From: Steven Whitehouse <swhiteho@redhat.com>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH 4/4] mkfs.gfs2: Add align option and update docs
Date: Thu, 06 Jun 2013 13:15:05 +0100 [thread overview]
Message-ID: <1370520905.2744.9.camel@menhir> (raw)
In-Reply-To: <1370520213-29676-4-git-send-email-anprice@redhat.com>
Hi,
On Thu, 2013-06-06 at 13:03 +0100, Andrew Price wrote:
> Add an 'align' extended option for enabling and disabling resource group
> alignment and update the mkfs.gfs2 man page to document the new extended
> options.
>
> Signed-off-by: Andrew Price <anprice@redhat.com>
> ---
> gfs2/man/mkfs.gfs2.8 | 31 +++++++++++++++++++++++++++++++
> gfs2/mkfs/main_mkfs.c | 47 +++++++++++++++++++++++++++++++++++++++++++----
> 2 files changed, 74 insertions(+), 4 deletions(-)
>
> diff --git a/gfs2/man/mkfs.gfs2.8 b/gfs2/man/mkfs.gfs2.8
> index 4613305..ceb6f38 100644
> --- a/gfs2/man/mkfs.gfs2.8
> +++ b/gfs2/man/mkfs.gfs2.8
> @@ -48,6 +48,37 @@ storage).
> This option prevents gfs2_mkfs from asking for confirmation before writing
> the filesystem.
> .TP
> +\fB-o\fP
> +Specify extended options. Multiple options can be separated by commas. Valid extended options are:
> +.RS 1.0i
> +.TP
> +.BI help
> +Display an extended options help summary, then exit.
> +.TP
> +.BI sunit= bytes
> +This is used to specify the stripe unit for a RAID device or striped logical
> +volume. This option ensures that resource groups will be stripe unit aligned
> +and overrides the stripe unit value obtained by probing the device. This value
> +must be a multiple of the file system block size and must be specified with the
> +.I swidth
> +option.
> +.TP
> +.BI swidth= bytes
> +This is used to specify the stripe width for a RAID device or striped logical
> +volume. This option ensures that resource groups will be stripe aligned and overrides the stripe width value obtained by probing the device. This value must be a multiple of the
> +.I sunit
> +option and must also be specified with it.
> +.TP
> +.BI align= [0|1]
> +Disable or enable the alignment of resource groups. The default behaviour is to
> +align resource groups to the stripe width and stripe unit values obtained from
> +probing the device or specified with the
> +.I swidth
> +and
> +.I sunit
> +extended options.
> +.RE
> +.TP
> \fB-p\fP \fILockProtoName\fR
> LockProtoName is the name of the locking protocol to use. Acceptable
> locking protocols are \fIlock_dlm\fR (for shared storage) or if you are
> diff --git a/gfs2/mkfs/main_mkfs.c b/gfs2/mkfs/main_mkfs.c
> index dcfb032..fb4b5ca 100644
> --- a/gfs2/mkfs/main_mkfs.c
> +++ b/gfs2/mkfs/main_mkfs.c
> @@ -57,7 +57,7 @@ static void print_usage(const char *prog_name)
> "-j", _("<number>"), _("Number of journals"),
> "-K", NULL, _("Don't try to discard unused blocks"),
> "-O", NULL, _("Don't ask for confirmation"),
> - "-o", _("<key>[=<value>][,...]"), _("Specify extended options"),
> + "-o", _("<key>[=<value>][,...]"), _("Specify extended options. See '-o help'."),
> "-p", _("<name>"), _("Name of the locking protocol"),
> "-q", NULL, _("Don't print anything"),
> "-r", _("<size>"), _("Size of resource groups, in megabytes"),
> @@ -80,6 +80,22 @@ static void print_usage(const char *prog_name)
> }
> }
>
> +static void print_ext_opts(void)
> +{
> + int i;
> + const char *options[] = {
> + "help", _("Display this help, then exit"),
> + "swidth=N", _("Specify the stripe width of the device, overriding probed values"),
> + "sunit=N", _("Specify the stripe unit of the device, overriding probed values"),
> + "align=[0|1]", _("Disable or enable alignment of resource groups"),
I don't think that this is going to work with gettext since the _()
implies a function call,
Steve.
> + NULL, NULL
> + };
> + printf(_("Extended options:\n"));
> + for (i = 0; options[i] != NULL; i+=2) {
> + printf("%15s %-22s\n", options[i], options[i+1]);
> + }
> +}
> +
> struct mkfs_opts {
> unsigned bsize;
> unsigned qcsize;
> @@ -111,6 +127,7 @@ struct mkfs_opts {
> unsigned expert:1;
> unsigned debug:1;
> unsigned confirm:1;
> + unsigned align:1;
> };
>
> /**
> @@ -165,6 +182,7 @@ static void opts_init(struct mkfs_opts *opts)
> opts->lockproto = "lock_dlm";
> opts->locktable = "";
> opts->confirm = 1;
> + opts->align = 1;
> }
>
> #ifndef BLKDISCARD
> @@ -250,6 +268,18 @@ static unsigned long parse_ulong(struct mkfs_opts *opts, const char *key, const
> return (unsigned long)l;
> }
>
> +static unsigned parse_bool(struct mkfs_opts *opts, const char *key, const char *val)
> +{
> + if (strnlen(val, 2) == 1) {
> + if (*val == '0')
> + return 0;
> + if (*val == '1')
> + return 1;
> + }
> + fprintf(stderr, _("Option '%s' must be either 1 or 0\n"), key);
> + exit(-1);
> +}
> +
> static void opt_parse_extended(char *str, struct mkfs_opts *opts)
> {
> char *opt;
> @@ -266,6 +296,11 @@ static void opt_parse_extended(char *str, struct mkfs_opts *opts)
> } else if (strcmp("swidth", key) == 0) {
> opts->swidth = parse_ulong(opts, "swidth", val);
> opts->got_swidth = 1;
> + } else if (strcmp("align", key) == 0) {
> + opts->align = parse_bool(opts, "align", val);
> + } else if (strcmp("help", key) == 0) {
> + print_ext_opts();
> + exit(0);
> } else {
> fprintf(stderr, _("Invalid option '%s'\n"), key);
> exit(-1);
> @@ -603,7 +638,7 @@ static uint64_t align_block(const uint64_t base, const uint64_t align, const uin
> static void rgs_init(struct mkfs_rgs *rgs, struct mkfs_opts *opts, struct mkfs_dev *dev, struct gfs2_sbd *sdp)
> {
> memset(rgs, 0, sizeof(*rgs));
> - if (opts->got_sunit) {
> + if (opts->align && opts->got_sunit) {
> if ((opts->sunit % sdp->bsize) != 0) {
> fprintf(stderr, _("Stripe unit (%lu) must be a multiple of block size (%u)\n"),
> opts->sunit, sdp->bsize);
> @@ -616,7 +651,7 @@ static void rgs_init(struct mkfs_rgs *rgs, struct mkfs_opts *opts, struct mkfs_d
> rgs->align = opts->swidth / sdp->bsize;
> rgs->align_off = opts->sunit / sdp->bsize;
> }
> - } else {
> + } else if (opts->align) {
> if ((dev->minimum_io_size > dev->physical_sector_size) &&
> (dev->optimal_io_size > dev->physical_sector_size)) {
> rgs->align = dev->optimal_io_size / sdp->bsize;
> @@ -871,7 +906,11 @@ void main_mkfs(int argc, char *argv[])
> printf(" fssize = %"PRIu64"\n", opts.fssize);
> printf(" sunit = %lu\n", opts.sunit);
> printf(" swidth = %lu\n", opts.swidth);
> - printf(" rgrp align = %lu+%lu blocks\n", rgs.align, rgs.align_off);
> + printf(" rgrp align = ");
> + if (opts.align)
> + printf("%lu+%lu blocks\n", rgs.align, rgs.align_off);
> + else
> + printf("(disabled)\n");
> }
>
> warn_of_destruction(opts.device);
next prev parent reply other threads:[~2013-06-06 12:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-06 12:03 [Cluster-devel] [PATCH 1/4] mkfs.gfs2: Set sunit and swidth from probed io limits Andrew Price
2013-06-06 12:03 ` [Cluster-devel] [PATCH 2/4] mkfs.gfs2: Align resource groups to RAID stripes Andrew Price
2013-06-06 12:06 ` Steven Whitehouse
2013-06-06 12:19 ` Andrew Price
2013-06-06 12:57 ` Bob Peterson
2013-06-06 13:04 ` Andrew Price
2013-06-06 13:17 ` Bob Peterson
2013-06-06 13:11 ` Steven Whitehouse
2013-06-06 13:30 ` Bob Peterson
2013-06-06 15:17 ` Andrew Price
2013-06-06 12:03 ` [Cluster-devel] [PATCH 3/4] mkfs.gfs2: Create new resource groups on-demand Andrew Price
2013-06-06 13:07 ` Bob Peterson
2013-06-06 13:50 ` Andrew Price
2013-06-06 12:03 ` [Cluster-devel] [PATCH 4/4] mkfs.gfs2: Add align option and update docs Andrew Price
2013-06-06 12:15 ` Steven Whitehouse [this message]
2013-06-06 12:45 ` Andrew Price
2013-06-06 12:53 ` Steven Whitehouse
2013-06-06 13:13 ` Bob Peterson
2013-06-06 13:53 ` Andrew Price
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370520905.2744.9.camel@menhir \
--to=swhiteho@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).