From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryan O'Hara Date: Mon, 17 Sep 2007 11:25:29 -0500 Subject: [Cluster-devel] [PATCH] add format and filtering options to cman_tool Message-ID: <46EEAA79.6030309@redhat.com> List-Id: To: cluster-devel.redhat.com MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Below is a patch that will add the ability to filter the output of 'cman_tool nodes' by nodename, as well as specify the format of the output. Filtering by nodename is done via the -n option. Multiple nodes can be specified per usual. Formatting can be done via the -F option, where opt1, opt2, etc. can be one of four things: id, name, type, and addr. These will output the node id, node name, type, and address(es) for the node(s) respectively. Note that this is not a complete set of options as they correspond to information available from cman_tool, but it does achieve the goal. This is intended to give users a way to extract specific information about a node (or node), which might be useful for scripts, etc. Comments welcome. -Ryan -------------- next part -------------- A non-text attachment was scrubbed... Name: cman_tool.diff Type: text/x-patch Size: 6555 bytes Desc: not available URL: