From: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: ctalbott-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
rni-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
James Smart <james.smart-laKkSmNT4hbQT0dZR+AlfA@public.gmane.org>,
hughd-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
vgoyal-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Subject: [PATCH 04/10] block: drop custom queue draining used by scsi_transport_{iscsi|fc}
Date: Mon, 4 Jun 2012 20:40:54 -0700 [thread overview]
Message-ID: <1338867660-4689-5-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1338867660-4689-1-git-send-email-tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
iscsi_remove_host() uses bsg_remove_queue() which implements custom
queue draining. fc_bsg_remove() open-codes mostly identical logic.
The draining logic isn't correct in that blk_stop_queue() doesn't
prevent new requests from being queued - it just stops processing, so
nothing prevents new requests to be queued after the logic determines
that the queue is drained.
blk_cleanup_queue() now implements proper queue draining and these
custom draining logics aren't necessary. Drop them and use
bsg_unregister_queue() + blk_cleanup_queue() instead.
Signed-off-by: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Reviewed-by: Mike Christie <michaelc-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
Acked-by: Vivek Goyal <vgoyal-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: James Bottomley <James.Bottomley-d9PhHud1JfjCXq6kfMZ53/egYHeGw8Jk@public.gmane.org>
Cc: James Smart <james.smart-laKkSmNT4hbQT0dZR+AlfA@public.gmane.org>
---
block/bsg-lib.c | 53 -----------------------------------
drivers/scsi/scsi_transport_fc.c | 38 -------------------------
drivers/scsi/scsi_transport_iscsi.c | 2 +-
include/linux/bsg-lib.h | 1 -
4 files changed, 1 insertions(+), 93 deletions(-)
diff --git a/block/bsg-lib.c b/block/bsg-lib.c
index 7ad49c8..deee61f 100644
--- a/block/bsg-lib.c
+++ b/block/bsg-lib.c
@@ -243,56 +243,3 @@ int bsg_setup_queue(struct device *dev, struct request_queue *q,
return 0;
}
EXPORT_SYMBOL_GPL(bsg_setup_queue);
-
-/**
- * bsg_remove_queue - Deletes the bsg dev from the q
- * @q: the request_queue that is to be torn down.
- *
- * Notes:
- * Before unregistering the queue empty any requests that are blocked
- */
-void bsg_remove_queue(struct request_queue *q)
-{
- struct request *req; /* block request */
- int counts; /* totals for request_list count and starved */
-
- if (!q)
- return;
-
- /* Stop taking in new requests */
- spin_lock_irq(q->queue_lock);
- blk_stop_queue(q);
-
- /* drain all requests in the queue */
- while (1) {
- /* need the lock to fetch a request
- * this may fetch the same reqeust as the previous pass
- */
- req = blk_fetch_request(q);
- /* save requests in use and starved */
- counts = q->rq.count[0] + q->rq.count[1] +
- q->rq.starved[0] + q->rq.starved[1];
- spin_unlock_irq(q->queue_lock);
- /* any requests still outstanding? */
- if (counts == 0)
- break;
-
- /* This may be the same req as the previous iteration,
- * always send the blk_end_request_all after a prefetch.
- * It is not okay to not end the request because the
- * prefetch started the request.
- */
- if (req) {
- /* return -ENXIO to indicate that this queue is
- * going away
- */
- req->errors = -ENXIO;
- blk_end_request_all(req, -ENXIO);
- }
-
- msleep(200); /* allow bsg to possibly finish */
- spin_lock_irq(q->queue_lock);
- }
- bsg_unregister_queue(q);
-}
-EXPORT_SYMBOL_GPL(bsg_remove_queue);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 5797604..a9617ad 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -4130,45 +4130,7 @@ fc_bsg_rportadd(struct Scsi_Host *shost, struct fc_rport *rport)
static void
fc_bsg_remove(struct request_queue *q)
{
- struct request *req; /* block request */
- int counts; /* totals for request_list count and starved */
-
if (q) {
- /* Stop taking in new requests */
- spin_lock_irq(q->queue_lock);
- blk_stop_queue(q);
-
- /* drain all requests in the queue */
- while (1) {
- /* need the lock to fetch a request
- * this may fetch the same reqeust as the previous pass
- */
- req = blk_fetch_request(q);
- /* save requests in use and starved */
- counts = q->rq.count[0] + q->rq.count[1] +
- q->rq.starved[0] + q->rq.starved[1];
- spin_unlock_irq(q->queue_lock);
- /* any requests still outstanding? */
- if (counts == 0)
- break;
-
- /* This may be the same req as the previous iteration,
- * always send the blk_end_request_all after a prefetch.
