From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio M. Di Nitto Date: Mon, 24 Jan 2011 14:31:30 +0100 Subject: [Cluster-devel] Eaton fence agent and more power devices support In-Reply-To: References: <4D382C10.4000506@redhat.com> <4D3D74E4.7000605@redhat.com> Message-ID: <4D3D7F32.9090902@redhat.com> List-Id: To: cluster-devel.redhat.com MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On 1/24/2011 2:19 PM, Arnaud Quette wrote: > Hi Fabio, > > 2011/1/24 Fabio M. Di Nitto > > > On 1/24/2011 1:18 PM, Arnaud Quette wrote: > > Hi Marek, > > > > 2011/1/20 Marek 'marx' Gr?c > > > > Hi, > > > > > > Arnaud Quette wrote: > > > > Hi Marek and the list, > > > > First of all, happy new year to you all: health, happiness and > > ... high availability ;-) > > > > I've just derived a fence_eaton_snmp script, based on > > fence_apc_snmp. > > You'll find attached the diff against the latest fence-agents > > repository. > > > > This has been tested with the suitable hardware (Eaton Managed > > ePDU): http://www.epdu.com > > Can you please merge this for the next cman releases. > > > > Finally, I was able to review your code. I have few minor > > suggestions how to make code be better but we can solve that > later. > > But I can do that later when we will have an access to this > device. > > Fence agent will be part of the next fence-agents package. > > > > > > excellent, thanks. > > Do you have any idea about the next official release date? > > It won?t be too long before I?ll cut another upstream release. I am > waiting for Marek to push some last fixes and we should be good to go. > > > perfect timing. > is an RPM update also scheduled? > Yes, they always come together. > > I'm still checking with Fabio to provide a suitable device for > Denmark. > > Ok perfect, let me know how the search goes. I sent the plug spec in > another email. Shouldn?t be too hard to get it. Worst case, send me > something that supports 220v/50hz and I?ll do some surgery on other > cables :) > > > well, the voltage and ouput plugs are not the issue. > but the input seems to be. I've just got in touch with our Danish > representative to finalize this. If it?s a problem, as long as voltage and output plugs do match, I can handmade a cable. Let?s not make it too complicated. > I should be able to send you an update around tomorrow. Ok perfect. thanks Fabio