From: Steven Whitehouse <swhiteho@redhat.com>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH 05/15] GFS2: Use inode_newsize_ok and get_write_access in fallocate
Date: Mon, 8 Dec 2014 12:38:13 +0000 [thread overview]
Message-ID: <1418042303-1536-6-git-send-email-swhiteho@redhat.com> (raw)
In-Reply-To: <1418042303-1536-1-git-send-email-swhiteho@redhat.com>
From: Andrew Price <anprice@redhat.com>
gfs2_fallocate wasn't checking inode_newsize_ok nor get_write_access.
Split out the context setup and inode locking pieces into a separate
function to make it more clear and add these missing calls.
inode_newsize_ok is called conditional on FALLOC_FL_KEEP_SIZE as there
is no need to enforce a file size limit if it isn't going to change.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 5ebe568..3786579 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -797,8 +797,7 @@ static void calc_max_reserv(struct gfs2_inode *ip, loff_t max, loff_t *len,
}
}
-static long gfs2_fallocate(struct file *file, int mode, loff_t offset,
- loff_t len)
+static long __gfs2_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
struct gfs2_sbd *sdp = GFS2_SB(inode);
@@ -812,14 +811,9 @@ static long gfs2_fallocate(struct file *file, int mode, loff_t offset,
loff_t bsize_mask = ~((loff_t)sdp->sd_sb.sb_bsize - 1);
loff_t next = (offset + len - 1) >> sdp->sd_sb.sb_bsize_shift;
loff_t max_chunk_size = UINT_MAX & bsize_mask;
- struct gfs2_holder gh;
next = (next + 1) << sdp->sd_sb.sb_bsize_shift;
- /* We only support the FALLOC_FL_KEEP_SIZE mode */
- if (mode & ~FALLOC_FL_KEEP_SIZE)
- return -EOPNOTSUPP;
-
offset &= bsize_mask;
len = next - offset;
@@ -830,17 +824,6 @@ static long gfs2_fallocate(struct file *file, int mode, loff_t offset,
if (bytes == 0)
bytes = sdp->sd_sb.sb_bsize;
- error = gfs2_rs_alloc(ip);
- if (error)
- return error;
-
- mutex_lock(&inode->i_mutex);
-
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
- error = gfs2_glock_nq(&gh);
- if (unlikely(error))
- goto out_uninit;
-
gfs2_size_hint(file, offset, len);
while (len > 0) {
@@ -853,8 +836,7 @@ static long gfs2_fallocate(struct file *file, int mode, loff_t offset,
}
error = gfs2_quota_lock_check(ip);
if (error)
- goto out_unlock;
-
+ return error;
retry:
gfs2_write_calc_reserv(ip, bytes, &data_blocks, &ind_blocks);
@@ -898,18 +880,58 @@ retry:
if (error == 0)
error = generic_write_sync(file, pos, count);
- goto out_unlock;
+ return error;
out_trans_fail:
gfs2_inplace_release(ip);
out_qunlock:
gfs2_quota_unlock(ip);
+ return error;
+}
+
+static long gfs2_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
+{
+ struct inode *inode = file_inode(file);
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ if (mode & ~FALLOC_FL_KEEP_SIZE)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&inode->i_mutex);
+
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret)
+ goto out_uninit;
+
+ if (!(mode & FALLOC_FL_KEEP_SIZE) &&
+ (offset + len) > inode->i_size) {
+ ret = inode_newsize_ok(inode, offset + len);
+ if (ret)
+ goto out_unlock;
+ }
+
+ ret = get_write_access(inode);
+ if (ret)
+ goto out_unlock;
+
+ ret = gfs2_rs_alloc(ip);
+ if (ret)
+ goto out_putw;
+
+ ret = __gfs2_fallocate(file, mode, offset, len);
+ if (ret)
+ gfs2_rs_deltree(ip->i_res);
+out_putw:
+ put_write_access(inode);
out_unlock:
gfs2_glock_dq(&gh);
out_uninit:
gfs2_holder_uninit(&gh);
mutex_unlock(&inode->i_mutex);
- return error;
+ return ret;
}
#ifdef CONFIG_GFS2_FS_LOCKING_DLM
--
1.8.3.1
next prev parent reply other threads:[~2014-12-08 12:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-08 12:38 [Cluster-devel] GFS2: Pre-pull patch posting (merge window) Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 01/15] GFS2: directly return gfs2_dir_check() Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 02/15] GFS2: Set of distributed preferences for rgrps Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 03/15] GFS2: Only increase rs_sizehint Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 04/15] GFS2: If we use up our block reservation, request more next time Steven Whitehouse
2014-12-08 12:38 ` Steven Whitehouse [this message]
2014-12-08 12:38 ` [Cluster-devel] [PATCH 06/15] GFS2: Update i_size properly on fallocate Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 07/15] GFS2: Update timestamps " Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 08/15] fs: add freeze_super/thaw_super fs hooks Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 09/15] GFS2: update freeze code to use freeze/thaw_super on all nodes Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 10/15] GFS2: Deletion of unnecessary checks before two function calls Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 11/15] GFS2: bugger off early if O_CREAT open finds a directory Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 12/15] GFS2: gfs2_create_inode(): don't bother with d_splice_alias() Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 13/15] GFS2: use kvfree() instead of open-coding it Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 14/15] GFS2: gfs2_dir_get_hash_table(): avoiding deferred vfree() is easy here Steven Whitehouse
2014-12-08 12:38 ` [Cluster-devel] [PATCH 15/15] GFS2: gfs2_atomic_open(): simplify the use of finish_no_open() Steven Whitehouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418042303-1536-6-git-send-email-swhiteho@redhat.com \
--to=swhiteho@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).