documentation/devicetree/bindings/media/renesas,vsp1.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
index 1a03e67462a4..9d03b972f522 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -25,6 +25,7 @@ properties:
           - enum:
               - renesas,r9a07g043u-vsp2   # RZ/G2UL
               - renesas,r9a07g054-vsp2    # RZ/V2L
+              - renesas,r9a09g057-vsp2    # RZ/V2H(P)
           - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
 
   reg:
-- 
2.51.0

[PATCH 6.12.y-cip 04/24] media: dt-bindings: media: renesas,fcp: Document RZ/V2H(P) SoC

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 079afc0b7241e383cf61e5ede906104d85f7a6cb upstream.

The FCPVD block on the RZ/V2H(P) SoC is identical to the one found on the
RZ/G2L SoC.

No driver changes are required, as `renesas,fcpv` will be used as a
fallback compatible string on the RZ/V2H(P) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250408193158.80936-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 Documentation/devicetree/bindings/media/renesas,fcp.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
index f94dacd96278..5ed9427fb757 100644
--- a/Documentation/devicetree/bindings/media/renesas,fcp.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -30,6 +30,7 @@ properties:
               - renesas,r9a07g043u-fcpvd # RZ/G2UL
               - renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
               - renesas,r9a07g054-fcpvd # RZ/V2L
+              - renesas,r9a09g057-fcpvd # RZ/V2H(P)
           - const: renesas,fcpv         # Generic FCP for VSP fallback
 
   reg:
@@ -66,6 +67,7 @@ allOf:
               - renesas,r9a07g043u-fcpvd
               - renesas,r9a07g044-fcpvd
               - renesas,r9a07g054-fcpvd
+              - renesas,r9a09g057-fcpvd
     then:
       properties:
         clocks:
-- 
2.51.0

[PATCH 6.12.y-cip 05/24] dt-bindings: display: renesas,rzg2l-du: Add support for RZ/V2H(P) SoC

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit ed6a6d63513ee5199841c0a0dc2772ad944e63ee upstream.

The DU block on the RZ/V2H(P) SoC is identical to the one found on the
RZ/G2L SoC. However, it only supports the DSI interface, whereas the
RZ/G2L supports both DSI and DPI interfaces.

Due to this difference, a SoC-specific compatible string
'renesas,r9a09g057-du' is added for the RZ/V2H(P) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../bindings/display/renesas,rzg2l-du.yaml    | 23 ++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
index 95e3d5e74b87..1e32d14b6edb 100644
--- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -20,6 +20,7 @@ properties:
       - enum:
           - renesas,r9a07g043u-du # RZ/G2UL
           - renesas,r9a07g044-du # RZ/G2{L,LC}
+          - renesas,r9a09g057-du # RZ/V2H(P)
       - items:
           - enum:
               - renesas,r9a07g054-du    # RZ/V2L
@@ -101,7 +102,12 @@ allOf:
 
           required:
             - port@0
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-du
+    then:
       properties:
         ports:
           properties:
@@ -113,6 +119,21 @@ allOf:
           required:
             - port@0
             - port@1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-du
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              description: DSI
+            port@1: false
+
+          required:
+            - port@0
 
 examples:
   # RZ/G2L DU
-- 
2.51.0

[PATCH 6.12.y-cip 06/24] clk: renesas: rzv2h: Add instance field to struct pll

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 36a23904b4def05bfbb589af9fab5bc06144d241 upstream.

Add a two-bit "instance" member to struct pll and extend the PLL_PACK()
macro to accept an instance parameter.  Initialize all existing PLL
definitions with instance 0 to preserve legacy behavior. This change
enables support for SoCs with multiple PLL instances (for example,
RZ/G3E we have two PLL DSIs).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251015192611.241920-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/clk/renesas/rzv2h-cpg.h | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/renesas/rzv2h-cpg.h b/drivers/clk/renesas/rzv2h-cpg.h
index 53f3b96cd85f..02920f169bf3 100644
--- a/drivers/clk/renesas/rzv2h-cpg.h
+++ b/drivers/clk/renesas/rzv2h-cpg.h
@@ -16,20 +16,23 @@
  *
  * @offset: STBY register offset
  * @has_clkn: Flag to indicate if CLK1/2 are accessible or not
+ * @instance: PLL instance number
  */
 struct pll {
 	unsigned int offset:9;
 	unsigned int has_clkn:1;
+	unsigned int instance:2;
 };
 
-#define PLL_PACK(_offset, _has_clkn) \
+#define PLL_PACK(_offset, _has_clkn, _instance) \
 	((struct pll){ \
 		.offset = _offset, \
-		.has_clkn = _has_clkn \
+		.has_clkn = _has_clkn, \
+		.instance = _instance \
 	})
 
-#define PLLCA55		PLL_PACK(0x60, 1)
-#define PLLGPU		PLL_PACK(0x120, 1)
+#define PLLCA55		PLL_PACK(0x60, 1, 0)
+#define PLLGPU		PLL_PACK(0x120, 1, 0)
 
 /**
  * struct ddiv - Structure for dynamic switching divider
-- 
2.51.0

[PATCH 6.12.y-cip 07/24] clk: renesas: rzv2h: Use GENMASK for PLL fields

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit a8943f7f0a736e211faa400fa9df1af8dd945347 upstream.

Replace the older FIELD_GET-wrapping helper macros with plain GENMASK
definitions for the PLL CLK1/CLK2 field masks (CPG_PLL_CLK1_KDIV,
CPG_PLL_CLK1_MDIV, CPG_PLL_CLK1_PDIV and CPG_PLL_CLK2_SDIV). Update
rzv2h_cpg_pll_clk_recalc_rate() to explicitly extract those fields with
FIELD_GET and cast the KDIV extraction to s16 to ensure proper sign
extension when computing the PLL output rate.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251015192611.241920-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/clk/renesas/rzv2h-cpg.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/renesas/rzv2h-cpg.c b/drivers/clk/renesas/rzv2h-cpg.c
index f468afbb54e2..125e7aa05ebd 100644
--- a/drivers/clk/renesas/rzv2h-cpg.c
+++ b/drivers/clk/renesas/rzv2h-cpg.c
@@ -49,11 +49,11 @@
 #define CPG_PLL_STBY_RESETB	BIT(0)
 #define CPG_PLL_STBY_RESETB_WEN	BIT(16)
 #define CPG_PLL_CLK1(x)		((x) + 0x004)
-#define CPG_PLL_CLK1_KDIV(x)	((s16)FIELD_GET(GENMASK(31, 16), (x)))
-#define CPG_PLL_CLK1_MDIV(x)	FIELD_GET(GENMASK(15, 6), (x))
-#define CPG_PLL_CLK1_PDIV(x)	FIELD_GET(GENMASK(5, 0), (x))
+#define CPG_PLL_CLK1_KDIV	GENMASK(31, 16)
+#define CPG_PLL_CLK1_MDIV	GENMASK(15, 6)
+#define CPG_PLL_CLK1_PDIV	GENMASK(5, 0)
 #define CPG_PLL_CLK2(x)		((x) + 0x008)
-#define CPG_PLL_CLK2_SDIV(x)	FIELD_GET(GENMASK(2, 0), (x))
+#define CPG_PLL_CLK2_SDIV	GENMASK(2, 0)
 #define CPG_PLL_MON(x)		((x) + 0x010)
 #define CPG_PLL_MON_RESETB	BIT(0)
 #define CPG_PLL_MON_LOCK	BIT(4)
@@ -231,10 +231,11 @@ static unsigned long rzv2h_cpg_pll_clk_recalc_rate(struct clk_hw *hw,
 	clk1 = readl(priv->base + CPG_PLL_CLK1(pll.offset));
 	clk2 = readl(priv->base + CPG_PLL_CLK2(pll.offset));
 
-	rate = mul_u64_u32_shr(parent_rate, (CPG_PLL_CLK1_MDIV(clk1) << 16) +
-			       CPG_PLL_CLK1_KDIV(clk1), 16 + CPG_PLL_CLK2_SDIV(clk2));
+	rate = mul_u64_u32_shr(parent_rate, (FIELD_GET(CPG_PLL_CLK1_MDIV, clk1) << 16) +
+			       (s16)FIELD_GET(CPG_PLL_CLK1_KDIV, clk1),
+			       16 + FIELD_GET(CPG_PLL_CLK2_SDIV, clk2));
 
-	return DIV_ROUND_CLOSEST_ULL(rate, CPG_PLL_CLK1_PDIV(clk1));
+	return DIV_ROUND_CLOSEST_ULL(rate, FIELD_GET(CPG_PLL_CLK1_PDIV, clk1));
 }
 
 static const struct clk_ops rzv2h_cpg_pll_ops = {
-- 
2.51.0

[PATCH 6.12.y-cip 08/24] clk: renesas: rzv2h: Add support for DSI clocks

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit f864e4b721e386be132cc973eadefe5d52cdfd94 upstream.

Add support for PLLDSI and its post-dividers in the RZ/V2H CPG driver and
export helper APIs for use by the DSI driver.

Introduce per-PLL-DSI state in the CPG private structure and provide a
set of helper functions that find valid PLL parameter combinations for
a requested frequency. The new helpers are rzv2h_get_pll_pars(),
rzv2h_get_pll_div_pars(), rzv2h_get_pll_divs_pars() and
rzv2h_get_pll_dtable_pars() and they are exported in the "RZV2H_CPG"
namespace for use by other consumers (notably the DSI driver). These
helpers perform iterative searches over PLL parameters (M, K, P, S)
and optional post-dividers and return the best match (or an exact
match when possible).

Move PLL/CLK related limits and parameter types into the shared
include (include/linux/clk/renesas.h) by adding struct rzv2h_pll_limits,
struct rzv2h_pll_pars and struct rzv2h_pll_div_pars plus the
RZV2H_CPG_PLL_DSI_LIMITS() helper macro to define DSI PLL limits.

This change centralises the PLLDSI algorithms so the CPG and DSI
drivers compute PLL parameters consistently and allows the DSI driver
to accurately request rates and program its PLL.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251015192611.241920-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[OP: Dropped double quotes arround EXPORT_SYMBOL_NS_GPL()]
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/clk/renesas/rzv2h-cpg.c | 497 ++++++++++++++++++++++++++++++++
 drivers/clk/renesas/rzv2h-cpg.h |  19 +-
 include/linux/clk/renesas.h     | 145 ++++++++++
 3 files changed, 659 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/rzv2h-cpg.c b/drivers/clk/renesas/rzv2h-cpg.c
index 125e7aa05ebd..3eedd173ab1c 100644
--- a/drivers/clk/renesas/rzv2h-cpg.c
+++ b/drivers/clk/renesas/rzv2h-cpg.c
@@ -14,9 +14,14 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/renesas.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/iopoll.h>
+#include <linux/limits.h>
+#include <linux/math.h>
+#include <linux/math64.h>
+#include <linux/minmax.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -26,6 +31,7 @@
 #include <linux/refcount.h>
 #include <linux/reset-controller.h>
 #include <linux/string_choices.h>
+#include <linux/units.h>
 
 #include <dt-bindings/clock/renesas-cpg-mssr.h>
 
@@ -47,7 +53,9 @@
 
 #define CPG_PLL_STBY(x)		((x))
 #define CPG_PLL_STBY_RESETB	BIT(0)
+#define CPG_PLL_STBY_SSC_EN	BIT(2)
 #define CPG_PLL_STBY_RESETB_WEN	BIT(16)
+#define CPG_PLL_STBY_SSC_EN_WEN BIT(18)
 #define CPG_PLL_CLK1(x)		((x) + 0x004)
 #define CPG_PLL_CLK1_KDIV	GENMASK(31, 16)
 #define CPG_PLL_CLK1_MDIV	GENMASK(15, 6)
@@ -65,6 +73,22 @@
 
 #define CPG_CLKSTATUS0		(0x700)
 
+/* On RZ/G3E SoC we have two DSI PLLs */
+#define MAX_CPG_DSI_PLL		2
+
+/**
+ * struct rzv2h_pll_dsi_info - PLL DSI information, holds the limits and parameters
+ *
+ * @pll_dsi_limits: PLL DSI parameters limits
+ * @pll_dsi_parameters: Calculated PLL DSI parameters
+ * @req_pll_dsi_rate: Requested PLL DSI rate
+ */
+struct rzv2h_pll_dsi_info {
+	const struct rzv2h_pll_limits *pll_dsi_limits;
+	struct rzv2h_pll_div_pars pll_dsi_parameters;
+	unsigned long req_pll_dsi_rate;
+};
+
 /**
  * struct rzv2h_cpg_priv - Clock Pulse Generator Private Data
  *
@@ -80,6 +104,7 @@
  * @ff_mod_status_ops: Fixed Factor Module Status Clock operations
  * @mstop_count: Array of mstop values
  * @rcdev: Reset controller entity
+ * @pll_dsi_info: Array of PLL DSI information, holds the limits and parameters
  */
 struct rzv2h_cpg_priv {
 	struct device *dev;
@@ -98,6 +123,8 @@ struct rzv2h_cpg_priv {
 	atomic_t *mstop_count;
 
 	struct reset_controller_dev rcdev;
+
+	struct rzv2h_pll_dsi_info pll_dsi_info[MAX_CPG_DSI_PLL];
 };
 
 #define rcdev_to_priv(x)	container_of(x, struct rzv2h_cpg_priv, rcdev)
@@ -168,6 +195,460 @@ struct rzv2h_ff_mod_status_clk {
 #define to_rzv2h_ff_mod_status_clk(_hw) \
 	container_of(_hw, struct rzv2h_ff_mod_status_clk, fix.hw)
 
+/**
+ * struct rzv2h_plldsi_div_clk - PLL DSI DDIV clock
+ *
+ * @dtable: divider table
+ * @priv: CPG private data
+ * @hw: divider clk
+ * @ddiv: divider configuration
+ */
+struct rzv2h_plldsi_div_clk {
+	const struct clk_div_table *dtable;
+	struct rzv2h_cpg_priv *priv;
+	struct clk_hw hw;
+	struct ddiv ddiv;
+};
+
+#define to_plldsi_div_clk(_hw) \
+	container_of(_hw, struct rzv2h_plldsi_div_clk, hw)
+
+#define RZ_V2H_OSC_CLK_IN_MEGA		(24 * MEGA)
+#define RZV2H_MAX_DIV_TABLES		(16)
+
+/**
+ * rzv2h_get_pll_pars - Finds the best combination of PLL parameters
+ * for a given frequency.
+ *
+ * @limits: Pointer to the structure containing the limits for the PLL parameters
+ * @pars: Pointer to the structure where the best calculated PLL parameters values
+ * will be stored
+ * @freq_millihz: Target output frequency in millihertz
+ *
+ * This function calculates the best set of PLL parameters (M, K, P, S) to achieve
+ * the desired frequency.
+ * There is no direct formula to calculate the PLL parameters, as it's an open
+ * system of equations, therefore this function uses an iterative approach to
+ * determine the best solution. The best solution is one that minimizes the error
+ * (desired frequency - actual frequency).
+ *
+ * Return: true if a valid set of parameters values is found, false otherwise.
+ */
+bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
+			struct rzv2h_pll_pars *pars, u64 freq_millihz)
+{
+	u64 fout_min_millihz = mul_u32_u32(limits->fout.min, MILLI);
+	u64 fout_max_millihz = mul_u32_u32(limits->fout.max, MILLI);
+	struct rzv2h_pll_pars p, best;
+
+	if (freq_millihz > fout_max_millihz ||
+	    freq_millihz < fout_min_millihz)
+		return false;
+
+	/* Initialize best error to maximum possible value */
+	best.error_millihz = S64_MAX;
+
+	for (p.p = limits->p.min; p.p <= limits->p.max; p.p++) {
+		u32 fref = RZ_V2H_OSC_CLK_IN_MEGA / p.p;
+		u16 divider;
+
+		for (divider = 1 << limits->s.min, p.s = limits->s.min;
+			p.s <= limits->s.max; p.s++, divider <<= 1) {
+			for (p.m = limits->m.min; p.m <= limits->m.max; p.m++) {
+				u64 output_m, output_k_range;
+				s64 pll_k, output_k;
+				u64 fvco, output;
+
+				/*
+				 * The frequency generated by the PLL + divider
+				 * is calculated as follows:
+				 *
+				 * With:
+				 * Freq = Ffout = Ffvco / 2^(pll_s)
+				 * Ffvco = (pll_m + (pll_k / 65536)) * Ffref
+				 * Ffref = 24MHz / pll_p
+				 *
+				 * Freq can also be rewritten as:
+				 * Freq = Ffvco / 2^(pll_s)
+				 *      = ((pll_m + (pll_k / 65536)) * Ffref) / 2^(pll_s)
+				 *      = (pll_m * Ffref) / 2^(pll_s) + ((pll_k / 65536) * Ffref) / 2^(pll_s)
+				 *      = output_m + output_k
+				 *
+				 * Every parameter has been determined at this
+				 * point, but pll_k.
+				 *
+				 * Considering that:
+				 * limits->k.min <= pll_k <= limits->k.max
+				 * Then:
+				 * -0.5 <= (pll_k / 65536) < 0.5
+				 * Therefore:
+				 * -Ffref / (2 * 2^(pll_s)) <= output_k < Ffref / (2 * 2^(pll_s))
+				 */
+
+				/* Compute output M component (in mHz) */
+				output_m = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(p.m, fref) * MILLI,
+								 divider);
+				/* Compute range for output K (in mHz) */
+				output_k_range = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(fref, MILLI),
+								       2 * divider);
+				/*
+				 * No point in continuing if we can't achieve
+				 * the desired frequency
+				 */
+				if (freq_millihz <  (output_m - output_k_range) ||
+				    freq_millihz >= (output_m + output_k_range)) {
+					continue;
+				}
+
+				/*
+				 * Compute the K component
+				 *
+				 * Since:
+				 * Freq = output_m + output_k
+				 * Then:
+				 * output_k = Freq - output_m
+				 *          = ((pll_k / 65536) * Ffref) / 2^(pll_s)
+				 * Therefore:
+				 * pll_k = (output_k * 65536 * 2^(pll_s)) / Ffref
+				 */
+				output_k = freq_millihz - output_m;
+				pll_k = div_s64(output_k * 65536ULL * divider,
+						fref);
+				pll_k = DIV_S64_ROUND_CLOSEST(pll_k, MILLI);
+
+				/* Validate K value within allowed limits */
+				if (pll_k < limits->k.min ||
+				    pll_k > limits->k.max)
+					continue;
+
+				p.k = pll_k;
+
+				/* Compute (Ffvco * 65536) */
+				fvco = mul_u32_u32(p.m * 65536 + p.k, fref);
+				if (fvco < mul_u32_u32(limits->fvco.min, 65536) ||
+				    fvco > mul_u32_u32(limits->fvco.max, 65536))
+					continue;
+
+				/* PLL_M component of (output * 65536 * PLL_P) */
+				output = mul_u32_u32(p.m * 65536, RZ_V2H_OSC_CLK_IN_MEGA);
+				/* PLL_K component of (output * 65536 * PLL_P) */
+				output += p.k * RZ_V2H_OSC_CLK_IN_MEGA;
+				/* Make it in mHz */
+				output *= MILLI;
+				output = DIV_U64_ROUND_CLOSEST(output, 65536 * p.p * divider);
+
+				/* Check output frequency against limits */
+				if (output < fout_min_millihz ||
+				    output > fout_max_millihz)
+					continue;
+
+				p.error_millihz = freq_millihz - output;
+				p.freq_millihz = output;
+
+				/* If an exact match is found, return immediately */
+				if (p.error_millihz == 0) {
+					*pars = p;
+					return true;
+				}
+
+				/* Update best match if error is smaller */
+				if (abs(best.error_millihz) > abs(p.error_millihz))
+					best = p;
+			}
+		}
+	}
+
+	/* If no valid parameters were found, return false */
+	if (best.error_millihz == S64_MAX)
+		return false;
+
+	*pars = best;
+	return true;
+}
+EXPORT_SYMBOL_NS_GPL(rzv2h_get_pll_pars, RZV2H_CPG);
+
+/*
+ * rzv2h_get_pll_divs_pars - Finds the best combination of PLL parameters
+ * and divider value for a given frequency.
+ *
+ * @limits: Pointer to the structure containing the limits for the PLL parameters
+ * @pars: Pointer to the structure where the best calculated PLL parameters and
+ * divider values will be stored
+ * @table: Pointer to the array of valid divider values
+ * @table_size: Size of the divider values array
+ * @freq_millihz: Target output frequency in millihertz
+ *
+ * This function calculates the best set of PLL parameters (M, K, P, S) and divider
+ * value to achieve the desired frequency. See rzv2h_get_pll_pars() for more details
+ * on how the PLL parameters are calculated.
+ *
+ * freq_millihz is the desired frequency generated by the PLL followed by a
+ * a gear.
+ */
+bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+			     struct rzv2h_pll_div_pars *pars,
+			     const u8 *table, u8 table_size, u64 freq_millihz)
+{
+	struct rzv2h_pll_div_pars p, best;
+
+	best.div.error_millihz = S64_MAX;
+	p.div.error_millihz = S64_MAX;
+	for (unsigned int i = 0; i < table_size; i++) {
+		if (!rzv2h_get_pll_pars(limits, &p.pll, freq_millihz * table[i]))
+			continue;
+
+		p.div.divider_value = table[i];
+		p.div.freq_millihz = DIV_U64_ROUND_CLOSEST(p.pll.freq_millihz, table[i]);
+		p.div.error_millihz = freq_millihz - p.div.freq_millihz;
+
+		if (p.div.error_millihz == 0) {
+			*pars = p;
+			return true;
+		}
+
+		if (abs(best.div.error_millihz) > abs(p.div.error_millihz))
+			best = p;
+	}
+
+	if (best.div.error_millihz == S64_MAX)
+		return false;
+
+	*pars = best;
+	return true;
+}
+EXPORT_SYMBOL_NS_GPL(rzv2h_get_pll_divs_pars, RZV2H_CPG);
+
+static unsigned long rzv2h_cpg_plldsi_div_recalc_rate(struct clk_hw *hw,
+						      unsigned long parent_rate)
+{
+	struct rzv2h_plldsi_div_clk *dsi_div = to_plldsi_div_clk(hw);
+	struct rzv2h_cpg_priv *priv = dsi_div->priv;
+	struct ddiv ddiv = dsi_div->ddiv;
+	u32 div;
+
+	div = readl(priv->base + ddiv.offset);
+	div >>= ddiv.shift;
+	div &= clk_div_mask(ddiv.width);
+	div = dsi_div->dtable[div].div;
+
+	return DIV_ROUND_CLOSEST_ULL(parent_rate, div);
+}
+
+static int rzv2h_cpg_plldsi_div_determine_rate(struct clk_hw *hw,
+					       struct clk_rate_request *req)
+{
+	struct rzv2h_plldsi_div_clk *dsi_div = to_plldsi_div_clk(hw);
+	struct pll_clk *pll_clk = to_pll(clk_hw_get_parent(hw));
+	struct rzv2h_cpg_priv *priv = dsi_div->priv;
+	u8 table[RZV2H_MAX_DIV_TABLES] = { 0 };
+	struct rzv2h_pll_div_pars *dsi_params;
+	struct rzv2h_pll_dsi_info *dsi_info;
+	const struct clk_div_table *div;
+	unsigned int i = 0;
+	u64 rate_millihz;
+
+	dsi_info = &priv->pll_dsi_info[pll_clk->pll.instance];
+	dsi_params = &dsi_info->pll_dsi_parameters;
+
+	rate_millihz = mul_u32_u32(req->rate, MILLI);
+	if (rate_millihz == dsi_params->div.error_millihz + dsi_params->div.freq_millihz)
+		goto exit_determine_rate;
+
+	for (div = dsi_div->dtable; div->div; div++) {
+		if (i >= RZV2H_MAX_DIV_TABLES)
+			return -EINVAL;
+		table[i++] = div->div;
+	}
+
+	if (!rzv2h_get_pll_divs_pars(dsi_info->pll_dsi_limits, dsi_params, table, i,
+				     rate_millihz)) {
+		dev_err(priv->dev, "failed to determine rate for req->rate: %lu\n",
+			req->rate);
+		return -EINVAL;
+	}
+
+exit_determine_rate:
+	req->rate = DIV_ROUND_CLOSEST_ULL(dsi_params->div.freq_millihz, MILLI);
+	req->best_parent_rate = req->rate * dsi_params->div.divider_value;
+	dsi_info->req_pll_dsi_rate = req->best_parent_rate;
+
+	return 0;
+}
+
+static int rzv2h_cpg_plldsi_div_set_rate(struct clk_hw *hw,
+					 unsigned long rate,
+					 unsigned long parent_rate)
+{
+	struct rzv2h_plldsi_div_clk *dsi_div = to_plldsi_div_clk(hw);
+	struct pll_clk *pll_clk = to_pll(clk_hw_get_parent(hw));
+	struct rzv2h_cpg_priv *priv = dsi_div->priv;
+	struct rzv2h_pll_div_pars *dsi_params;
+	struct rzv2h_pll_dsi_info *dsi_info;
+	struct ddiv ddiv = dsi_div->ddiv;
+	const struct clk_div_table *clkt;
+	bool divider_found = false;
+	u32 val, shift;
+
+	dsi_info = &priv->pll_dsi_info[pll_clk->pll.instance];
+	dsi_params = &dsi_info->pll_dsi_parameters;
+
+	for (clkt = dsi_div->dtable; clkt->div; clkt++) {
+		if (clkt->div == dsi_params->div.divider_value) {
+			divider_found = true;
+			break;
+		}
+	}
+
+	if (!divider_found)
+		return -EINVAL;
+
+	shift = ddiv.shift;
+	val = readl(priv->base + ddiv.offset) | DDIV_DIVCTL_WEN(shift);
+	val &= ~(clk_div_mask(ddiv.width) << shift);
+	val |= clkt->val << shift;
+	writel(val, priv->base + ddiv.offset);
+
+	return 0;
+}
+
+static const struct clk_ops rzv2h_cpg_plldsi_div_ops = {
+	.recalc_rate = rzv2h_cpg_plldsi_div_recalc_rate,
+	.determine_rate = rzv2h_cpg_plldsi_div_determine_rate,
+	.set_rate = rzv2h_cpg_plldsi_div_set_rate,
+};
+
+static struct clk * __init
+rzv2h_cpg_plldsi_div_clk_register(const struct cpg_core_clk *core,
+				  struct rzv2h_cpg_priv *priv)
+{
+	struct rzv2h_plldsi_div_clk *clk_hw_data;
+	struct clk **clks = priv->clks;
+	struct clk_init_data init;
+	const struct clk *parent;
+	const char *parent_name;
+	struct clk_hw *clk_hw;
+	int ret;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	clk_hw_data = devm_kzalloc(priv->dev, sizeof(*clk_hw_data), GFP_KERNEL);
+	if (!clk_hw_data)
+		return ERR_PTR(-ENOMEM);
+
+	clk_hw_data->priv = priv;
+	clk_hw_data->ddiv = core->cfg.ddiv;
+	clk_hw_data->dtable = core->dtable;
+
+	parent_name = __clk_get_name(parent);
+	init.name = core->name;
+	init.ops = &rzv2h_cpg_plldsi_div_ops;
+	init.flags = core->flag;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk_hw = &clk_hw_data->hw;
+	clk_hw->init = &init;
+
+	ret = devm_clk_hw_register(priv->dev, clk_hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return clk_hw->clk;
+}
+
+static int rzv2h_cpg_plldsi_determine_rate(struct clk_hw *hw,
+					   struct clk_rate_request *req)
+{
+	struct pll_clk *pll_clk = to_pll(hw);
+	struct rzv2h_cpg_priv *priv = pll_clk->priv;
+	struct rzv2h_pll_dsi_info *dsi_info;
+	u64 rate_millihz;
+
+	dsi_info = &priv->pll_dsi_info[pll_clk->pll.instance];
+	/* check if the divider has already invoked the algorithm */
+	if (req->rate == dsi_info->req_pll_dsi_rate)
+		return 0;
+
+	/* If the req->rate doesn't match we do the calculation assuming there is no divider */
+	rate_millihz = mul_u32_u32(req->rate, MILLI);
+	if (!rzv2h_get_pll_pars(dsi_info->pll_dsi_limits,
+				&dsi_info->pll_dsi_parameters.pll, rate_millihz)) {
+		dev_err(priv->dev,
+			"failed to determine rate for req->rate: %lu\n",
+			req->rate);
+		return -EINVAL;
+	}
+
+	req->rate = DIV_ROUND_CLOSEST_ULL(dsi_info->pll_dsi_parameters.pll.freq_millihz, MILLI);
+	dsi_info->req_pll_dsi_rate = req->rate;
+
+	return 0;
+}
+
+static int rzv2h_cpg_pll_set_rate(struct pll_clk *pll_clk,
+				  struct rzv2h_pll_pars *params,
+				  bool ssc_disable)
+{
+	struct rzv2h_cpg_priv *priv = pll_clk->priv;
+	u16 offset = pll_clk->pll.offset;
+	u32 val;
+	int ret;
+
+	/* Put PLL into standby mode */
+	writel(CPG_PLL_STBY_RESETB_WEN, priv->base + CPG_PLL_STBY(offset));
+	ret = readl_poll_timeout_atomic(priv->base + CPG_PLL_MON(offset),
+					val, !(val & CPG_PLL_MON_LOCK),
+					100, 2000);
+	if (ret) {
+		dev_err(priv->dev, "Failed to put PLLDSI into standby mode");
+		return ret;
+	}
+
+	/* Output clock setting 1 */
+	writel(FIELD_PREP(CPG_PLL_CLK1_KDIV, (u16)params->k) |
+	       FIELD_PREP(CPG_PLL_CLK1_MDIV, params->m) |
+	       FIELD_PREP(CPG_PLL_CLK1_PDIV, params->p),
+	       priv->base + CPG_PLL_CLK1(offset));
+
+	/* Output clock setting 2 */
+	val = readl(priv->base + CPG_PLL_CLK2(offset));
+	writel((val & ~CPG_PLL_CLK2_SDIV) | FIELD_PREP(CPG_PLL_CLK2_SDIV, params->s),
+	       priv->base + CPG_PLL_CLK2(offset));
+
+	/* Put PLL to normal mode */
+	if (ssc_disable)
+		val = CPG_PLL_STBY_SSC_EN_WEN;
+	else
+		val = CPG_PLL_STBY_SSC_EN_WEN | CPG_PLL_STBY_SSC_EN;
+	writel(val | CPG_PLL_STBY_RESETB_WEN | CPG_PLL_STBY_RESETB,
+	       priv->base + CPG_PLL_STBY(offset));
+
+	/* PLL normal mode transition, output clock stability check */
+	ret = readl_poll_timeout_atomic(priv->base + CPG_PLL_MON(offset),
+					val, (val & CPG_PLL_MON_LOCK),
+					100, 2000);
+	if (ret) {
+		dev_err(priv->dev, "Failed to put PLLDSI into normal mode");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rzv2h_cpg_plldsi_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct pll_clk *pll_clk = to_pll(hw);
+	struct rzv2h_pll_dsi_info *dsi_info;
+	struct rzv2h_cpg_priv *priv = pll_clk->priv;
+
+	dsi_info = &priv->pll_dsi_info[pll_clk->pll.instance];
+
+	return rzv2h_cpg_pll_set_rate(pll_clk, &dsi_info->pll_dsi_parameters.pll, true);
+}
+
 static int rzv2h_cpg_pll_clk_is_enabled(struct clk_hw *hw)
 {
 	struct pll_clk *pll_clk = to_pll(hw);
@@ -238,6 +719,12 @@ static unsigned long rzv2h_cpg_pll_clk_recalc_rate(struct clk_hw *hw,
 	return DIV_ROUND_CLOSEST_ULL(rate, FIELD_GET(CPG_PLL_CLK1_PDIV, clk1));
 }
 
+static const struct clk_ops rzv2h_cpg_plldsi_ops = {
+	.recalc_rate = rzv2h_cpg_pll_clk_recalc_rate,
+	.determine_rate = rzv2h_cpg_plldsi_determine_rate,
+	.set_rate = rzv2h_cpg_plldsi_set_rate,
+};
+
 static const struct clk_ops rzv2h_cpg_pll_ops = {
 	.is_enabled = rzv2h_cpg_pll_clk_is_enabled,
 	.enable = rzv2h_cpg_pll_clk_enable,
@@ -264,6 +751,10 @@ rzv2h_cpg_pll_clk_register(const struct cpg_core_clk *core,
 	if (!pll_clk)
 		return ERR_PTR(-ENOMEM);
 
+	if (core->type == CLK_TYPE_PLLDSI)
+		priv->pll_dsi_info[core->cfg.pll.instance].pll_dsi_limits =
+			core->cfg.pll.limits;
+
 	parent_name = __clk_get_name(parent);
 	init.name = core->name;
 	init.ops = ops;
@@ -598,6 +1089,12 @@ rzv2h_cpg_register_core_clk(const struct cpg_core_clk *core,
 	case CLK_TYPE_SMUX:
 		clk = rzv2h_cpg_mux_clk_register(core, priv);
 		break;
+	case CLK_TYPE_PLLDSI:
+		clk = rzv2h_cpg_pll_clk_register(core, priv, &rzv2h_cpg_plldsi_ops);
+		break;
+	case CLK_TYPE_PLLDSI_DIV:
+		clk = rzv2h_cpg_plldsi_div_clk_register(core, priv);
+		break;
 	default:
 		goto fail;
 	}
diff --git a/drivers/clk/renesas/rzv2h-cpg.h b/drivers/clk/renesas/rzv2h-cpg.h
index 02920f169bf3..edc712829855 100644
--- a/drivers/clk/renesas/rzv2h-cpg.h
+++ b/drivers/clk/renesas/rzv2h-cpg.h
@@ -22,15 +22,20 @@ struct pll {
 	unsigned int offset:9;
 	unsigned int has_clkn:1;
 	unsigned int instance:2;
+	const struct rzv2h_pll_limits *limits;
 };
 
-#define PLL_PACK(_offset, _has_clkn, _instance) \
+#define PLL_PACK_LIMITS(_offset, _has_clkn, _instance, _limits) \
 	((struct pll){ \
 		.offset = _offset, \
 		.has_clkn = _has_clkn, \
-		.instance = _instance \
+		.instance = _instance, \
+		.limits = _limits \
 	})
 
+#define PLL_PACK(_offset, _has_clkn, _instance) \
+	PLL_PACK_LIMITS(_offset, _has_clkn, _instance, NULL)
+
 #define PLLCA55		PLL_PACK(0x60, 1, 0)
 #define PLLGPU		PLL_PACK(0x120, 1, 0)
 
@@ -191,6 +196,8 @@ enum clk_types {
 	CLK_TYPE_PLL,
 	CLK_TYPE_DDIV,		/* Dynamic Switching Divider */
 	CLK_TYPE_SMUX,		/* Static Mux */
+	CLK_TYPE_PLLDSI,	/* PLLDSI */
+	CLK_TYPE_PLLDSI_DIV,	/* PLLDSI divider */
 };
 
 #define DEF_TYPE(_name, _id, _type...) \
@@ -221,6 +228,14 @@ enum clk_types {
 		 .num_parents = ARRAY_SIZE(_parent_names), \
 		 .flag = CLK_SET_RATE_PARENT, \
 		 .mux_flags = CLK_MUX_HIWORD_MASK)
+#define DEF_PLLDSI(_name, _id, _parent, _pll_packed) \
+	DEF_TYPE(_name, _id, CLK_TYPE_PLLDSI, .parent = _parent, .cfg.pll = _pll_packed)
+#define DEF_PLLDSI_DIV(_name, _id, _parent, _ddiv_packed, _dtable) \
+	DEF_TYPE(_name, _id, CLK_TYPE_PLLDSI_DIV, \
+		 .cfg.ddiv = _ddiv_packed, \
+		 .dtable = _dtable, \
+		 .parent = _parent, \
+		 .flag = CLK_SET_RATE_PARENT)
 
 /**
  * struct rzv2h_mod_clk - Module Clocks definitions
diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
index 0ebbe2f0b45e..69d8159deee3 100644
--- a/include/linux/clk/renesas.h
+++ b/include/linux/clk/renesas.h
@@ -10,7 +10,9 @@
 #ifndef __LINUX_CLK_RENESAS_H_
 #define __LINUX_CLK_RENESAS_H_
 
+#include <linux/clk-provider.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 struct device;
 struct device_node;
@@ -32,4 +34,147 @@ void cpg_mssr_detach_dev(struct generic_pm_domain *unused, struct device *dev);
 #define cpg_mssr_attach_dev	NULL
 #define cpg_mssr_detach_dev	NULL
 #endif
+
+/**
+ * struct rzv2h_pll_limits - PLL parameter constraints
+ *
+ * This structure defines the minimum and maximum allowed values for
+ * various parameters used to configure a PLL. These limits ensure
+ * the PLL operates within valid and stable ranges.
+ *
+ * @fout: Output frequency range (in MHz)
+ * @fout.min: Minimum allowed output frequency
+ * @fout.max: Maximum allowed output frequency
+ *
+ * @fvco: PLL oscillation frequency range (in MHz)
+ * @fvco.min: Minimum allowed VCO frequency
+ * @fvco.max: Maximum allowed VCO frequency
+ *
+ * @m: Main-divider range
+ * @m.min: Minimum main-divider value
+ * @m.max: Maximum main-divider value
+ *
+ * @p: Pre-divider range
+ * @p.min: Minimum pre-divider value
+ * @p.max: Maximum pre-divider value
+ *
+ * @s: Divider range
+ * @s.min: Minimum divider value
+ * @s.max: Maximum divider value
+ *
+ * @k: Delta-sigma modulator range (signed)
+ * @k.min: Minimum delta-sigma value
+ * @k.max: Maximum delta-sigma value
+ */
+struct rzv2h_pll_limits {
+	struct {
+		u32 min;
+		u32 max;
+	} fout;
+
+	struct {
+		u32 min;
+		u32 max;
+	} fvco;
+
+	struct {
+		u16 min;
+		u16 max;
+	} m;
+
+	struct {
+		u8 min;
+		u8 max;
+	} p;
+
+	struct {
+		u8 min;
+		u8 max;
+	} s;
+
+	struct {
+		s16 min;
+		s16 max;
+	} k;
+};
+
+/**
+ * struct rzv2h_pll_pars - PLL configuration parameters
+ *
+ * This structure contains the configuration parameters for the
+ * Phase-Locked Loop (PLL), used to achieve a specific output frequency.
+ *
+ * @m: Main divider value
+ * @p: Pre-divider value
+ * @s: Output divider value
+ * @k: Delta-sigma modulation value
+ * @freq_millihz: Calculated PLL output frequency in millihertz
+ * @error_millihz: Frequency error from target in millihertz (signed)
+ */
+struct rzv2h_pll_pars {
+	u16 m;
+	u8 p;
+	u8 s;
+	s16 k;
+	u64 freq_millihz;
+	s64 error_millihz;
+};
+
+/**
+ * struct rzv2h_pll_div_pars - PLL parameters with post-divider
+ *
+ * This structure is used for PLLs that include an additional post-divider
+ * stage after the main PLL block. It contains both the PLL configuration
+ * parameters and the resulting frequency/error values after the divider.
+ *
+ * @pll: Main PLL configuration parameters (see struct rzv2h_pll_pars)
+ *
+ * @div: Post-divider configuration and result
+ * @div.divider_value: Divider applied to the PLL output
+ * @div.freq_millihz: Output frequency after divider in millihertz
+ * @div.error_millihz: Frequency error from target in millihertz (signed)
+ */
+struct rzv2h_pll_div_pars {
+	struct rzv2h_pll_pars pll;
+	struct {
+		u8 divider_value;
+		u64 freq_millihz;
+		s64 error_millihz;
+	} div;
+};
+
+#define RZV2H_CPG_PLL_DSI_LIMITS(name)					\
+	static const struct rzv2h_pll_limits (name) = {			\
+		.fout = { .min = 25 * MEGA, .max = 375 * MEGA },	\
+		.fvco = { .min = 1600 * MEGA, .max = 3200 * MEGA },	\
+		.m = { .min = 64, .max = 533 },				\
+		.p = { .min = 1, .max = 4 },				\
+		.s = { .min = 0, .max = 6 },				\
+		.k = { .min = -32768, .max = 32767 },			\
+	}								\
+
+#ifdef CONFIG_CLK_RZV2H
+bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
+			struct rzv2h_pll_pars *pars, u64 freq_millihz);
+
+bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+			     struct rzv2h_pll_div_pars *pars,
+			     const u8 *table, u8 table_size, u64 freq_millihz);
+#else
+static inline bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
+				      struct rzv2h_pll_pars *pars,
+				      u64 freq_millihz)
+{
+	return false;
+}
+
+static inline bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+					   struct rzv2h_pll_div_pars *pars,
+					   const u8 *table, u8 table_size,
+					   u64 freq_millihz)
+{
+	return false;
+}
+#endif
+
 #endif
-- 
2.51.0

[PATCH 6.12.y-cip 09/24] clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 66a470abe950fd7ebb0cfd909581fb9573f8b629 upstream.

Add clock and reset entries for the DSI and LCDC peripherals.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251015192611.241920-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/clk/renesas/r9a09g057-cpg.c | 62 +++++++++++++++++++++++++++++
 drivers/clk/renesas/rzv2h-cpg.h     |  3 ++
 2 files changed, 65 insertions(+)

diff --git a/drivers/clk/renesas/r9a09g057-cpg.c b/drivers/clk/renesas/r9a09g057-cpg.c
index 007dbbe08eb3..b85b5302d348 100644
--- a/drivers/clk/renesas/r9a09g057-cpg.c
+++ b/drivers/clk/renesas/r9a09g057-cpg.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/clk-provider.h>
+#include <linux/clk/renesas.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -30,6 +31,7 @@ enum clk_ids {
 	CLK_PLLCA55,
 	CLK_PLLVDO,
 	CLK_PLLETH,
+	CLK_PLLDSI,
 	CLK_PLLGPU,
 
 	/* Internal Core Clocks */
@@ -63,6 +65,9 @@ enum clk_ids {
 	CLK_SMUX2_GBE0_RXCLK,
 	CLK_SMUX2_GBE1_TXCLK,
 	CLK_SMUX2_GBE1_RXCLK,
+	CLK_CDIV4_PLLETH_LPCLK,
+	CLK_PLLETH_LPCLK_GEAR,
+	CLK_PLLDSI_GEAR,
 	CLK_PLLGPU_GEAR,
 
 	/* Module Clocks */
@@ -91,6 +96,26 @@ static const struct clk_div_table dtable_2_16[] = {
 	{0, 0},
 };
 
+static const struct clk_div_table dtable_2_32[] = {
+	{0, 2},
+	{1, 4},
+	{2, 6},
+	{3, 8},
+	{4, 10},
+	{5, 12},
+	{6, 14},
+	{7, 16},
+	{8, 18},
+	{9, 20},
+	{10, 22},
+	{11, 24},
+	{12, 26},
+	{13, 28},
+	{14, 30},
+	{15, 32},
+	{0, 0},
+};
+
 static const struct clk_div_table dtable_2_64[] = {
 	{0, 2},
 	{1, 4},
@@ -107,6 +132,17 @@ static const struct clk_div_table dtable_2_100[] = {
 	{0, 0},
 };
 
+static const struct clk_div_table dtable_16_128[] = {
+	{0, 16},
+	{1, 32},
+	{2, 64},
+	{3, 128},
+	{0, 0},
+};
+
+RZV2H_CPG_PLL_DSI_LIMITS(rzv2h_cpg_pll_dsi_limits);
+#define PLLDSI		PLL_PACK_LIMITS(0xc0, 1, 0, &rzv2h_cpg_pll_dsi_limits)
+
 /* Mux clock tables */
 static const char * const smux2_gbe0_rxclk[] = { ".plleth_gbe0", "et0_rxclk" };
 static const char * const smux2_gbe0_txclk[] = { ".plleth_gbe0", "et0_txclk" };
@@ -128,6 +164,7 @@ static const struct cpg_core_clk r9a09g057_core_clks[] __initconst = {
 	DEF_PLL(".pllca55", CLK_PLLCA55, CLK_QEXTAL, PLLCA55),
 	DEF_FIXED(".pllvdo", CLK_PLLVDO, CLK_QEXTAL, 105, 2),
 	DEF_FIXED(".plleth", CLK_PLLETH, CLK_QEXTAL, 125, 3),
+	DEF_PLLDSI(".plldsi", CLK_PLLDSI, CLK_QEXTAL, PLLDSI),
 	DEF_PLL(".pllgpu", CLK_PLLGPU, CLK_QEXTAL, PLLGPU),
 
 	/* Internal Core Clocks */
@@ -169,6 +206,12 @@ static const struct cpg_core_clk r9a09g057_core_clks[] __initconst = {
 	DEF_SMUX(".smux2_gbe0_rxclk", CLK_SMUX2_GBE0_RXCLK, SSEL0_SELCTL3, smux2_gbe0_rxclk),
 	DEF_SMUX(".smux2_gbe1_txclk", CLK_SMUX2_GBE1_TXCLK, SSEL1_SELCTL0, smux2_gbe1_txclk),
 	DEF_SMUX(".smux2_gbe1_rxclk", CLK_SMUX2_GBE1_RXCLK, SSEL1_SELCTL1, smux2_gbe1_rxclk),
+	DEF_FIXED(".cdiv4_plleth_lpclk", CLK_CDIV4_PLLETH_LPCLK, CLK_PLLETH, 1, 4),
+	DEF_CSDIV(".plleth_lpclk_gear", CLK_PLLETH_LPCLK_GEAR, CLK_CDIV4_PLLETH_LPCLK,
+		  CSDIV0_DIVCTL2, dtable_16_128),
+
+	DEF_PLLDSI_DIV(".plldsi_gear", CLK_PLLDSI_GEAR, CLK_PLLDSI,
+		       CSDIV1_DIVCTL2, dtable_2_32),
 
 	DEF_DDIV(".pllgpu_gear", CLK_PLLGPU_GEAR, CLK_PLLGPU, CDDIV3_DIVCTL1, dtable_2_64),
 
@@ -350,6 +393,22 @@ static const struct rzv2h_mod_clk r9a09g057_mod_clks[] __initconst = {
 						BUS_MSTOP(9, BIT(7))),
 	DEF_MOD("cru_3_pclk",			CLK_PLLDTY_DIV16, 13, 13, 6, 29,
 						BUS_MSTOP(9, BIT(7))),
+	DEF_MOD("dsi_0_pclk",			CLK_PLLDTY_DIV16, 14, 8, 7, 8,
+						BUS_MSTOP(9, BIT(14) | BIT(15))),
+	DEF_MOD("dsi_0_aclk",			CLK_PLLDTY_ACPU_DIV2, 14, 9, 7, 9,
+						BUS_MSTOP(9, BIT(14) | BIT(15))),
+	DEF_MOD("dsi_0_vclk1",			CLK_PLLDSI_GEAR, 14, 10, 7, 10,
+						BUS_MSTOP(9, BIT(14) | BIT(15))),
+	DEF_MOD("dsi_0_lpclk",			CLK_PLLETH_LPCLK_GEAR, 14, 11, 7, 11,
+						BUS_MSTOP(9, BIT(14) | BIT(15))),
+	DEF_MOD("dsi_0_pllref_clk",		CLK_QEXTAL, 14, 12, 7, 12,
+						BUS_MSTOP(9, BIT(14) | BIT(15))),
+	DEF_MOD("lcdc_0_clk_a",			CLK_PLLDTY_ACPU_DIV2, 14, 13, 7, 13,
+						BUS_MSTOP(10, BIT(1) | BIT(2) | BIT(3))),
+	DEF_MOD("lcdc_0_clk_p",			CLK_PLLDTY_DIV16, 14, 14, 7, 14,
+						BUS_MSTOP(10, BIT(1) | BIT(2) | BIT(3))),
+	DEF_MOD("lcdc_0_clk_d",			CLK_PLLDSI_GEAR, 14, 15, 7, 15,
+						BUS_MSTOP(10, BIT(1) | BIT(2) | BIT(3))),
 	DEF_MOD("gpu_0_clk",			CLK_PLLGPU_GEAR, 15, 0, 7, 16,
 						BUS_MSTOP(3, BIT(4))),
 	DEF_MOD("gpu_0_axi_clk",		CLK_PLLDTY_ACPU_DIV2, 15, 1, 7, 17,
@@ -419,6 +478,9 @@ static const struct rzv2h_reset r9a09g057_resets[] __initconst = {
 	DEF_RST(12, 14, 5, 31),		/* CRU_3_PRESETN */
 	DEF_RST(12, 15, 6, 0),		/* CRU_3_ARESETN */
 	DEF_RST(13, 0, 6, 1),		/* CRU_3_S_RESETN */
+	DEF_RST(13, 7, 6, 8),		/* DSI_0_PRESETN */
+	DEF_RST(13, 8, 6, 9),		/* DSI_0_ARESETN */
+	DEF_RST(13, 12, 6, 13),		/* LCDC_0_RESET_N */
 	DEF_RST(13, 13, 6, 14),		/* GPU_0_RESETN */
 	DEF_RST(13, 14, 6, 15),		/* GPU_0_AXI_RESETN */
 	DEF_RST(13, 15, 6, 16),		/* GPU_0_ACE_RESETN */
diff --git a/drivers/clk/renesas/rzv2h-cpg.h b/drivers/clk/renesas/rzv2h-cpg.h
index edc712829855..1f4f1b3dc0a7 100644
--- a/drivers/clk/renesas/rzv2h-cpg.h
+++ b/drivers/clk/renesas/rzv2h-cpg.h
@@ -126,6 +126,7 @@ struct fixed_mod_conf {
 #define CPG_CDDIV3		(0x40C)
 #define CPG_CDDIV4		(0x410)
 #define CPG_CSDIV0		(0x500)
+#define CPG_CSDIV1		(0x504)
 
 #define CDDIV0_DIVCTL1	DDIV_PACK(CPG_CDDIV0, 4, 3, 1)
 #define CDDIV0_DIVCTL2	DDIV_PACK(CPG_CDDIV0, 8, 3, 2)
@@ -142,7 +143,9 @@ struct fixed_mod_conf {
 
 #define CSDIV0_DIVCTL0	DDIV_PACK(CPG_CSDIV0, 0, 2, CSDIV_NO_MON)
 #define CSDIV0_DIVCTL1	DDIV_PACK(CPG_CSDIV0, 4, 2, CSDIV_NO_MON)
+#define CSDIV0_DIVCTL2	DDIV_PACK(CPG_CSDIV0, 8, 2, CSDIV_NO_MON)
 #define CSDIV0_DIVCTL3	DDIV_PACK_NO_RMW(CPG_CSDIV0, 12, 2, CSDIV_NO_MON)
+#define CSDIV1_DIVCTL2	DDIV_PACK(CPG_CSDIV1, 8, 4, CSDIV_NO_MON)
 
 #define SSEL0_SELCTL2	SMUX_PACK(CPG_SSEL0, 8, 1)
 #define SSEL0_SELCTL3	SMUX_PACK(CPG_SSEL0, 12, 1)
-- 
2.51.0

[PATCH 6.12.y-cip 10/24] drm: renesas: rz-du: mipi_dsi: Simplify HSFREQ calculation

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 0425a20f8a49722d0508e917b4aef767bbc06ec8 upstream.

Simplify the high-speed clock frequency (HSFREQ) calculation by removing
the redundant multiplication and division by 8. The updated equation:

    hsfreq = mode->clock * bpp / dsi->lanes;

produces the same result while improving readability and clarity.

Additionally, update the comment to clarify the relationship between HS
clock bit frequency, HS byte clock frequency, and HSFREQ.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 1729245f4adc..78358eb85932 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -277,10 +277,10 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	 *       hsclk: DSI HS Byte clock frequency (Hz)
 	 *       lanes: number of data lanes
 	 *
-	 * hsclk(bit) = hsclk(byte) * 8
+	 * hsclk(bit) = hsclk(byte) * 8 = hsfreq
 	 */
 	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-	hsfreq = (mode->clock * bpp * 8) / (8 * dsi->lanes);
+	hsfreq = mode->clock * bpp / dsi->lanes;
 
 	ret = pm_runtime_resume_and_get(dsi->dev);
 	if (ret < 0)
-- 
2.51.0

[PATCH 6.12.y-cip 11/24] drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculation

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 3c55c4f05c7ac4fd741cbe92574598324f843d94 upstream.

Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual
VCLK rate instead of the mode clock. The relationship between HSCLK and
VCLK is:

    vclk * bpp <= hsclk * 8 * lanes

Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that
HSFREQ accurately reflects the clock rate set in hardware, leading to
better precision in data transmission.

Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division
when computing `hsfreq`. Also, update unit conversions to use correct
scaling factors for better clarity and correctness.

Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ
threshold comparisons to use Hz instead of kHz to ensure correct behavior.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 40 +++++++++++--------
 1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 78358eb85932..19219f2489c6 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -8,6 +8,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/math.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_graph.h>
@@ -15,6 +16,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
+#include <linux/units.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -75,7 +77,7 @@ struct rzg2l_mipi_dsi_timings {
 
 static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 	{
-		.hsfreq_max = 80000,
+		.hsfreq_max = 80000000,
 		.t_init = 79801,
 		.tclk_prepare = 8,
 		.ths_prepare = 13,
@@ -89,7 +91,7 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 		.tlpx = 6,
 	},
 	{
-		.hsfreq_max = 125000,
+		.hsfreq_max = 125000000,
 		.t_init = 79801,
 		.tclk_prepare = 8,
 		.ths_prepare = 12,
@@ -103,7 +105,7 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 		.tlpx = 6,
 	},
 	{
-		.hsfreq_max = 250000,
+		.hsfreq_max = 250000000,
 		.t_init = 79801,
 		.tclk_prepare = 8,
 		.ths_prepare = 12,
@@ -117,7 +119,7 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 		.tlpx = 6,
 	},
 	{
-		.hsfreq_max = 360000,
+		.hsfreq_max = 360000000,
 		.t_init = 79801,
 		.tclk_prepare = 8,
 		.ths_prepare = 10,
@@ -131,7 +133,7 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 		.tlpx = 6,
 	},
 	{
-		.hsfreq_max = 720000,
+		.hsfreq_max = 720000000,
 		.t_init = 79801,
 		.tclk_prepare = 8,
 		.ths_prepare = 9,
@@ -145,7 +147,7 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 		.tlpx = 6,
 	},
 	{
-		.hsfreq_max = 1500000,
+		.hsfreq_max = 1500000000,
 		.t_init = 79801,
 		.tclk_prepare = 8,
 		.ths_prepare = 9,
@@ -258,7 +260,7 @@ static void rzg2l_mipi_dsi_dphy_exit(struct rzg2l_mipi_dsi *dsi)
 static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 				  const struct drm_display_mode *mode)
 {
-	unsigned long hsfreq;
+	unsigned long hsfreq, vclk_rate;
 	unsigned int bpp;
 	u32 txsetr;
 	u32 clstptsetr;
@@ -269,6 +271,16 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	u32 golpbkt;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(dsi->dev);
+	if (ret < 0)
+		return ret;
+
+	clk_set_rate(dsi->vclk, mode->clock * KILO);
+	vclk_rate = clk_get_rate(dsi->vclk);
+	if (vclk_rate != mode->clock * KILO)
+		dev_dbg(dsi->dev, "Requested vclk rate %lu, actual %lu mismatch\n",
+			mode->clock * KILO, vclk_rate);
+
 	/*
 	 * Relationship between hsclk and vclk must follow
 	 * vclk * bpp = hsclk * 8 * lanes
@@ -280,13 +292,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	 * hsclk(bit) = hsclk(byte) * 8 = hsfreq
 	 */
 	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-	hsfreq = mode->clock * bpp / dsi->lanes;
-
-	ret = pm_runtime_resume_and_get(dsi->dev);
-	if (ret < 0)
-		return ret;
-
-	clk_set_rate(dsi->vclk, mode->clock * 1000);
+	hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
 
 	ret = rzg2l_mipi_dsi_dphy_init(dsi, hsfreq);
 	if (ret < 0)
@@ -304,12 +310,12 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	 * - data lanes: maximum 4 lanes
 	 * Therefore maximum hsclk will be 891 Mbps.
 	 */
-	if (hsfreq > 445500) {
+	if (hsfreq > 445500000) {
 		clkkpt = 12;
 		clkbfht = 15;
 		clkstpt = 48;
 		golpbkt = 75;
-	} else if (hsfreq > 250000) {
+	} else if (hsfreq > 250000000) {
 		clkkpt = 7;
 		clkbfht = 8;
 		clkstpt = 27;
@@ -754,7 +760,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	 * mode->clock and format are not available. So initialize DPHY with
 	 * timing parameters for 80Mbps.
 	 */
-	ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000);
+	ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000000);
 	if (ret < 0)
 		goto err_phy;
 
-- 
2.51.0

[PATCH 6.12.y-cip 12/24] drm: renesas: rz-du: mipi_dsi: Add OF data support

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 2991c3f0ca8632264569f7c045f37ecdb71a05da upstream.

n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch
introduces a mechanism to pass SoC-specific information via OF data in the
DSI driver. This enables the driver to adapt dynamically to various
SoC-specific requirements without hardcoding configurations.

The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one
on the RZ/G2L SoC. While the LINK registers are shared between the two
SoCs, the D-PHY registers differ. Also the VCLK range differs on both these
SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is
introduced and as now passed as OF data.

These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by
allowing SoC-specific data to be passed through OF.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 51 ++++++++++++++-----
 .../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h   |  2 -
 2 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 19219f2489c6..957f108ea708 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -28,10 +28,23 @@
 
 #include "rzg2l_mipi_dsi_regs.h"
 
+struct rzg2l_mipi_dsi;
+
+struct rzg2l_mipi_dsi_hw_info {
+	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, unsigned long hsfreq);
+	void (*dphy_exit)(struct rzg2l_mipi_dsi *dsi);
+	u32 phy_reg_offset;
+	u32 link_reg_offset;
+	unsigned long min_dclk;
+	unsigned long max_dclk;
+};
+
 struct rzg2l_mipi_dsi {
 	struct device *dev;
 	void __iomem *mmio;
 
+	const struct rzg2l_mipi_dsi_hw_info *info;
+
 	struct reset_control *rstc;
 	struct reset_control *arstc;
 	struct reset_control *prstc;
@@ -164,22 +177,22 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 
 static void rzg2l_mipi_dsi_phy_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
 {
-	iowrite32(data, dsi->mmio + reg);
+	iowrite32(data, dsi->mmio + dsi->info->phy_reg_offset + reg);
 }
 
 static void rzg2l_mipi_dsi_link_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
 {
-	iowrite32(data, dsi->mmio + LINK_REG_OFFSET + reg);
+	iowrite32(data, dsi->mmio + dsi->info->link_reg_offset + reg);
 }
 
 static u32 rzg2l_mipi_dsi_phy_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
 {
-	return ioread32(dsi->mmio + reg);
+	return ioread32(dsi->mmio + dsi->info->phy_reg_offset + reg);
 }
 
 static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
 {
-	return ioread32(dsi->mmio + LINK_REG_OFFSET + reg);
+	return ioread32(dsi->mmio + dsi->info->link_reg_offset + reg);
 }
 
 /* -----------------------------------------------------------------------------
@@ -294,7 +307,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
 	hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
 
-	ret = rzg2l_mipi_dsi_dphy_init(dsi, hsfreq);
+	ret = dsi->info->dphy_init(dsi, hsfreq);
 	if (ret < 0)
 		goto err_phy;
 
@@ -337,7 +350,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	return 0;
 
 err_phy:
-	rzg2l_mipi_dsi_dphy_exit(dsi);
+	dsi->info->dphy_exit(dsi);
 	pm_runtime_put(dsi->dev);
 
 	return ret;
@@ -345,7 +358,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 
 static void rzg2l_mipi_dsi_stop(struct rzg2l_mipi_dsi *dsi)
 {
-	rzg2l_mipi_dsi_dphy_exit(dsi);
+	dsi->info->dphy_exit(dsi);
 	pm_runtime_put(dsi->dev);
 }
 
@@ -588,10 +601,12 @@ rzg2l_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge,
 				 const struct drm_display_info *info,
 				 const struct drm_display_mode *mode)
 {
-	if (mode->clock > 148500)
+	struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge);
+
+	if (mode->clock > dsi->info->max_dclk)
 		return MODE_CLOCK_HIGH;
 
-	if (mode->clock < 5803)
+	if (mode->clock < dsi->info->min_dclk)
 		return MODE_CLOCK_LOW;
 
 	return MODE_OK;
@@ -717,6 +732,8 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dsi);
 	dsi->dev = &pdev->dev;
 
+	dsi->info = of_device_get_match_data(&pdev->dev);
+
 	ret = drm_of_get_data_lanes_count_ep(dsi->dev->of_node, 1, 0, 1, 4);
 	if (ret < 0)
 		return dev_err_probe(dsi->dev, ret,
@@ -760,13 +777,13 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	 * mode->clock and format are not available. So initialize DPHY with
 	 * timing parameters for 80Mbps.
 	 */
-	ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000000);
+	ret = dsi->info->dphy_init(dsi, 80000000);
 	if (ret < 0)
 		goto err_phy;
 
 	txsetr = rzg2l_mipi_dsi_link_read(dsi, TXSETR);
 	dsi->num_data_lanes = min(((txsetr >> 16) & 3) + 1, num_data_lanes);
-	rzg2l_mipi_dsi_dphy_exit(dsi);
+	dsi->info->dphy_exit(dsi);
 	pm_runtime_put(dsi->dev);
 
 	/* Initialize the DRM bridge. */
@@ -783,7 +800,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	return 0;
 
 err_phy:
-	rzg2l_mipi_dsi_dphy_exit(dsi);
+	dsi->info->dphy_exit(dsi);
 	pm_runtime_put(dsi->dev);
 err_pm_disable:
 	pm_runtime_disable(dsi->dev);
@@ -798,8 +815,16 @@ static void rzg2l_mipi_dsi_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 }
 
+static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
+	.dphy_init = rzg2l_mipi_dsi_dphy_init,
+	.dphy_exit = rzg2l_mipi_dsi_dphy_exit,
+	.link_reg_offset = 0x10000,
+	.min_dclk = 5803,
+	.max_dclk = 148500,
+};
+
 static const struct of_device_id rzg2l_mipi_dsi_of_table[] = {
-	{ .compatible = "renesas,rzg2l-mipi-dsi" },
+	{ .compatible = "renesas,rzg2l-mipi-dsi", .data = &rzg2l_mipi_dsi_info, },
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
index 1dbc16ec64a4..16efe4dc59f4 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
@@ -41,8 +41,6 @@
 #define DSIDPHYTIM3_THS_ZERO(x)		((x) << 0)
 
 /* --------------------------------------------------------*/
-/* Link Registers */
-#define LINK_REG_OFFSET			0x10000
 
 /* Link Status Register */
 #define LINKSR				0x10
-- 
2.51.0

[PATCH 6.12.y-cip 13/24] drm: renesas: rz-du: mipi_dsi: Make "rst" reset control optional for RZ/V2H(P)

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit e96bec001af60857ece60b5fd10caa9886bbf12d upstream.

In preparation for adding support for the Renesas RZ/V2H(P) SoC, make the
"rst" reset control optional in the MIPI DSI driver. The RZ/V2H(P) SoC
does not provide this reset line, and attempting to acquire it using the
mandatory API causes probe failure.

Switching to devm_reset_control_get_optional_exclusive() ensures
compatibility with both SoCs that provide this reset line and those that
do not, such as RZ/V2H(P).

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 957f108ea708..f0a4d18d5f4d 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -749,7 +749,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	if (IS_ERR(dsi->vclk))
 		return PTR_ERR(dsi->vclk);
 
-	dsi->rstc = devm_reset_control_get_exclusive(dsi->dev, "rst");
+	dsi->rstc = devm_reset_control_get_optional_exclusive(dsi->dev, "rst");
 	if (IS_ERR(dsi->rstc))
 		return dev_err_probe(dsi->dev, PTR_ERR(dsi->rstc),
 				     "failed to get rst\n");
-- 
2.51.0

[PATCH 6.12.y-cip 14/24] drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency calculations

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 7c3fecdd12d6487e1229f00bfeffccabd1f011f8 upstream.

Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve
precision, especially for the RZ/V2H(P) SoC, where PLL dividers require
high accuracy.

These changes prepare the driver for upcoming RZ/V2H(P) SoC support.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index f0a4d18d5f4d..7d5515d676c7 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -31,7 +31,7 @@
 struct rzg2l_mipi_dsi;
 
 struct rzg2l_mipi_dsi_hw_info {
-	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, unsigned long hsfreq);
+	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, u64 hsfreq_millihz);
 	void (*dphy_exit)(struct rzg2l_mipi_dsi *dsi);
 	u32 phy_reg_offset;
 	u32 link_reg_offset;
@@ -200,8 +200,9 @@ static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
  */
 
 static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
-				    unsigned long hsfreq)
+				    u64 hsfreq_millihz)
 {
+	unsigned long hsfreq = DIV_ROUND_CLOSEST_ULL(hsfreq_millihz, MILLI);
 	const struct rzg2l_mipi_dsi_timings *dphy_timings;
 	unsigned int i;
 	u32 dphyctrl0;
@@ -274,6 +275,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 				  const struct drm_display_mode *mode)
 {
 	unsigned long hsfreq, vclk_rate;
+	u64 hsfreq_millihz;
 	unsigned int bpp;
 	u32 txsetr;
 	u32 clstptsetr;
@@ -305,9 +307,9 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	 * hsclk(bit) = hsclk(byte) * 8 = hsfreq
 	 */
 	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-	hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
+	hsfreq_millihz = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(vclk_rate, bpp * MILLI), dsi->lanes);
 
-	ret = dsi->info->dphy_init(dsi, hsfreq);
+	ret = dsi->info->dphy_init(dsi, hsfreq_millihz);
 	if (ret < 0)
 		goto err_phy;
 
@@ -315,6 +317,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN;
 	rzg2l_mipi_dsi_link_write(dsi, TXSETR, txsetr);
 
+	hsfreq = DIV_ROUND_CLOSEST_ULL(hsfreq_millihz, MILLI);
 	/*
 	 * Global timings characteristic depends on high speed Clock Frequency
 	 * Currently MIPI DSI-IF just supports maximum FHD@60 with:
@@ -777,7 +780,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	 * mode->clock and format are not available. So initialize DPHY with
 	 * timing parameters for 80Mbps.
 	 */
-	ret = dsi->info->dphy_init(dsi, 80000000);
+	ret = dsi->info->dphy_init(dsi, 80000000ULL * MILLI);
 	if (ret < 0)
 		goto err_phy;
 
-- 
2.51.0

[PATCH 6.12.y-cip 15/24] drm: renesas: rz-du: mipi_dsi: Add feature flag for 16BPP support

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit a56a6b81d80fdf876a5ee6e441a6c8a0052f6f37 upstream.

Introduce the `RZ_MIPI_DSI_FEATURE_16BPP` flag in `rzg2l_mipi_dsi_hw_info`
to indicate support for 16BPP pixel formats. The RZ/V2H(P) SoC supports
16BPP, whereas this feature is missing on the RZ/G2L SoC.

Update the `mipi_dsi_host_attach()` function to check this flag before
allowing 16BPP formats. If the SoC does not support 16BPP, return an error
to prevent incorrect format selection.

This change enables finer-grained format support control for different
SoC variants.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 7d5515d676c7..6278b8f79f4a 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -28,6 +28,8 @@
 
 #include "rzg2l_mipi_dsi_regs.h"
 
+#define RZ_MIPI_DSI_FEATURE_16BPP	BIT(0)
+
 struct rzg2l_mipi_dsi;
 
 struct rzg2l_mipi_dsi_hw_info {
@@ -37,6 +39,7 @@ struct rzg2l_mipi_dsi_hw_info {
 	u32 link_reg_offset;
 	unsigned long min_dclk;
 	unsigned long max_dclk;
+	u8 features;
 };
 
 struct rzg2l_mipi_dsi {
@@ -644,8 +647,16 @@ static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host,
 
 	switch (mipi_dsi_pixel_format_to_bpp(device->format)) {
 	case 24:
+		break;
 	case 18:
 		break;
+	case 16:
+		if (!(dsi->info->features & RZ_MIPI_DSI_FEATURE_16BPP)) {
+			dev_err(dsi->dev, "Unsupported format 0x%04x\n",
+				device->format);
+			return -EINVAL;
+		}
+		break;
 	default:
 		dev_err(dsi->dev, "Unsupported format 0x%04x\n", device->format);
 		return -EINVAL;
-- 
2.51.0

[PATCH 6.12.y-cip 16/24] drm: renesas: rz-du: mipi_dsi: Add dphy_late_init() callback for RZ/V2H(P)

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 7c1e102ccf1d276bbaee2ddb601b0bdeb6eeaf5c upstream.

Introduce the `dphy_late_init` callback in `rzg2l_mipi_dsi_hw_info` to
allow additional D-PHY register configurations after enabling data and
clock lanes. This is required for the RZ/V2H(P) SoC but not for the
RZ/G2L SoC.

Modify `rzg2l_mipi_dsi_startup()` to invoke `dphy_late_init` if defined,
ensuring SoC-specific initialization is performed only when necessary.

This change prepares for RZ/V2H(P) SoC support while maintaining
compatibility with existing platforms.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 6278b8f79f4a..044eb085b960 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -34,6 +34,7 @@ struct rzg2l_mipi_dsi;
 
 struct rzg2l_mipi_dsi_hw_info {
 	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, u64 hsfreq_millihz);
+	void (*dphy_startup_late_init)(struct rzg2l_mipi_dsi *dsi);
 	void (*dphy_exit)(struct rzg2l_mipi_dsi *dsi);
 	u32 phy_reg_offset;
 	u32 link_reg_offset;
@@ -320,6 +321,9 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN;
 	rzg2l_mipi_dsi_link_write(dsi, TXSETR, txsetr);
 
+	if (dsi->info->dphy_startup_late_init)
+		dsi->info->dphy_startup_late_init(dsi);
+
 	hsfreq = DIV_ROUND_CLOSEST_ULL(hsfreq_millihz, MILLI);
 	/*
 	 * Global timings characteristic depends on high speed Clock Frequency
-- 
2.51.0

[PATCH 6.12.y-cip 17/24] drm: renesas: rz-du: mipi_dsi: Add function pointers for configuring VCLK and mode validation

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit e2944dc6587f39c3eefb15ee607e700314230a0b upstream.

Introduce `dphy_conf_clks` and `dphy_mode_clk_check` callbacks in
`rzg2l_mipi_dsi_hw_info` to configure the VCLK and validate
supported display modes.

On the RZ/V2H(P) SoC, the DSI PLL dividers need to be as accurate as
possible. To ensure compatibility with both RZ/G2L and RZ/V2H(P) SoCs,
function pointers are introduced.

Modify `rzg2l_mipi_dsi_startup()` to use `dphy_conf_clks` for clock
configuration and `rzg2l_mipi_dsi_bridge_mode_valid()` to invoke
`dphy_mode_clk_check` for mode validation.

This change ensures proper operation across different SoC variants
by allowing fine-grained control over clock configuration and mode
validation.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 65 +++++++++++++------
 1 file changed, 45 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 044eb085b960..9355df091b72 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -36,6 +36,10 @@ struct rzg2l_mipi_dsi_hw_info {
 	int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, u64 hsfreq_millihz);
 	void (*dphy_startup_late_init)(struct rzg2l_mipi_dsi *dsi);
 	void (*dphy_exit)(struct rzg2l_mipi_dsi *dsi);
+	int (*dphy_conf_clks)(struct rzg2l_mipi_dsi *dsi, unsigned long mode_freq,
+			      u64 *hsfreq_millihz);
+	unsigned int (*dphy_mode_clk_check)(struct rzg2l_mipi_dsi *dsi,
+					    unsigned long mode_freq);
 	u32 phy_reg_offset;
 	u32 link_reg_offset;
 	unsigned long min_dclk;
@@ -275,12 +279,39 @@ static void rzg2l_mipi_dsi_dphy_exit(struct rzg2l_mipi_dsi *dsi)
 	reset_control_assert(dsi->rstc);
 }
 
+static int rzg2l_dphy_conf_clks(struct rzg2l_mipi_dsi *dsi, unsigned long mode_freq,
+				u64 *hsfreq_millihz)
+{
+	unsigned long vclk_rate;
+	unsigned int bpp;
+
+	clk_set_rate(dsi->vclk, mode_freq * KILO);
+	vclk_rate = clk_get_rate(dsi->vclk);
+	if (vclk_rate != mode_freq * KILO)
+		dev_dbg(dsi->dev, "Requested vclk rate %lu, actual %lu mismatch\n",
+			mode_freq * KILO, vclk_rate);
+	/*
+	 * Relationship between hsclk and vclk must follow
+	 * vclk * bpp = hsclk * 8 * lanes
+	 * where vclk: video clock (Hz)
+	 *       bpp: video pixel bit depth
+	 *       hsclk: DSI HS Byte clock frequency (Hz)
+	 *       lanes: number of data lanes
+	 *
+	 * hsclk(bit) = hsclk(byte) * 8 = hsfreq
+	 */
+	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+	*hsfreq_millihz = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(vclk_rate, bpp * MILLI),
+						dsi->lanes);
+
+	return 0;
+}
+
 static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 				  const struct drm_display_mode *mode)
 {
-	unsigned long hsfreq, vclk_rate;
+	unsigned long hsfreq;
 	u64 hsfreq_millihz;
-	unsigned int bpp;
 	u32 txsetr;
 	u32 clstptsetr;
 	u32 lptrnstsetr;
@@ -294,24 +325,9 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 	if (ret < 0)
 		return ret;
 
-	clk_set_rate(dsi->vclk, mode->clock * KILO);
-	vclk_rate = clk_get_rate(dsi->vclk);
-	if (vclk_rate != mode->clock * KILO)
-		dev_dbg(dsi->dev, "Requested vclk rate %lu, actual %lu mismatch\n",
-			mode->clock * KILO, vclk_rate);
-
-	/*
-	 * Relationship between hsclk and vclk must follow
-	 * vclk * bpp = hsclk * 8 * lanes
-	 * where vclk: video clock (Hz)
-	 *       bpp: video pixel bit depth
-	 *       hsclk: DSI HS Byte clock frequency (Hz)
-	 *       lanes: number of data lanes
-	 *
-	 * hsclk(bit) = hsclk(byte) * 8 = hsfreq
-	 */
-	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-	hsfreq_millihz = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(vclk_rate, bpp * MILLI), dsi->lanes);
+	ret = dsi->info->dphy_conf_clks(dsi, mode->clock, &hsfreq_millihz);
+	if (ret < 0)
+		goto err_phy;
 
 	ret = dsi->info->dphy_init(dsi, hsfreq_millihz);
 	if (ret < 0)
@@ -619,6 +635,14 @@ rzg2l_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge,
 	if (mode->clock < dsi->info->min_dclk)
 		return MODE_CLOCK_LOW;
 
+	if (dsi->info->dphy_mode_clk_check) {
+		enum drm_mode_status status;
+
+		status = dsi->info->dphy_mode_clk_check(dsi, mode->clock);
+		if (status != MODE_OK)
+			return status;
+	}
+
 	return MODE_OK;
 }
 
@@ -836,6 +860,7 @@ static void rzg2l_mipi_dsi_remove(struct platform_device *pdev)
 static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
 	.dphy_init = rzg2l_mipi_dsi_dphy_init,
 	.dphy_exit = rzg2l_mipi_dsi_dphy_exit,
+	.dphy_conf_clks = rzg2l_dphy_conf_clks,
 	.link_reg_offset = 0x10000,
 	.min_dclk = 5803,
 	.max_dclk = 148500,
-- 
2.51.0

[PATCH 6.12.y-cip 18/24] drm: renesas: rz-du: mipi_dsi: Add LPCLK clock support

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 99b98993ae010b86d0ec0d779c1c8be890057568 upstream.

Add LPCLK clock handling to the RZ/G2L MIPI DSI driver to support proper
DSI timing parameter configuration on RZ/V2H SoCs. While lpclk is present
on both RZ/G2L and RZ/V2H SoCs, the RZ/V2H SoC specifically uses the lpclk
rate to configure the DSI timing parameter ULPSEXIT.

Introduce a new lpclk field in the rzg2l_mipi_dsi structure and acquire
the "lpclk" clock during probe to enable lpclk rate-based timing
calculations on RZ/V2H while maintaining compatibility with RZ/G2L.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 9355df091b72..7d7ba72e0733 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -62,6 +62,7 @@ struct rzg2l_mipi_dsi {
 	struct drm_bridge *next_bridge;
 
 	struct clk *vclk;
+	struct clk *lpclk;
 
 	enum mipi_dsi_pixel_format format;
 	unsigned int num_data_lanes;
@@ -791,6 +792,10 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
 	if (IS_ERR(dsi->vclk))
 		return PTR_ERR(dsi->vclk);
 
+	dsi->lpclk = devm_clk_get(dsi->dev, "lpclk");
+	if (IS_ERR(dsi->lpclk))
+		return PTR_ERR(dsi->lpclk);
+
 	dsi->rstc = devm_reset_control_get_optional_exclusive(dsi->dev, "rst");
 	if (IS_ERR(dsi->rstc))
 		return dev_err_probe(dsi->dev, PTR_ERR(dsi->rstc),
-- 
2.51.0

[PATCH 6.12.y-cip 19/24] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 20de1b0080b9889094d703927871da8f21fb624e upstream.

Add MIPI DSI support for the Renesas RZ/V2H(P) SoC. Compared to the
RZ/G2L family, the RZ/V2H(P) requires dedicated D-PHY PLL programming,
different clock configuration, and additional timing parameter handling.
The driver introduces lookup tables and helpers for D-PHY timings
(TCLK*, THS*, TLPX, and ULPS exit) as specified in the RZ/V2H(P) hardware
manual. ULPS exit timing depends on the LPCLK rate and is now handled
explicitly.

The implementation also adds support for 16 bpp RGB format, updates the
clock setup path to use the RZ/V2H PLL divider limits, and provides new
.dphy_init, .dphy_conf_clks, and .dphy_startup_late_init callbacks to
match the RZ/V2H sequence.

With these changes, the RZ/V2H(P) can operate the MIPI DSI interface in
compliance with its hardware specification while retaining support for
existing RZ/G2L platforms.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-8-prabhakar.mahadev-lad.rj@bp.renesas.com
[OP: dropped double quotes from MODULE_IMPORT_NS() parameter]
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 448 ++++++++++++++++++
 .../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h   |  34 ++
 2 files changed, 482 insertions(+)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 7d7ba72e0733..c975b19d10ec 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2022 Renesas Electronics Corporation
  */
 #include <linux/clk.h>
+#include <linux/clk/renesas.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -28,6 +29,8 @@
 
 #include "rzg2l_mipi_dsi_regs.h"
 
+MODULE_IMPORT_NS(RZV2H_CPG);
+
 #define RZ_MIPI_DSI_FEATURE_16BPP	BIT(0)
 
 struct rzg2l_mipi_dsi;
@@ -40,6 +43,11 @@ struct rzg2l_mipi_dsi_hw_info {
 			      u64 *hsfreq_millihz);
 	unsigned int (*dphy_mode_clk_check)(struct rzg2l_mipi_dsi *dsi,
 					    unsigned long mode_freq);
+	struct {
+		const struct rzv2h_pll_limits **limits;
+		const u8 *table;
+		const u8 table_size;
+	} cpg_plldsi;
 	u32 phy_reg_offset;
 	u32 link_reg_offset;
 	unsigned long min_dclk;
@@ -47,6 +55,11 @@ struct rzg2l_mipi_dsi_hw_info {
 	u8 features;
 };
 
+struct rzv2h_dsi_mode_calc {
+	unsigned long mode_freq_khz;
+	struct rzv2h_pll_pars dsi_parameters;
+};
+
 struct rzg2l_mipi_dsi {
 	struct device *dev;
 	void __iomem *mmio;
@@ -68,6 +81,17 @@ struct rzg2l_mipi_dsi {
 	unsigned int num_data_lanes;
 	unsigned int lanes;
 	unsigned long mode_flags;
+
+	struct rzv2h_dsi_mode_calc mode_calc;
+};
+
+static const struct rzv2h_pll_limits rzv2h_plldsi_div_limits = {
+	.fout = { .min = 80 * MEGA, .max = 1500 * MEGA },
+	.fvco = { .min = 1050 * MEGA, .max = 2100 * MEGA },
+	.m = { .min = 64, .max = 1023 },
+	.p = { .min = 1, .max = 4 },
+	.s = { .min = 0, .max = 5 },
+	.k = { .min = -32768, .max = 32767 },
 };
 
 static inline struct rzg2l_mipi_dsi *
@@ -184,6 +208,237 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
 	},
 };
 
+/**
+ * struct rzv2h_mipi_dsi_timings - Timing parameter table structure
+ *
+ * @hsfreq: Pointer to frequency threshold array
+ * @len: Number of entries in the hsfreq array
+ * @base_value: Base register value offset for this timing parameter
+ *
+ * Each timing parameter (TCLK*, THS*, etc.) has its own table with
+ * frequency thresholds and corresponding base register values.
+ */
+struct rzv2h_mipi_dsi_timings {
+	const u8 *hsfreq;
+	u8 len;
+	u8 base_value;
+};
+
+/*
+ * enum rzv2h_dsi_timing_idx - MIPI DSI timing parameter indices
+ *
+ * These enums correspond to different MIPI DSI PHY timing parameters.
+ */
+enum rzv2h_dsi_timing_idx {
+	TCLKPRPRCTL,
+	TCLKZEROCTL,
+	TCLKPOSTCTL,
+	TCLKTRAILCTL,
+	THSPRPRCTL,
+	THSZEROCTL,
+	THSTRAILCTL,
+	TLPXCTL,
+	THSEXITCTL,
+};
+
+/*
+ * RZ/V2H(P) Frequency threshold lookup tables for D-PHY timing parameters
+ *
+ * - Each array contains frequency thresholds (in units of 10 Mbps),
+ *   taken directly from the table 9.5-4 hardware manual.
+ * - These thresholds define the frequency ranges for which timing
+ *   register values must be programmed.
+ * - The actual register value is calculated in
+ *   rzv2h_dphy_find_timings_val():
+ *
+ *       register_value = timings->base_value + table_index
+ *
+ * Example (TCLKPRPRCTL, from HW manual):
+ *   0-150 Mbps   -> index 0 -> register_value = base + 0 = 0 + 0 = 0
+ *   151-260 Mbps -> index 1 -> register_value = base + 1 = 0 + 1 = 1
+ *   261-370 Mbps -> index 2 -> register_value = base + 2 = 0 + 2 = 2
+ *
+ * Each of the following arrays corresponds to a specific timing
+ * parameter (TCLKPRPRCTL, TCLKZEROCTL, TCLKPOSTCTL, etc.).
+ */
+static const u8 tclkprprctl[] = {
+	15, 26, 37, 47, 58, 69, 79, 90, 101, 111, 122, 133, 143, 150,
+};
+
+static const u8 tclkzeroctl[] = {
+	9, 11, 13, 15, 18, 21, 23, 24, 25, 27, 29, 31, 34, 36, 38,
+	41, 43, 45, 47, 50, 52, 54, 57, 59, 61, 63, 66, 68, 70, 73,
+	75, 77, 79, 82, 84, 86, 89, 91, 93, 95, 98, 100, 102, 105,
+	107, 109, 111, 114, 116, 118, 121, 123, 125, 127, 130, 132,
+	134, 137, 139, 141, 143, 146, 148, 150,
+};
+
+static const u8 tclkpostctl[] = {
+	8, 21, 34, 48, 61, 74, 88, 101, 114, 128, 141, 150,
+};
+
+static const u8 tclktrailctl[] = {
+	14, 25, 37, 48, 59, 71, 82, 94, 105, 117, 128, 139, 150,
+};
+
+static const u8 thsprprctl[] = {
+	11, 19, 29, 40, 50, 61, 72, 82, 93, 103, 114, 125, 135, 146, 150,
+};
+
+static const u8 thszeroctl[] = {
+	18, 24, 29, 35, 40, 46, 51, 57, 62, 68, 73, 79, 84, 90,
+	95, 101, 106, 112, 117, 123, 128, 134, 139, 145, 150,
+};
+
+static const u8 thstrailctl[] = {
+	10, 21, 32, 42, 53, 64, 75, 85, 96, 107, 118, 128, 139, 150,
+};
+
+static const u8 tlpxctl[] = {
+	13, 26, 39, 53, 66, 79, 93, 106, 119, 133, 146,	150,
+};
+
+static const u8 thsexitctl[] = {
+	15, 23, 31, 39, 47, 55, 63, 71, 79, 87,
+	95, 103, 111, 119, 127, 135, 143, 150,
+};
+
+/*
+ * rzv2h_dsi_timings_tables - main timing parameter lookup table
+ * Maps timing parameter enum to its frequency table, array length and
+ * base register offset value.
+ */
+static const struct rzv2h_mipi_dsi_timings rzv2h_dsi_timings_tables[] = {
+	[TCLKPRPRCTL] = {
+		.hsfreq = tclkprprctl,
+		.len = ARRAY_SIZE(tclkprprctl),
+		.base_value = 0,
+	},
+	[TCLKZEROCTL] = {
+		.hsfreq = tclkzeroctl,
+		.len = ARRAY_SIZE(tclkzeroctl),
+		.base_value = 2,
+	},
+	[TCLKPOSTCTL] = {
+		.hsfreq = tclkpostctl,
+		.len = ARRAY_SIZE(tclkpostctl),
+		.base_value = 6,
+	},
+	[TCLKTRAILCTL] = {
+		.hsfreq = tclktrailctl,
+		.len = ARRAY_SIZE(tclktrailctl),
+		.base_value = 1,
+	},
+	[THSPRPRCTL] = {
+		.hsfreq = thsprprctl,
+		.len = ARRAY_SIZE(thsprprctl),
+		.base_value = 0,
+	},
+	[THSZEROCTL] = {
+		.hsfreq = thszeroctl,
+		.len = ARRAY_SIZE(thszeroctl),
+		.base_value = 0,
+	},
+	[THSTRAILCTL] = {
+		.hsfreq = thstrailctl,
+		.len = ARRAY_SIZE(thstrailctl),
+		.base_value = 3,
+	},
+	[TLPXCTL] = {
+		.hsfreq = tlpxctl,
+		.len = ARRAY_SIZE(tlpxctl),
+		.base_value = 0,
+	},
+	[THSEXITCTL] = {
+		.hsfreq = thsexitctl,
+		.len = ARRAY_SIZE(thsexitctl),
+		.base_value = 1,
+	},
+};
+
+/**
+ * rzv2h_dphy_find_ulpsexit - Find ULP Exit timing value based on frequency
+ * The function maps frequency ranges to ULP exit timing values.
+ * Thresholds in the local hsfreq[] are expressed in Hz already.
+ *
+ * @freq: Input frequency in Hz
+ *
+ * Return: ULP exit timing value
+ */
+static u16 rzv2h_dphy_find_ulpsexit(unsigned long freq)
+{
+	/* Frequency thresholds in Hz for ULP exit timing selection */
+	static const unsigned long hsfreq[] = {
+		1953125UL,
+		3906250UL,
+		7812500UL,
+		15625000UL,
+	};
+	/* Corresponding ULP exit timing values for each frequency range */
+	static const u16 ulpsexit[] = {49, 98, 195, 391};
+	unsigned int i;
+
+	/* Find the appropriate frequency range */
+	for (i = 0; i < ARRAY_SIZE(hsfreq); i++) {
+		if (freq <= hsfreq[i])
+			break;
+	}
+
+	 /* If frequency exceeds all thresholds, use the highest range */
+	if (i == ARRAY_SIZE(hsfreq))
+		i--;
+
+	return ulpsexit[i];
+}
+
+/**
+ * rzv2h_dphy_find_timings_val - Find timing parameter value from lookup tables
+ * @freq: Input frequency in Hz
+ * @index: Index to select timing parameter table (see enum rzv2h_dsi_timing_idx)
+ *
+ * Selects the timing table for the requested parameter, finds the
+ * frequency range entry and returns the register value to program:
+ *
+ *   register_value = timings->base_value + table_index
+ *
+ * Note: frequency table entries are stored as small integers (units of 10):
+ *       threshold_in_hz = (unsigned long)table_entry * 10 * MEGA
+ *
+ * Return: timing register value to be programmed into hardware
+ */
+static u16 rzv2h_dphy_find_timings_val(unsigned long freq, u8 index)
+{
+	const struct rzv2h_mipi_dsi_timings *timings;
+	u16 i;
+
+	/* Get the timing table structure for the requested parameter */
+	timings = &rzv2h_dsi_timings_tables[index];
+
+	/*
+	 * Search through frequency table to find appropriate range
+	 * timings->hsfreq[i] contains frequency values from HW manual
+	 * Convert to Hz by multiplying by 10 * MEGA.
+	 */
+	for (i = 0; i < timings->len; i++) {
+		unsigned long hsfreq = timings->hsfreq[i] * 10 * MEGA;
+
+		if (freq <= hsfreq)
+			break;
+	}
+
+	/* If frequency exceeds table range, use the last entry */
+	if (i == timings->len)
+		i--;
+
+	/*
+	 * Calculate final register value:
+	 * - timings->base_value: base value for this timing parameter
+	 * - i: index into frequency table (0-based)
+	 * Combined they give the exact register value to program
+	 */
+	return timings->base_value + i;
+};
+
 static void rzg2l_mipi_dsi_phy_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
 {
 	iowrite32(data, dsi->mmio + dsi->info->phy_reg_offset + reg);
@@ -308,6 +563,169 @@ static int rzg2l_dphy_conf_clks(struct rzg2l_mipi_dsi *dsi, unsigned long mode_f
 	return 0;
 }
 
+static unsigned int rzv2h_dphy_mode_clk_check(struct rzg2l_mipi_dsi *dsi,
+					      unsigned long mode_freq)
+{
+	u64 hsfreq_millihz, mode_freq_hz, mode_freq_millihz;
+	struct rzv2h_pll_div_pars cpg_dsi_parameters;
+	struct rzv2h_pll_pars dsi_parameters;
+	bool parameters_found;
+	unsigned int bpp;
+
+	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+	mode_freq_hz = mul_u32_u32(mode_freq, KILO);
+	mode_freq_millihz = mode_freq_hz * MILLI;
+	parameters_found =
+		rzv2h_get_pll_divs_pars(dsi->info->cpg_plldsi.limits[0],
+					&cpg_dsi_parameters,
+					dsi->info->cpg_plldsi.table,
+					dsi->info->cpg_plldsi.table_size,
+					mode_freq_millihz);
+	if (!parameters_found)
+		return MODE_CLOCK_RANGE;
+
+	hsfreq_millihz = DIV_ROUND_CLOSEST_ULL(cpg_dsi_parameters.div.freq_millihz * bpp,
+					       dsi->lanes);
+	parameters_found = rzv2h_get_pll_pars(&rzv2h_plldsi_div_limits,
+					      &dsi_parameters, hsfreq_millihz);
+	if (!parameters_found)
+		return MODE_CLOCK_RANGE;
+
+	if (abs(dsi_parameters.error_millihz) >= 500)
+		return MODE_CLOCK_RANGE;
+
+	memcpy(&dsi->mode_calc.dsi_parameters, &dsi_parameters, sizeof(dsi_parameters));
+	dsi->mode_calc.mode_freq_khz = mode_freq;
+
+	return MODE_OK;
+}
+
+static int rzv2h_dphy_conf_clks(struct rzg2l_mipi_dsi *dsi, unsigned long mode_freq,
+				u64 *hsfreq_millihz)
+{
+	struct rzv2h_pll_pars *dsi_parameters = &dsi->mode_calc.dsi_parameters;
+	unsigned long status;
+
+	if (dsi->mode_calc.mode_freq_khz != mode_freq) {
+		status = rzv2h_dphy_mode_clk_check(dsi, mode_freq);
+		if (status != MODE_OK) {
+			dev_err(dsi->dev, "No PLL parameters found for mode clk %lu\n",
+				mode_freq);
+			return -EINVAL;
+		}
+	}
+
+	*hsfreq_millihz = dsi_parameters->freq_millihz;
+
+	return 0;
+}
+
+static int rzv2h_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
+				    u64 hsfreq_millihz)
+{
+	struct rzv2h_pll_pars *dsi_parameters = &dsi->mode_calc.dsi_parameters;
+	unsigned long lpclk_rate = clk_get_rate(dsi->lpclk);
+	u32 phytclksetr, phythssetr, phytlpxsetr, phycr;
+	struct rzg2l_mipi_dsi_timings dphy_timings;
+	u16 ulpsexit;
+	u64 hsfreq;
+
+	hsfreq = DIV_ROUND_CLOSEST_ULL(hsfreq_millihz, MILLI);
+
+	if (dsi_parameters->freq_millihz != hsfreq_millihz &&
+	    !rzv2h_get_pll_pars(&rzv2h_plldsi_div_limits, dsi_parameters,
+				hsfreq_millihz)) {
+		dev_err(dsi->dev, "No PLL parameters found for HSFREQ %lluHz\n", hsfreq);
+		return -EINVAL;
+	}
+
+	dphy_timings.tclk_trail =
+		rzv2h_dphy_find_timings_val(hsfreq, TCLKTRAILCTL);
+	dphy_timings.tclk_post =
+		rzv2h_dphy_find_timings_val(hsfreq, TCLKPOSTCTL);
+	dphy_timings.tclk_zero =
+		rzv2h_dphy_find_timings_val(hsfreq, TCLKZEROCTL);
+	dphy_timings.tclk_prepare =
+		rzv2h_dphy_find_timings_val(hsfreq, TCLKPRPRCTL);
+	dphy_timings.ths_exit =
+		rzv2h_dphy_find_timings_val(hsfreq, THSEXITCTL);
+	dphy_timings.ths_trail =
+		rzv2h_dphy_find_timings_val(hsfreq, THSTRAILCTL);
+	dphy_timings.ths_zero =
+		rzv2h_dphy_find_timings_val(hsfreq, THSZEROCTL);
+	dphy_timings.ths_prepare =
+		rzv2h_dphy_find_timings_val(hsfreq, THSPRPRCTL);
+	dphy_timings.tlpx =
+		rzv2h_dphy_find_timings_val(hsfreq, TLPXCTL);
+	ulpsexit = rzv2h_dphy_find_ulpsexit(lpclk_rate);
+
+	phytclksetr = FIELD_PREP(PHYTCLKSETR_TCLKTRAILCTL, dphy_timings.tclk_trail) |
+		      FIELD_PREP(PHYTCLKSETR_TCLKPOSTCTL, dphy_timings.tclk_post) |
+		      FIELD_PREP(PHYTCLKSETR_TCLKZEROCTL, dphy_timings.tclk_zero) |
+		      FIELD_PREP(PHYTCLKSETR_TCLKPRPRCTL, dphy_timings.tclk_prepare);
+	phythssetr = FIELD_PREP(PHYTHSSETR_THSEXITCTL, dphy_timings.ths_exit) |
+		     FIELD_PREP(PHYTHSSETR_THSTRAILCTL, dphy_timings.ths_trail) |
+		     FIELD_PREP(PHYTHSSETR_THSZEROCTL, dphy_timings.ths_zero) |
+		     FIELD_PREP(PHYTHSSETR_THSPRPRCTL, dphy_timings.ths_prepare);
+	phytlpxsetr = rzg2l_mipi_dsi_phy_read(dsi, PHYTLPXSETR) & ~PHYTLPXSETR_TLPXCTL;
+	phytlpxsetr |= FIELD_PREP(PHYTLPXSETR_TLPXCTL, dphy_timings.tlpx);
+	phycr = rzg2l_mipi_dsi_phy_read(dsi, PHYCR) & ~GENMASK(9, 0);
+	phycr |= FIELD_PREP(PHYCR_ULPSEXIT, ulpsexit);
+
+	/* Setting all D-PHY Timings Registers */
+	rzg2l_mipi_dsi_phy_write(dsi, PHYTCLKSETR, phytclksetr);
+	rzg2l_mipi_dsi_phy_write(dsi, PHYTHSSETR, phythssetr);
+	rzg2l_mipi_dsi_phy_write(dsi, PHYTLPXSETR, phytlpxsetr);
+	rzg2l_mipi_dsi_phy_write(dsi, PHYCR, phycr);
+
+	rzg2l_mipi_dsi_phy_write(dsi, PLLCLKSET0R,
+				 FIELD_PREP(PLLCLKSET0R_PLL_S, dsi_parameters->s) |
+				 FIELD_PREP(PLLCLKSET0R_PLL_P, dsi_parameters->p) |
+				 FIELD_PREP(PLLCLKSET0R_PLL_M, dsi_parameters->m));
+	rzg2l_mipi_dsi_phy_write(dsi, PLLCLKSET1R,
+				 FIELD_PREP(PLLCLKSET1R_PLL_K, dsi_parameters->k));
+
+	/*
+	 * From RZ/V2H HW manual (Rev.1.20) section 9.5.3 Operation,
+	 * (C) After write to D-PHY registers we need to wait for more than 1 x tp
+	 *
+	 * tp = 1 / (PLLREFCLK / PLLCLKSET0R.PLL_P)
+	 * PLLREFCLK = 24MHz
+	 * PLLCLKSET0R.PLL_P = {1, 2, 3, 4}
+	 *
+	 * To handle all the cases lets use PLLCLKSET0R.PLL_P = 4
+	 * tp = 1 / (24MHz / 4) = 1 / 6MHz = 166.67ns
+	 */
+	ndelay(200);
+
+	rzg2l_mipi_dsi_phy_write(dsi, PLLENR, PLLENR_PLLEN);
+	/*
+	 * From RZ/V2H HW manual (Rev.1.20) section 9.5.3 Operation,
+	 * (D) After write to PLLENR.PLLEN we need to wait for more than 3000 x tp
+	 *
+	 * 3000 x tp = 3000 x 0.16667 ns = 500.01 microseconds
+	 */
+	usleep_range(510, 520);
+
+	return 0;
+}
+
+static void rzv2h_mipi_dsi_dphy_startup_late_init(struct rzg2l_mipi_dsi *dsi)
+{
+	/*
+	 * From RZ/V2H HW manual (Rev.1.20) section 9.5.3 Operation,
+	 * (E) After write to TXSETR we need to wait for more than 200 microseconds
+	 * and then write to PHYRSTR
+	 */
+	usleep_range(210, 220);
+	rzg2l_mipi_dsi_phy_write(dsi, PHYRSTR, PHYRSTR_PHYMRSTN);
+}
+
+static void rzv2h_mipi_dsi_dphy_exit(struct rzg2l_mipi_dsi *dsi)
+{
+	rzg2l_mipi_dsi_phy_write(dsi, PLLENR, 0);
+}
+
 static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
 				  const struct drm_display_mode *mode)
 {
@@ -410,6 +828,9 @@ static void rzg2l_mipi_dsi_set_display_timing(struct rzg2l_mipi_dsi *dsi,
 	case 18:
 		vich1ppsetr = VICH1PPSETR_DT_RGB18;
 		break;
+	case 16:
+		vich1ppsetr = VICH1PPSETR_DT_RGB16;
+		break;
 	}
 
 	if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) &&
@@ -862,6 +1283,32 @@ static void rzg2l_mipi_dsi_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 }
 
+RZV2H_CPG_PLL_DSI_LIMITS(rzv2h_cpg_pll_dsi_limits);
+
+static const struct rzv2h_pll_limits *rzv2h_plldsi_limits[] = {
+	&rzv2h_cpg_pll_dsi_limits,
+};
+
+static const u8 rzv2h_cpg_div_table[] = {
+	2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32,
+};
+
+static const struct rzg2l_mipi_dsi_hw_info rzv2h_mipi_dsi_info = {
+	.dphy_init = rzv2h_mipi_dsi_dphy_init,
+	.dphy_startup_late_init = rzv2h_mipi_dsi_dphy_startup_late_init,
+	.dphy_exit = rzv2h_mipi_dsi_dphy_exit,
+	.dphy_mode_clk_check = rzv2h_dphy_mode_clk_check,
+	.dphy_conf_clks = rzv2h_dphy_conf_clks,
+	.cpg_plldsi.limits = rzv2h_plldsi_limits,
+	.cpg_plldsi.table = rzv2h_cpg_div_table,
+	.cpg_plldsi.table_size = ARRAY_SIZE(rzv2h_cpg_div_table),
+	.phy_reg_offset = 0x10000,
+	.link_reg_offset = 0,
+	.min_dclk = 5440,
+	.max_dclk = 187500,
+	.features = RZ_MIPI_DSI_FEATURE_16BPP,
+};
+
 static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
 	.dphy_init = rzg2l_mipi_dsi_dphy_init,
 	.dphy_exit = rzg2l_mipi_dsi_dphy_exit,
@@ -872,6 +1319,7 @@ static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
 };
 
 static const struct of_device_id rzg2l_mipi_dsi_of_table[] = {
+	{ .compatible = "renesas,r9a09g057-mipi-dsi", .data = &rzv2h_mipi_dsi_info, },
 	{ .compatible = "renesas,rzg2l-mipi-dsi", .data = &rzg2l_mipi_dsi_info, },
 	{ /* sentinel */ }
 };
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
index 16efe4dc59f4..87963871cacd 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
@@ -40,6 +40,39 @@
 #define DSIDPHYTIM3_THS_TRAIL(x)	((x) << 8)
 #define DSIDPHYTIM3_THS_ZERO(x)		((x) << 0)
 
+/* RZ/V2H DPHY Registers */
+#define PLLENR				0x000
+#define PLLENR_PLLEN			BIT(0)
+
+#define PHYRSTR				0x004
+#define PHYRSTR_PHYMRSTN		BIT(0)
+
+#define PLLCLKSET0R			0x010
+#define PLLCLKSET0R_PLL_S		GENMASK(2, 0)
+#define PLLCLKSET0R_PLL_P		GENMASK(13, 8)
+#define PLLCLKSET0R_PLL_M		GENMASK(25, 16)
+
+#define PLLCLKSET1R			0x014
+#define PLLCLKSET1R_PLL_K		GENMASK(15, 0)
+
+#define PHYTCLKSETR			0x020
+#define PHYTCLKSETR_TCLKTRAILCTL        GENMASK(7, 0)
+#define PHYTCLKSETR_TCLKPOSTCTL         GENMASK(15, 8)
+#define PHYTCLKSETR_TCLKZEROCTL         GENMASK(23, 16)
+#define PHYTCLKSETR_TCLKPRPRCTL         GENMASK(31, 24)
+
+#define PHYTHSSETR			0x024
+#define PHYTHSSETR_THSEXITCTL           GENMASK(7, 0)
+#define PHYTHSSETR_THSTRAILCTL          GENMASK(15, 8)
+#define PHYTHSSETR_THSZEROCTL           GENMASK(23, 16)
+#define PHYTHSSETR_THSPRPRCTL           GENMASK(31, 24)
+
+#define PHYTLPXSETR			0x028
+#define PHYTLPXSETR_TLPXCTL             GENMASK(7, 0)
+
+#define PHYCR				0x030
+#define PHYCR_ULPSEXIT                  GENMASK(9, 0)
+
 /* --------------------------------------------------------*/
 
 /* Link Status Register */
@@ -116,6 +149,7 @@
 
 /* Video-Input Channel 1 Pixel Packet Set Register */
 #define VICH1PPSETR			0x420
+#define VICH1PPSETR_DT_RGB16		(0x0e << 16)
 #define VICH1PPSETR_DT_RGB18		(0x1e << 16)
 #define VICH1PPSETR_DT_RGB18_LS		(0x2e << 16)
 #define VICH1PPSETR_DT_RGB24		(0x3e << 16)
-- 
2.51.0

[PATCH 6.12.y-cip 20/24] drm: renesas: rz-du: Add support for RZ/V2H(P) SoC

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 1f957fbb88b61eaf5ac9bf2db6bc2e54121a4359 upstream.

The LCD controller (LCDC) on the RZ/V2H(P) SoC is composed of Frame
Compression Processor (FCPVD), Video Signal Processor (VSPD), and
Display Unit (DU).

There is one LCDC unit available on the RZ/V2H(P) SoC which is connected
to the DSI.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
index 58d8f9947f82..c74afd18f70d 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
@@ -49,9 +49,20 @@ static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
 	}
 };
 
+static const struct rzg2l_du_device_info rzg2l_du_r9a09g057_info = {
+	.channels_mask = BIT(0),
+	.routes = {
+		[RZG2L_DU_OUTPUT_DSI0] = {
+			.possible_outputs = BIT(0),
+			.port = 0,
+		},
+	},
+};
+
 static const struct of_device_id rzg2l_du_of_table[] = {
 	{ .compatible = "renesas,r9a07g043u-du", .data = &rzg2l_du_r9a07g043u_info },
 	{ .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
+	{ .compatible = "renesas,r9a09g057-du", .data = &rzg2l_du_r9a09g057_info },
 	{ /* sentinel */ }
 };
 
-- 
2.51.0

[PATCH 6.12.y-cip 21/24] drm: renesas: rz-du: Drop ARCH_RZG2L dependency

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit a31c6c50da013dcd4de4889d402b47bae552a2e2 upstream.

The RZ/G2L DU driver is now also used on other Renesas SoCs such as
RZ/V2H(P) and RZ/V2N. Restricting it to ARCH_RZG2L prevents enabling it
on these newer platforms.

Replace the ARCH_RZG2L dependency with ARCH_RENESAS to allow the driver
to be built on all relevant Renesas SoCs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20251002123452.146610-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 drivers/gpu/drm/renesas/rz-du/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig b/drivers/gpu/drm/renesas/rz-du/Kconfig
index 835d99666424..85d90dabb9e7 100644
--- a/drivers/gpu/drm/renesas/rz-du/Kconfig
+++ b/drivers/gpu/drm/renesas/rz-du/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 config DRM_RZG2L_DU
 	tristate "DRM Support for RZ/G2L Display Unit"
-	depends on ARCH_RZG2L || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	depends on DRM && OF
 	depends on VIDEO_RENESAS_VSP1
 	select DRM_GEM_DMA_HELPER
-- 
2.51.0

[PATCH 6.12.y-cip 22/24] arm64: dts: renesas: r9a09g057: Add FCPV and VSPD nodes

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 0154078db6abbc8f1adc216e1b20472f0b50aaf8 upstream.

Add FCPV and VSPD nodes to RZ/V2H(P) SoC DTSI.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251023212314.679303-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 07ceaecd0f6c..4d883c8ae5ae 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -1247,6 +1247,30 @@ queue3 {
 				};
 			};
 		};
+
+		fcpvd: fcp@16470000 {
+			compatible = "renesas,r9a09g057-fcpvd", "renesas,fcpv";
+			reg = <0 0x16470000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0xed>,
+				 <&cpg CPG_MOD 0xee>,
+				 <&cpg CPG_MOD 0xef>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg 0xdc>;
+		};
+
+		vspd: vsp@16480000 {
+			compatible = "renesas,r9a09g057-vsp2", "renesas,r9a07g044-vsp2";
+			reg = <0 0x16480000 0 0x10000>;
+			interrupts = <GIC_SPI 881 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xed>,
+				 <&cpg CPG_MOD 0xee>,
+				 <&cpg CPG_MOD 0xef>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg 0xdc>;
+			renesas,fcp = <&fcpvd>;
+		};
 	};
 
 	stmmac_axi_setup: stmmac-axi-config {
-- 
2.51.0

[PATCH 6.12.y-cip 23/24] arm64: dts: renesas: r9a09g057: Add DU and DSI nodes

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit ebb6adecb992d5c6f16a830b9361092a1e791755 upstream.

Add DU and DSI nodes to RZ/V2H(P) SoC DTSI.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251023212314.679303-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 65 ++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 4d883c8ae5ae..112d289c0b14 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -1248,6 +1248,71 @@ queue3 {
 			};
 		};
 
+		dsi: dsi@16430000 {
+			compatible = "renesas,r9a09g057-mipi-dsi";
+			reg = <0 0x16430000 0 0x20000>;
+			interrupts = <GIC_SPI 874 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 875 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 876 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 877 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 878 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 879 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 880 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "seq0", "seq1", "vin1", "rcv",
+					  "ferr", "ppi", "debug";
+			clocks = <&cpg CPG_MOD 0xec>, <&cpg CPG_MOD 0xe9>,
+				 <&cpg CPG_MOD 0xe8>, <&cpg CPG_MOD 0xea>,
+				 <&cpg CPG_MOD 0xeb>;
+			clock-names = "pllrefclk", "aclk", "pclk", "vclk", "lpclk";
+			resets = <&cpg 0xd8>, <&cpg 0xd7>;
+			reset-names = "arst", "prst";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&du_out_dsi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		du: display@16460000 {
+			compatible = "renesas,r9a09g057-du";
+			reg = <0 0x16460000 0 0x10000>;
+			interrupts = <GIC_SPI 882 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xed>, <&cpg CPG_MOD 0xee>,
+				 <&cpg CPG_MOD 0xef>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg 0xdc>;
+			renesas,vsps = <&vspd 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
+		};
+
 		fcpvd: fcp@16470000 {
 			compatible = "renesas,r9a09g057-fcpvd", "renesas,fcpv";
 			reg = <0 0x16470000 0 0x10000>;
-- 
2.51.0

[PATCH 6.12.y-cip 24/24] arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable DU and DSI

[Ovidiu Panait]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit 947acdadcae0b1759f082266893d277cfb5b29c1 upstream.

Enable DU, DSI and adv7535 HDMI encoder on RZ/V2H Evaluation Kit.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251023212314.679303-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../dts/renesas/r9a09g057h44-rzv2h-evk.dts    | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
index 738ca0027d48..a2c8509648b6 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
@@ -35,6 +35,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	keys: keys {
 		compatible = "gpio-keys";
 
@@ -96,12 +107,36 @@ vqmmc_sdhi1: regulator-vccq-sdhi1 {
 		gpios-states = <0>;
 		states = <3300000 0>, <1800000 1>;
 	};
+
+	/* 12MHz crystal for ADV7535 */
+	y1: y1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
 };
 
 &audio_extal_clk {
 	clock-frequency = <22579200>;
 };
 
+&dsi {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
@@ -167,6 +202,42 @@ &i2c3 {
 	clock-frequency = <400000>;
 
 	status = "okay";
+
+	adv7535: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZV2H_GPIO(7, 1) IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&y1>;
+		clock-names = "cec";
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		a2vdd-supply = <&reg_1p8v>;
+		v3p3-supply = <&reg_3p3v>;
+		v1p2-supply = <&reg_1p8v>;
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c6 {
-- 
2.51.0

Re: [PATCH 6.12.y-cip 00/24] Add RZ/V2H display support

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 414 bytes --]

Hi!

> This series adds display support for the Renesas RZ/V2H SoC and EVK board.
> 
> All patches were cherry-picked from mainline kernel.

Similar to 6.1 version, this looks okay to me.

Reviewed-by: Pavel Machek <pavel@nabladev.com>

I can apply the series if it passes testing and there are no other
comments.

Best regards,
                                                                Pavel

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 6.12.y-cip 00/24] Add RZ/V2H display support

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 200 bytes --]

Hi!

> This series adds display support for the Renesas RZ/V2H SoC and EVK board.
> 
> All patches were cherry-picked from mainline kernel.

Thank you, applied.

Best regards,
								Pavel

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]