From: Alexander Aring <aahringo@redhat.com>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH v5.19-rc1 1/7] fs: dlm: add notes for recovery and membership handling
Date: Fri, 10 Jun 2022 13:06:10 -0400 [thread overview]
Message-ID: <20220610170616.3480642-2-aahringo@redhat.com> (raw)
In-Reply-To: <20220610170616.3480642-1-aahringo@redhat.com>
This patch adds some comment sections to make aware that the ls_recover()
function should never fail before membership handling. Membership
handling means to add/remove nodes from the lockspace ls_nodes
attribute in dlm_recover_members().
This is because there are functionality like dlm_midcomms_add_member(),
dlm_midcomms_remove_member() or dlm_lsop_recover_slot() which should
always get aware of any join or leave of lockspace members. If we add a
e.g. dlm_locking_stopped() before dlm_recover_members() to check if the
recovery was interrupted and abort it we might skip to call
dlm_midcomms_add_member(), dlm_midcomms_remove_member() or
dlm_lsop_recover_slot().
A reason because the recovery is interrupted could be that the cluster
manager notified about a new configuration .e.g. members joined or
leaved. It is fine to interrupt or fail the recovery handling after
the mentioned handling of dlm_recover_members() but never before.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
---
fs/dlm/member.c | 6 +++++-
fs/dlm/recoverd.c | 4 ++++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 98084e0cfccf..7e5f5aefefb5 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -534,7 +534,11 @@ int dlm_recover_members(struct dlm_ls *ls, struct dlm_recover *rv, int *neg_out)
int i, error, neg = 0, low = -1;
/* previously removed members that we've not finished removing need to
- count as a negative change so the "neg" recovery steps will happen */
+ * count as a negative change so the "neg" recovery steps will happen
+ *
+ * This functionality must report all member changes to lsops or
+ * midcomms layer and must never return before.
+ */
list_for_each_entry(memb, &ls->ls_nodes_gone, list) {
log_rinfo(ls, "prev removed member %d", memb->nodeid);
diff --git a/fs/dlm/recoverd.c b/fs/dlm/recoverd.c
index a55dfce705dd..b5b519cde20b 100644
--- a/fs/dlm/recoverd.c
+++ b/fs/dlm/recoverd.c
@@ -70,6 +70,10 @@ static int ls_recover(struct dlm_ls *ls, struct dlm_recover *rv)
/*
* Add or remove nodes from the lockspace's ls_nodes list.
+ *
+ * Due the fact we must report all membership changes to lsops or
+ * midcomms layer it is not permitted to abort ls_recover() until
+ * this is done.
*/
error = dlm_recover_members(ls, rv, &neg);
--
2.31.1
next prev parent reply other threads:[~2022-06-10 17:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-10 17:06 [Cluster-devel] [PATCH v5.19-rc1 0/7] fs: dlm: recovery error handling Alexander Aring
2022-06-10 17:06 ` Alexander Aring [this message]
2022-06-10 17:06 ` [Cluster-devel] [PATCH v5.19-rc1 2/7] fs: dlm: call dlm_lsop_recover_prep once Alexander Aring
2022-06-10 17:06 ` [Cluster-devel] [PATCH v5.19-rc1 3/7] fs: dlm: let new_lockspace() wait until recovery Alexander Aring
2022-06-10 17:06 ` [Cluster-devel] [PATCH v5.19-rc1 4/7] fs: dlm: handle recovery result outside of ls_recover Alexander Aring
2022-06-10 17:06 ` [Cluster-devel] [PATCH v5.19-rc1 5/7] fs: dlm: handle recovery -EAGAIN case as retry Alexander Aring
2022-06-10 17:06 ` [Cluster-devel] [PATCH v5.19-rc1 6/7] fs: dlm: change -EINVAL recovery error to -EAGAIN Alexander Aring
2022-06-14 14:54 ` Alexander Aring
2022-06-10 17:06 ` [Cluster-devel] [PATCH v5.19-rc1 7/7] fs: dlm: add WARN_ON for non waiter case Alexander Aring
2022-06-14 17:59 ` Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220610170616.3480642-2-aahringo@redhat.com \
--to=aahringo@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).