From: Jan Kara <jack@suse.cz>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH 0/2 v2] Fix data corruption when blocksize < pagesize for mmapped data
Date: Fri, 10 Oct 2014 16:23:05 +0200 [thread overview]
Message-ID: <1412951028-4085-1-git-send-email-jack@suse.cz> (raw)
Hello,
this is a second version of the patches to fix data corruption in mmapped
data when blocksize < pagesize as tested by xfstests generic/030 test.
The patchset fixes XFS and ext4. I've checked and btrfs doesn't need fixing
because it doesn't support blocksize < pagesize. If that's ever going
to change btrfs will likely need a similar treatment. ocfs2, ext2, ext3 are
OK since they happily allocate blocks during writeback. For other filesystems
like gfs2, ubifs, nilfs, ceph,... I'm not sure whether they support blocksize <
pagesize@all. Interesting is also NFS which may care but I don't understand
its ->page_mkwrite() handler good enough to judge.
Changes since v1:
- changed helper function name and moved it to mm/truncate.c - I originally
thought we can make the helper function update i_size to simplify the
interface but it's actually impossible due to generic_write_end() lock
ordering constraints.
- used round_up() instead of ALIGN()
- taught truncate_setsize() to use the helper function
Honza
next reply other threads:[~2014-10-10 14:23 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-10 14:23 Jan Kara [this message]
2014-10-10 14:23 ` [Cluster-devel] [PATCH 1/2 RESEND] bdi: Fix hung task on sync Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] block: free q->flush_rq in blk_init_allocated_queue error paths Jan Kara
2014-10-10 15:19 ` Dave Jones
2014-10-10 15:32 ` Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] block: improve rq_affinity placement Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] block: Make rq_affinity = 1 work as expected Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] block: strict rq_affinity Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext3: Fix deadlock in data=journal mode when fs is frozen Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext3: Speedup WB_SYNC_ALL pass Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext4: Avoid lock inversion between i_mmap_mutex and transaction start Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 1/2] ext4: Don't check quota format when there are no quota files Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 1/2] ext4: Fix block zeroing when punching holes in indirect block files Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext4: Fix buffer double free in ext4_alloc_branch() Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext4: Fix jbd2 warning under heavy xattr load Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext4: Fix zeroing of page during writeback Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext4: Remove orphan list handling Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ext4: Speedup WB_SYNC_ALL pass Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH for 3.14-stable] fanotify: fix double free of pending permission events Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] fs: Avoid userspace mounting anon_inodefs filesystem Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 1/2] jbd2: Avoid pointless scanning of checkpoint lists Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] jbd2: Optimize jbd2_log_do_checkpoint() a bit Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] lockdep: Dump info via tracing Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] mm: Fixup pagecache_isize_extended() definitions for !CONFIG_MMU Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ncpfs: fix rmdir returns Device or resource busy Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] ocfs2: Fix quota file corruption Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 1/2] printk: Debug patch1 Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] printk: debug: Slow down printing to 9600 bauds Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] printk: enable interrupts before calling console_trylock_for_printk() Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] quota: Fix race between dqput() and dquot_scan_active() Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] scsi: Keep interrupts disabled while submitting requests Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] sync: don't block the flusher thread waiting on IO Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] udf: Avoid infinite loop when processing indirect ICBs Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] udf: Print error when inode is loaded Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] vfs: Allocate anon_inode_inode in anon_inode_init() Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 1/2] vfs: Fix data corruption when blocksize < pagesize for mmaped data Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH RESEND] vfs: Return EINVAL for default SEEK_HOLE, SEEK_DATA implementation Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] writeback: plug writeback at a high level Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH] x86: Fixup lockdep complaint caused by io apic code Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 2/2 RESEND] bdi: Avoid oops on device removal Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 2/2] ext3: Don't check quota format when there are no quota files Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 2/2] ext4: Fix hole punching for files with indirect blocks Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 2/2] ext4: Fix mmap data corruption when blocksize < pagesize Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 2/2] jbd2: Simplify calling convention around __jbd2_journal_clean_checkpoint_list Jan Kara
2014-10-10 14:23 ` [Cluster-devel] [PATCH 2/2] printk: Debug patch 2 Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412951028-4085-1-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).