From: kupcevic@sourceware.org <kupcevic@sourceware.org>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] conga/luci/site/luci/Extensions StorageReport. ...
Date: 9 Oct 2006 17:01:20 -0000 [thread overview]
Message-ID: <20061009170120.1461.qmail@sourceware.org> (raw)
CVSROOT: /cvs/cluster
Module name: conga
Changes by: kupcevic at sourceware.org 2006-10-09 17:01:20
Modified files:
luci/site/luci/Extensions: StorageReport.py
conga_storage_constants.py
storage_adapters.py
Log message:
luci storage: centralize pretty names and icons
Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/conga/luci/site/luci/Extensions/StorageReport.py.diff?cvsroot=cluster&r1=1.10&r2=1.11
http://sourceware.org/cgi-bin/cvsweb.cgi/conga/luci/site/luci/Extensions/conga_storage_constants.py.diff?cvsroot=cluster&r1=1.6&r2=1.7
http://sourceware.org/cgi-bin/cvsweb.cgi/conga/luci/site/luci/Extensions/storage_adapters.py.diff?cvsroot=cluster&r1=1.4&r2=1.5
--- conga/luci/site/luci/Extensions/StorageReport.py 2006/10/06 22:08:13 1.10
+++ conga/luci/site/luci/Extensions/StorageReport.py 2006/10/09 17:01:19 1.11
@@ -443,50 +443,12 @@
sources.append(get_bd_data_internal(session, s_xml, mapper))
type = mapper.getAttribute('mapper_type')
- pretty_type = 'Mapper'
+ pretty_type, pretty_target_name, pretty_source_name = get_pretty_mapper_info(type)
pretty_name = mapper_id.replace(type + ':', '').replace('/dev/', '')
- pretty_target_name = 'target'
- pretty_source_name = 'source'
- icon_name = ''
- color = 'black'
- if type == MAPPER_SYS_TYPE:
- pretty_type = 'Hard Drives'
- pretty_target_name = 'Hard Drive'
- elif type == MAPPER_VG_TYPE:
- pretty_type = 'Volume Group'
- pretty_target_name = 'Logical Volume'
- pretty_source_name = 'Physical Volume'
- icon_name = 'icon_mapper_VG.png'
- elif type == MAPPER_PT_TYPE:
- pretty_type = 'Partition Table'
- pretty_target_name = 'Partition'
- pretty_source_name = 'Disk'
- icon_name = 'icon_mapper_PT.png'
- elif type == MAPPER_MDRAID_TYPE:
- pretty_type = 'Software RAID'
- pretty_target_name = 'Volume'
- pretty_source_name = 'Disk'
- icon_name = 'icon_mapper_raid.png'
- elif type == MAPPER_ATARAID_TYPE:
- pretty_type = 'ATA-RAID'
- pretty_target_name = 'Volume'
- pretty_source_name = 'Disk'
- icon_name = 'icon_mapper_raid.png'
- elif type == MAPPER_MULTIPATH_TYPE:
- pretty_type = 'Multipath'
- pretty_target_name = 'Multipath'
- pretty_source_name = 'Path'
- icon_name = 'icon_mapper_multipath.png'
- elif type == MAPPER_CRYPTO_TYPE:
- pretty_type = 'Encryption'
- pretty_target_name = 'Volume'
- pretty_source_name = 'Device'
- icon_name = 'icon_mapper_crypto.png'
- elif type == MAPPER_iSCSI_TYPE:
- pretty_type = 'iSCSI'
- pretty_target_name = 'Volume'
pretty_targets_name = pretty_target_name + 's'
pretty_sources_name = pretty_source_name + 's'
+ icon_name, dummy1, dummy2 = get_mapper_icons(type)
+ color = 'black'
mapper_ret = {}
mapper_ret['pretty_type'] = pretty_type
@@ -496,7 +458,7 @@
mapper_ret['pretty_source_name'] = pretty_source_name
mapper_ret['pretty_sources_name'] = pretty_sources_name
mapper_ret['mapper_id'] = mapper_id
- mapper_ret['mapper_type'] = mapper.getAttribute('mapper_type')
+ mapper_ret['mapper_type'] = type
mapper_ret['props'] = props
mapper_ret['targets'] = targets
mapper_ret['new_targets'] = new_targets
@@ -639,50 +601,12 @@
sources.append(get_bd_data_internal(session, s_xml, mapper))
type = mapper.getAttribute('mapper_type')
- pretty_type = 'Mapper'
+ pretty_type, pretty_target_name, pretty_source_name = get_pretty_mapper_info(type)
pretty_name = mapper_id.replace(type + ':', '').replace('/dev/', '')
- pretty_target_name = 'target'
- pretty_source_name = 'source'
- icon_name = 'none'
- color = 'black'
- if type == MAPPER_SYS_TYPE:
- pretty_type = 'Hard Drives'
- pretty_target_name = 'Hard Drive'
- elif type == MAPPER_VG_TYPE:
- pretty_type = 'Volume Group'
- pretty_target_name = 'Logical Volume'
- pretty_source_name = 'Physical Volume'
- icon_name = 'icon_mapper_VG.png'
- elif type == MAPPER_PT_TYPE:
- pretty_type = 'Partition Table'
- pretty_target_name = 'Partition'
- pretty_source_name = 'Disk'
- icon_name = 'icon_mapper_PT.png'
- elif type == MAPPER_MDRAID_TYPE:
- pretty_type = 'Software RAID'
- pretty_target_name = 'Volume'
- pretty_source_name = 'Disk'
- icon_name = 'icon_mapper_raid.png'
- elif type == MAPPER_ATARAID_TYPE:
- pretty_type = 'ATA-RAID'
- pretty_target_name = 'Volume'
- pretty_source_name = 'Disk'
- icon_name = 'icon_mapper_raid.png'
- elif type == MAPPER_MULTIPATH_TYPE:
- pretty_type = 'Multipath'
- pretty_target_name = 'Multipath'
- pretty_source_name = 'Path'
- icon_name = 'icon_mapper_multipath.png'
- elif type == MAPPER_CRYPTO_TYPE:
- pretty_type = 'Encryption'
- pretty_target_name = 'Volume'
- pretty_source_name = 'Device'
- icon_name = 'icon_mapper_crypto.png'
- elif type == MAPPER_iSCSI_TYPE:
- pretty_type = 'iSCSI'
- pretty_target_name = 'Volume'
pretty_targets_name = pretty_target_name + 's'
pretty_sources_name = pretty_source_name + 's'
+ icon_name, dummy1, dummy2 = get_mapper_icons(type)
+ color = 'black'
min_sources = '0'
max_sources = '0'
@@ -704,7 +628,7 @@
mapper_ret['pretty_source_name'] = pretty_source_name
mapper_ret['pretty_sources_name'] = pretty_sources_name
mapper_ret['mapper_id'] = mapper_id
- mapper_ret['mapper_type'] = mapper.getAttribute('mapper_type')
+ mapper_ret['mapper_type'] = type
mapper_ret['props'] = props
#mapper_ret['removable'] = removable
mapper_ret['targets'] = targets
@@ -1523,42 +1447,24 @@
mapper_id = bd_xml.getAttribute('mapper_id')
contents = get_content_data_internal(session, bd_xml)
- type = bd_xml.getAttribute('mapper_type')
+ pretty_mapper_type, pretty_type, dummy2 = get_pretty_mapper_info(mapper_type)
pretty_name = path.replace('/dev/','')
- pretty_type = 'Block Device'
+ dummy1, icon_name, dummy2 = get_mapper_icons(mapper_type)
+ color = 'black'
+
size_in_units, units = bytes_to_value_units(props['size']['value'])
description = str(size_in_units) + ' ' + units
- icon_name = ''
- color = 'black'
- if type == MAPPER_SYS_TYPE:
- pretty_type = 'Hard Drive'
- icon_name = 'icon_bd_ide.png'
+
+ if mapper_type == MAPPER_SYS_TYPE:
if 'scsi_id' in props:
description += ', SCSI ID = ' + props['scsi_id']['value']
icon_name = 'icon_bd_scsi.png'
- elif type == MAPPER_VG_TYPE:
+ elif mapper_type == MAPPER_VG_TYPE:
pretty_name = props['lvname']['value']
- pretty_type = 'Logical Volume'
+ color = '#0192db'
if props['snapshot']['value'] == 'true':
icon_name = 'icon_bd_LV_snapshot.png'
- else:
- icon_name = 'icon_bd_LV.png'
- color = '#0192db'
- elif type == MAPPER_PT_TYPE:
- pretty_type = 'Partition'
- icon_name = 'icon_bd_partition.png'
- elif type == MAPPER_MDRAID_TYPE or type == MAPPER_ATARAID_TYPE:
- pretty_type = 'Volume'
- icon_name = 'icon_bd_raid.png'
- elif type == MAPPER_MULTIPATH_TYPE:
- pretty_type = 'Multipath'
- icon_name = 'icon_bd_multipath.png'
- elif type == MAPPER_CRYPTO_TYPE:
- pretty_type = 'Volume'
- icon_name = 'icon_bd_crypto.png'
- elif type == MAPPER_iSCSI_TYPE:
- pretty_type = 'Volume'
- icon_name = 'icon_bd_net.png'
+ pretty_type = 'Snapshot'
if bd_xml.nodeName == BD_TEMPLATE:
path = 'unused_segment'
@@ -1575,12 +1481,9 @@
if data['new']:
contents = []
path = 'new_snapshot'
- pretty_type = 'New Snapshot'
pretty_name = ''
- else:
- pretty_type = 'Snapshot'
- #pretty_name = 'Unused Space'
-
+
+ data['pretty_mapper_type'] = pretty_mapper_type
data['pretty_type'] = pretty_type
data['pretty_name'] = pretty_name
data['description'] = description
@@ -1772,24 +1675,12 @@
icon_name = ''
type = d['xml'].getAttribute('type')
if type == 'filesystem':
- icon_name = 'icon_content_FS.png'
+ icon_name = get_fs_icon(d['xml'].getAttribute('fs_type'))
elif type == 'mapper_source':
mapper_type = d['xml'].getAttribute('mapper_type')
- if mapper_type == MAPPER_SYS_TYPE:
- pass
- elif mapper_type == MAPPER_VG_TYPE:
+ dummy1, dummy2, icon_name = get_mapper_icons(mapper_type)
+ if mapper_type == MAPPER_VG_TYPE:
color = '#a43737'
- icon_name = 'icon_content_PV.png'
- elif mapper_type == MAPPER_PT_TYPE:
- pass
- elif mapper_type == MAPPER_MDRAID_TYPE or mapper_type == MAPPER_ATARAID_TYPE:
- pass
- elif mapper_type == MAPPER_MULTIPATH_TYPE:
- pass
- elif mapper_type == MAPPER_CRYPTO_TYPE:
- pass
- elif mapper_type == MAPPER_iSCSI_TYPE:
- pass
elif type == 'none':
pass
elif type == 'hidden':
@@ -1820,7 +1711,7 @@
elif mapper_type == MAPPER_VG_TYPE:
name = 'Physical Volume'
elif mapper_type == MAPPER_PT_TYPE:
- name = 'Partition Table\'s Disk'
+ name = 'Partition Table'
elif mapper_type == MAPPER_MDRAID_TYPE:
name = 'Software RAID Disk'
elif mapper_type == MAPPER_ATARAID_TYPE:
--- conga/luci/site/luci/Extensions/conga_storage_constants.py 2006/10/05 16:11:37 1.6
+++ conga/luci/site/luci/Extensions/conga_storage_constants.py 2006/10/09 17:01:19 1.7
@@ -73,112 +73,140 @@
-PRETTY_MAPPER_NAMES = {MAPPER_SYS_TYPE : 'Hard Drive',
- MAPPER_VG_TYPE : 'Volume Group',
- MAPPER_PT_TYPE : 'Partition Table',
- MAPPER_MDRAID_TYPE : 'Software RAID',
- MAPPER_ATARAID_TYPE : 'ATA-RAID',
- MAPPER_MULTIPATH_TYPE : 'Multipath',
- MAPPER_CRYPTO_TYPE : 'Encryption',
- MAPPER_iSCSI_TYPE : 'iSCSI'}
-
+# pretty names
+PRETTY_MAPPER_INFO = {MAPPER_SYS_TYPE : ('Hard Drives', 'Hard Drive', 'BUG: source not defined'),
+ MAPPER_VG_TYPE : ('Volume Group', 'Logical Volume', 'Physical Volume'),
+ MAPPER_PT_TYPE : ('Partition Table', 'Partition', 'Disk'),
+ MAPPER_MDRAID_TYPE : ('Software RAID', 'Volume', 'Disk'),
+ MAPPER_ATARAID_TYPE : ('ATA-RAID', 'Volume', 'Disk'),
+ MAPPER_MULTIPATH_TYPE : ('Multipath', 'Multipath', 'Path'),
+ MAPPER_CRYPTO_TYPE : ('Encryption', 'Volume', 'Device'),
+ MAPPER_iSCSI_TYPE : ('iSCSI', 'Volume', 'BUG: source not defined')}
+def get_pretty_mapper_info(mapper_type):
+ try:
+ return PRETTY_MAPPER_INFO[mapper_type]
+ except:
+ return ('Mapper ' + mapper_type, mapper_type + '\s target', mapper_type + '\s source')
+
+PRETTY_PROP_NAMES = {'active' : "Active",
+ 'attrs' : 'Attributes',
+ 'bd' : "Block Device",
+ 'block_count' : "Number of Blocks",
+ 'block_size' : "Block Size",
+ 'bootable' : "Bootable",
+ 'cluster_name' : "Cluster Name",
+ 'clustered' : "Clustered",
+ 'dir_index' : "Use Hashed Binary Trees",
+ 'disklabel' : "Partition Table Type",
+ 'extents_free' : "Free Extents",
+ 'extent_size' : "Extent Size",
+ 'extents_total' : "Total Extents",
+ 'extents_used' : "Used Extents",
+ 'failed' : "Failed",
+ 'format' : "Format",
+ 'fstab' : "List in /etc/fstab",
+ 'fstabpoint' : "/etc/fstab Mountpoint",
+ 'gfs_fsname' : "Unique GFS Name",
+ 'has_journal' : "Journaling Enabled - ext3",
+ 'journals_num' : "Number Of Journals",
+ 'journal_size' : "Journal Size",
+ 'label' : "Label",
+ 'level' : "Level",
+ 'locking_protocol' : "Locking Protocol",
+ 'lvname' : "Logical Volume Name",
+ 'max_lvs' : "Maximum Logical Volumes",
+ 'max_pvs' : "Maximum Physical Volumes",
+ 'max_sources' : "Maximum Disks",
+ 'min_sources' : "Minimum Disks",
+ 'mirrored' : "Mirrored",
+ 'model' : "Model",
+ 'mount' : "Mount",
+ 'mountable' : "Mountable",
+ 'mountpoint' : "Mountpoint",
+ 'num_devices' : "Number of Devices",
+ 'num_spares' : "Number of Spares",
+ 'partition_begin' : "Partition Begin",
+ 'partition_num' : "Partition Number",
+ 'partition_type' : "Partition Type",
+ 'path' : "Path",
+ 'raid' : "Raid",
+ 'raid_level' : "Raid Level",
+ 'removable' : "Removable",
+ 'scsi_bus' : "SCSI Address",
+ 'scsi_id' : "SCSI ID",
+ 'size' : "Size",
+ 'size_free' : "Unused",
+ 'snapshot' : "Snapshot",
+ 'snapshot_origin' : "Snapshot Origin",
+ 'snapshots' : "Snapshots",
+ 'snapshot_usage_percent' : "Snapshot Usage",
+ 'state' : "State",
+ 'swapon' : "Active Swap",
+ 'type' : "Type",
+ 'uuid' : "UUID",
+ 'vendor' : "Vendor",
+ 'vgname' : "Volume Group Name"}
def get_pretty_prop_name(name):
- PRETTY_PROP_NAMES = {'active' : "Active",
- 'attrs' : 'Attributes',
- 'bd' : "Block Device",
- 'block_count' : "Number of Blocks",
- 'block_size' : "Block Size",
- 'bootable' : "Bootable",
- 'cluster_name' : "Cluster Name",
- 'clustered' : "Clustered",
- 'dir_index' : "Use Hashed Binary Trees",
- 'disklabel' : "Partition Table Type",
- 'extents_free' : "Free Extents",
- 'extent_size' : "Extent Size",
- 'extents_total' : "Total Extents",
- 'extents_used' : "Used Extents",
- 'failed' : "Failed",
- 'format' : "Format",
- 'fstab' : "List in /etc/fstab",
- 'fstabpoint' : "/etc/fstab Mountpoint",
- 'gfs_fsname' : "Unique GFS Name",
- 'has_journal' : "Journaling Enabled - ext3",
- 'journals_num' : "Number Of Journals",
- 'journal_size' : "Journal Size",
- 'label' : "Label",
- 'level' : "Level",
- 'locking_protocol' : "Locking Protocol",
- 'lvname' : "Logical Volume Name",
- 'max_lvs' : "Maximum Logical Volumes",
- 'max_pvs' : "Maximum Physical Volumes",
- 'max_sources' : "Maximum Disks",
- 'min_sources' : "Minimum Disks",
- 'mirrored' : "Mirrored",
- 'model' : "Model",
- 'mount' : "Mount",
- 'mountable' : "Mountable",
- 'mountpoint' : "Mountpoint",
- 'num_devices' : "Number of Devices",
- 'num_spares' : "Number of Spares",
- 'partition_begin' : "Partition Begin",
- 'partition_num' : "Partition Number",
- 'partition_type' : "Partition Type",
- 'path' : "Path",
- 'raid' : "Raid",
- 'raid_level' : "Raid Level",
- 'removable' : "Removable",
- 'scsi_bus' : "SCSI Address",
- 'scsi_id' : "SCSI ID",
- 'size' : "Size",
- 'size_free' : "Unused",
- 'snapshot' : "Snapshot",
- 'snapshot_origin' : "Snapshot Origin",
- 'snapshots' : "Snapshots",
- 'snapshot_usage_percent' : "Snapshot Usage",
- 'state' : "State",
- 'swapon' : "Active Swap",
- 'type' : "Type",
- 'uuid' : "UUID",
- 'vendor' : "Vendor",
- 'vgname' : "Volume Group Name"}
-
- if name in PRETTY_PROP_NAMES:
+ try:
return PRETTY_PROP_NAMES[name]
- return name
-
-
+ except:
+ return name
+PRETTY_FS_NAMES = {'ext' : "Linux Extended FS",
+ 'swap' : "Swap",
+ 'gfs1' : "GFS1 - Global FS v.1",
+ 'gfs2' : "GFS2 - Global FS v.2",
+ 'minix' : "Minix FS",
+ 'ufs' : "Unix Fast FS",
+ 'xfs' : "SGI XFS",
+ 'isofs' : "ISO 9660 CD-ROM FS",
+ 'cramfs' : "Cram FS",
+ 'raiserfs' : "Reiser FS",
+ 'jffs' : "Journalled Flash FS v.1",
+ 'jffs2' : "Journalled Flash FS v.2",
+ 'squashfs' : "Squash FS",
+ 'vfat' : "MS vfat FS",
+ 'msdos' : "MS-DOS FS",
+ 'affs' : "Amiga FS",
+ 'befs' : "BeOS FS",
+ 'bfs' : "SCO UnixWare BFS",
+ 'jfs' : "Journaled Filesystem (JFS)",
+ 'efs' : "efs",
+ 'freevxfs' : "Veritas Filesystem (VxFS)",
+ 'hfsplus' : "Macintosh extended FS",
+ 'hfs' : "Macintosh FS",
+ 'ncpfs' : "ncpfs",
+ 'ocfs2' : "Oracle Clustered FS v.2",
+ 'relayfs' : "Relay FS",
+ 'udf' : "Universal Disk Format"}
def get_pretty_fs_name(name):
- PRETTY_FS_NAMES = {'ext' : "Linux Extended FS",
- 'swap' : "Swap",
- 'gfs1' : "GFS1 - Global FS v.1",
- 'gfs2' : "GFS2 - Global FS v.2",
- 'minix' : "Minix FS",
- 'ufs' : "Unix Fast FS",
- 'xfs' : "SGI XFS",
- 'isofs' : "ISO 9660 CD-ROM FS",
- 'cramfs' : "Cram FS",
- 'raiserfs' : "Reiser FS",
- 'jffs' : "Journalled Flash FS v.1",
- 'jffs2' : "Journalled Flash FS v.2",
- 'squashfs' : "Squash FS",
- 'vfat' : "MS vfat FS",
- 'msdos' : "MS-DOS FS",
- 'affs' : "Amiga FS",
- 'befs' : "BeOS FS",
- 'bfs' : "SCO UnixWare BFS",
- 'jfs' : "Journaled Filesystem (JFS)",
- 'efs' : "efs",
- 'freevxfs' : "Veritas Filesystem (VxFS)",
- 'hfsplus' : "Macintosh extended FS",
- 'hfs' : "Macintosh FS",
- 'ncpfs' : "ncpfs",
- 'ocfs2' : "Oracle Clustered FS v.2",
- 'relayfs' : "Relay FS",
- 'udf' : "Universal Disk Format"}
-
- if name in PRETTY_FS_NAMES:
+ try:
return PRETTY_FS_NAMES[name]
- return name
+ except:
+ return name
+
+
+
+
+# icons
+
+MAPPER_ICONS = {MAPPER_SYS_TYPE : ('', 'icon_bd_ide.png', ''),
+ MAPPER_VG_TYPE : ('icon_mapper_VG.png', 'icon_bd_LV.png', 'icon_content_PV.png'),
+ MAPPER_PT_TYPE : ('icon_mapper_PT.png', 'icon_bd_partition.png', ''),
+ MAPPER_MDRAID_TYPE : ('icon_mapper_raid.png', 'icon_bd_raid.png', ''),
+ MAPPER_ATARAID_TYPE : ('icon_mapper_raid.png', 'icon_bd_raid.png', ''),
+ MAPPER_MULTIPATH_TYPE : ('icon_mapper_multipath.png', 'icon_bd_multipath.png', ''),
+ MAPPER_CRYPTO_TYPE : ('icon_mapper_crypto.png', 'icon_bd_crypto.png', ''),
+ MAPPER_iSCSI_TYPE : ('', 'icon_bd_net.png', '')}
+def get_mapper_icons(mapper_type):
+ try:
+ return MAPPER_ICONS[mapper_type]
+ except:
+ return ('', '', '')
+
+
+def get_fs_icon(fstype):
+ # all fss have the same icon
+ return 'icon_content_FS.png'
--- conga/luci/site/luci/Extensions/storage_adapters.py 2006/10/07 01:04:01 1.4
+++ conga/luci/site/luci/Extensions/storage_adapters.py 2006/10/09 17:01:19 1.5
@@ -166,9 +166,7 @@
return None
- buff = mapper_type
- if mapper_type in PRETTY_MAPPER_NAMES:
- buff = PRETTY_MAPPER_NAMES[mapper_type]
+ buff, dummy1, dummy2 = get_pretty_mapper_info(mapper_type)
pretty_names = buff + 's'
pretty_names_desc = 'Manage ' + buff + 's'
pretty_name = buff
@@ -291,11 +289,13 @@
### Hard Drives ###
+ hds_pretty_name, hd_pretty_name, dummy = get_pretty_mapper_info(MAPPER_SYS_TYPE)
+
hds_p = {}
- hds_p['Title'] = 'Hard Drives'
+ hds_p['Title'] = hds_pretty_name
hds_p['cfg_type'] = "nodes"
hds_p['absolute_url'] = url + '?' + PAGETYPE + '=' + VIEW_BDS + '&' + STONAME + '=' + hostname + '&' + PT_MAPPER_TYPE + '=' + MAPPER_SYS_TYPE + '&' + PT_MAPPER_ID + '=' + SYSTEM_PREFIX
- hds_p['Description'] = "Manage Hard Drives"
+ hds_p['Description'] = "Manage " + hds_pretty_name
if (pagetype == VIEW_BDS or pagetype == VIEW_BD) and mapper_type == MAPPER_SYS_TYPE:
hds_p['show_children'] = True
else:
@@ -316,7 +316,7 @@
hd['Title'] = hd_path.replace('/dev/', '')
hd['cfg_type'] = "nodes"
hd['absolute_url'] = url + '?' + PAGETYPE + '=' + VIEW_BD + '&' + STONAME + '=' + hostname + '&' + PT_MAPPER_TYPE + '=' + MAPPER_SYS_TYPE + '&' + PT_MAPPER_ID + '=' + sys_id + '&' + PT_PATH + '=' + hd_path
- hd['Description'] = 'Manage Hard Drive'
+ hd['Description'] = 'Manage ' + hd_pretty_name
hd['show_children'] = False
if pagetype == VIEW_BD and mapper_id == sys_id and path == hd_path:
next reply other threads:[~2006-10-09 17:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-09 17:01 kupcevic [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-10-16 19:49 [Cluster-devel] conga/luci/site/luci/Extensions StorageReport. rmccabe
2007-06-01 23:18 rmccabe
2007-09-24 19:48 rmccabe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061009170120.1461.qmail@sourceware.org \
--to=kupcevic@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).