- * It is not okay to not end the request because the
- * prefetch started the request.
- */
- if (req) {
- /* return -ENXIO to indicate that this queue is
- * going away
- */
- req->errors = -ENXIO;
- blk_end_request_all(req, -ENXIO);
- }
-
- msleep(200); /* allow bsg to possibly finish */
- spin_lock_irq(q->queue_lock);
- }
-
bsg_unregister_queue(q);
blk_cleanup_queue(q);
}
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 1cf640e..c737a16 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -575,7 +575,7 @@ static int iscsi_remove_host(struct transport_container *tc,
struct iscsi_cls_host *ihost = shost->shost_data;
if (ihost->bsg_q) {
- bsg_remove_queue(ihost->bsg_q);
+ bsg_unregister_queue(ihost->bsg_q);
blk_cleanup_queue(ihost->bsg_q);
}
return 0;
diff --git a/include/linux/bsg-lib.h b/include/linux/bsg-lib.h
index f55ab8c..4d0fb3d 100644
--- a/include/linux/bsg-lib.h
+++ b/include/linux/bsg-lib.h
@@ -67,7 +67,6 @@ void bsg_job_done(struct bsg_job *job, int result,
int bsg_setup_queue(struct device *dev, struct request_queue *q, char *name,
bsg_job_fn *job_fn, int dd_job_size);
void bsg_request_fn(struct request_queue *q);
-void bsg_remove_queue(struct request_queue *q);
void bsg_goose_queue(struct request_queue *q);
#endif
--
1.7.7.3
next prev parent reply other threads:[~2012-06-05 3:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-05 3:40 [PATCHSET] block: implement per-blkg request allocation, take#2 Tejun Heo
[not found] ` <1338867660-4689-1-git-send-email-tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2012-06-05 3:40 ` [PATCH 01/10] blkcg: __blkg_lookup_create() doesn't need radix preload Tejun Heo
2012-06-05 3:40 ` [PATCH 02/10] blkcg: make root blkcg allocation use %GFP_KERNEL Tejun Heo
2012-06-05 3:40 ` [PATCH 03/10] mempool: add @gfp_mask to mempool_create_node() Tejun Heo
2012-06-05 3:40 ` Tejun Heo [this message]
2012-06-05 3:40 ` [PATCH 05/10] block: refactor get_request[_wait]() Tejun Heo
2012-06-05 3:40 ` [PATCH 06/10] block: allocate io_context upfront Tejun Heo
2012-06-05 3:40 ` [PATCH 07/10] blkcg: inline bio_blkcg() and friends Tejun Heo
2012-06-05 3:40 ` [PATCH 08/10] block: add q->nr_rqs[] and move q->rq.elvpriv to q->nr_rqs_elvpriv Tejun Heo
2012-06-05 3:40 ` [PATCH 09/10] block: prepare for multiple request_lists Tejun Heo
2012-06-05 3:41 ` [PATCH 10/10] blkcg: implement per-blkg request allocation Tejun Heo
2012-06-18 22:34 ` [PATCHSET] block: implement per-blkg request allocation, take#2 Tejun Heo
[not found] ` <20120618223432.GF32733-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2012-06-25 9:55 ` Jens Axboe
[not found] ` <1338867660-4689-11-git-send-email-tj@kernel.org>
[not found] ` <1338867660-4689-11-git-send-email-tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2012-06-21 22:25 ` [PATCH UPDATED 10/10] blkcg: implement per-blkg request allocation Tejun Heo
2012-06-26 22:34 ` [PATCH UPDATED v4 " Tejun Heo
2012-06-26 22:48 ` [PATCH UPDATED v5 " Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2012-06-04 7:08 [PATCHSET] block: " Tejun Heo
[not found] ` <1338793697-10735-1-git-send-email-tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2012-06-04 7:08 ` [PATCH 04/10] block: drop custom queue draining used by scsi_transport_{iscsi|fc} Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338867660-4689-5-git-send-email-tj@kernel.org \
--to=tj-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org \
--cc=containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=ctalbott-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=hughd-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=james.smart-laKkSmNT4hbQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rni-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=vgoyal-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox