cluster-devel.redhat.com archive mirror
 help / color / mirror / Atom feed
From: Jeff Layton <jlayton@redhat.com>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH v1 07/11] locks: only pull entries off of blocked_list when they are really unblocked
Date: Wed, 5 Jun 2013 07:38:22 -0400	[thread overview]
Message-ID: <20130605073822.4d67c57c@corrin.poochiereds.net> (raw)
In-Reply-To: <20130604215839.GD15594@fieldses.org>

On Tue, 4 Jun 2013 17:58:39 -0400
"J. Bruce Fields" <bfields@fieldses.org> wrote:

> On Fri, May 31, 2013 at 11:07:30PM -0400, Jeff Layton wrote:
> > Currently, when there is a lot of lock contention the kernel spends an
> > inordinate amount of time taking blocked locks off of the global
> > blocked_list and then putting them right back on again. When all of this
> > code was protected by a single lock, then it didn't matter much, but now
> > it means a lot of file_lock_lock thrashing.
> > 
> > Optimize this a bit by deferring the removal from the blocked_list until
> > we're either applying or cancelling the lock. By doing this, and using a
> > lockless list_empty check, we can avoid taking the file_lock_lock in
> > many cases.
> > 
> > Because the fl_link check is lockless, we must ensure that only the task
> > that "owns" the request manipulates the fl_link. Also, with this change,
> > it's possible that we'll see an entry on the blocked_list that has a
> > NULL fl_next pointer. In that event, just ignore it and continue walking
> > the list.
> 
> OK, that sounds safe as in it shouldn't crash, but does the deadlock
> detection still work, or can it miss loops?
> 
> Those locks that are temporarily NULL would previously not have been on
> the list at all, OK, but...  I'm having trouble reasoning about how this
> works now.
> 
> Previously a single lock was held interrupted across
> posix_locks_deadlock and locks_insert_block() which guaranteed we
> shouldn't be adding a loop, is that still true?
> 
> --b.
> 

I had thought it was when I originally looked at this, but now that I
consider it again I think you may be correct and that there are possible
races here. Since we might end up reblocking behind a different lock
without taking the global spinlock we could flip to blocking behind a
different lock such that a loop is created if you had a complex (>2)
chain of locks.

I think I'm going to have to drop this approach and instead make it so
that the deadlock detection and insertion into the global blocker
list/hash are atomic. Ditto for locks_wake_up_blocks on posix locks and
taking the entries off the list/hash.

Now that I look, I think that approach may actually improve performance
too since we'll be taking the global spinlock less than we would have,
but I'll need to test it out to know for sure.

> > 
> > Signed-off-by: Jeff Layton <jlayton@redhat.com>
> > ---
> >  fs/locks.c |   29 +++++++++++++++++++++++------
> >  1 files changed, 23 insertions(+), 6 deletions(-)
> > 
> > diff --git a/fs/locks.c b/fs/locks.c
> > index 055c06c..fc35b9e 100644
> > --- a/fs/locks.c
> > +++ b/fs/locks.c
> > @@ -520,7 +520,6 @@ locks_delete_global_locks(struct file_lock *waiter)
> >  static void __locks_delete_block(struct file_lock *waiter)
> >  {
> >  	list_del_init(&waiter->fl_block);
> > -	locks_delete_global_blocked(waiter);
> >  	waiter->fl_next = NULL;
> >  }
> >  
> > @@ -704,13 +703,16 @@ EXPORT_SYMBOL(posix_test_lock);
> >  /* Find a lock that the owner of the given block_fl is blocking on. */
> >  static struct file_lock *what_owner_is_waiting_for(struct file_lock *block_fl)
> >  {
> > -	struct file_lock *fl;
> > +	struct file_lock *fl, *ret = NULL;
> >  
> >  	list_for_each_entry(fl, &blocked_list, fl_link) {
> > -		if (posix_same_owner(fl, block_fl))
> > -			return fl->fl_next;
> > +		if (posix_same_owner(fl, block_fl)) {
> > +			ret = fl->fl_next;
> > +			if (likely(ret))
> > +				break;
> > +		}
> >  	}
> > -	return NULL;
> > +	return ret;
> >  }
> >  
> >  static int posix_locks_deadlock(struct file_lock *caller_fl,
> > @@ -865,7 +867,8 @@ static int __posix_lock_file(struct inode *inode, struct file_lock *request, str
> >  				goto out;
> >  			error = FILE_LOCK_DEFERRED;
> >  			locks_insert_block(fl, request);
> > -			locks_insert_global_blocked(request);
> > +			if (list_empty(&request->fl_link))
> > +				locks_insert_global_blocked(request);
> >  			goto out;
> >    		}
> >    	}
> > @@ -876,6 +879,16 @@ static int __posix_lock_file(struct inode *inode, struct file_lock *request, str
> >  		goto out;
> >  
> >  	/*
> > +	 * Now that we know the request is no longer blocked, we can take it
> > +	 * off the global list. Some callers send down partially initialized
> > +	 * requests, so we only do this if FL_SLEEP is set. Also, avoid taking
> > +	 * the lock if the list is empty, as that indicates a request that
> > +	 * never blocked.
> > +	 */
> > +	if ((request->fl_flags & FL_SLEEP) && !list_empty(&request->fl_link))
> > +		locks_delete_global_blocked(request);
> > +
> > +	/*
> >  	 * Find the first old lock with the same owner as the new lock.
> >  	 */
> >  	
> > @@ -1069,6 +1082,7 @@ int posix_lock_file_wait(struct file *filp, struct file_lock *fl)
> >  			continue;
> >  
> >  		locks_delete_block(fl);
> > +		locks_delete_global_blocked(fl);
> >  		break;
> >  	}
> >  	return error;
> > @@ -1147,6 +1161,7 @@ int locks_mandatory_area(int read_write, struct inode *inode,
> >  		}
> >  
> >  		locks_delete_block(&fl);
> > +		locks_delete_global_blocked(&fl);
> >  		break;
> >  	}
> >  
> > @@ -1859,6 +1874,7 @@ static int do_lock_file_wait(struct file *filp, unsigned int cmd,
> >  			continue;
> >  
> >  		locks_delete_block(fl);
> > +		locks_delete_global_blocked(fl);
> >  		break;
> >  	}
> >  
> > @@ -2160,6 +2176,7 @@ posix_unblock_lock(struct file *filp, struct file_lock *waiter)
> >  	else
> >  		status = -ENOENT;
> >  	spin_unlock(&inode->i_lock);
> > +	locks_delete_global_blocked(waiter);
> >  	return status;
> >  }
> >  
> > -- 
> > 1.7.1
> > 


-- 
Jeff Layton <jlayton@redhat.com>



  reply	other threads:[~2013-06-05 11:38 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-01  3:07 [Cluster-devel] [PATCH v1 00/11] locks: scalability improvements for file locking Jeff Layton
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 01/11] cifs: use posix_unblock_lock instead of locks_delete_block Jeff Layton
2013-06-03 21:53   ` J. Bruce Fields
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 02/11] locks: make generic_add_lease and generic_delete_lease static Jeff Layton
2013-06-03 21:53   ` J. Bruce Fields
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 03/11] locks: comment cleanups and clarifications Jeff Layton
2013-06-03 22:00   ` J. Bruce Fields
2013-06-04 11:09     ` Jeff Layton
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 04/11] locks: make "added" in __posix_lock_file a bool Jeff Layton
2013-06-04 20:17   ` J. Bruce Fields
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 05/11] locks: encapsulate the fl_link list handling Jeff Layton
2013-06-04 20:17   ` J. Bruce Fields
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 06/11] locks: convert to i_lock to protect i_flock list Jeff Layton
2013-06-04 21:22   ` J. Bruce Fields
2013-06-05  0:46     ` Jeff Layton
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 07/11] locks: only pull entries off of blocked_list when they are really unblocked Jeff Layton
2013-06-04 21:58   ` J. Bruce Fields
2013-06-05 11:38     ` Jeff Layton [this message]
2013-06-05 12:24       ` J. Bruce Fields
2013-06-05 12:38         ` Jeff Layton
2013-06-05 12:59           ` J. Bruce Fields
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 08/11] locks: convert fl_link to a hlist_node Jeff Layton
2013-06-04 21:59   ` J. Bruce Fields
2013-06-05 11:43     ` Jeff Layton
2013-06-05 12:46       ` J. Bruce Fields
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 09/11] locks: turn the blocked_list into a hashtable Jeff Layton
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 10/11] locks: add a new "lm_owner_key" lock operation Jeff Layton
2013-06-01  3:07 ` [Cluster-devel] [PATCH v1 11/11] locks: give the blocked_hash its own spinlock Jeff Layton
2013-06-04 14:19   ` Stefan Metzmacher
2013-06-04 14:39     ` Jeff Layton
2013-06-04 14:46     ` Christoph Hellwig
2013-06-04 14:53       ` J. Bruce Fields
2013-06-04 15:15         ` Jeff Layton
2013-06-04 14:56       ` Jeff Layton
2013-06-03 19:04 ` [Cluster-devel] [PATCH v1 00/11] locks: scalability improvements for file locking Davidlohr Bueso
2013-06-03 21:31 ` J. Bruce Fields
2013-06-04 10:54   ` Jeff Layton
2013-06-04 11:56     ` Jim Rees
2013-06-04 12:15       ` Jeff Layton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130605073822.4d67c57c@corrin.poochiereds.net \
    --to=jlayton@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).