From: Sukadev Bhattiprolu <sukadev-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
To: Daniel Lezcano <dlezcano-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
Cc: Linux Containers
<containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org>,
Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Pavel Emelianov <xemul-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org>
Subject: Re: pidns memory leak
Date: Thu, 8 Oct 2009 20:29:28 -0700 [thread overview]
Message-ID: <20091009032928.GA2031@us.ibm.com> (raw)
In-Reply-To: <4ACD9ECC.90508-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
Daniel Lezcano [dlezcano-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org] wrote:
> Sukadev Bhattiprolu wrote:
>> Still digging through some traces, but below I have some questions that
>> I am still trying to answer.
>>
>>> I am not sure what you mean by 'struct pids' but what I observed is:
>>
>> Ok, I see that too. If pids leak, then pid-namespace will leak too.
>> Do you see any leaks in proc_inode_cache ?
>
> Yes, right. It leaks too.
Ok, some progress...
Can you please verify these observations:
- If the container exits normally, the leak does not seem to happen.
(i.e reduce your sleep 3600 to say sleep 3 and remove the lxc-stop).
- Revert the following commit and check if the leak happens:
commit 7766755a2f249e7e0dabc5255a0a3d151ff79821
Author: Andrea Arcangeli <andrea-l3A5Bk7waGM@public.gmane.org>
Date: Mon Feb 4 22:29:21 2008 -0800
(this commit added the check for PF_EXITING in proc_flush_task_mnt
loosely explained below).
Incomplete analysis :-)
If the container-init is terminated (by the lxc-stop), the container zaps
other processes in the container and waits for them. The leak happens in
this case.
Following sequence of events occur:
- container-init calls do_exit and sets PF_EXITING (in exit_signals())
- container init calls zaps_pid_ns_processes() (exit_notify /
forget_orignal_parent() / find_new_reaper())
- In zap_pid_ns_processes() container-init sends SIGKILL to
descendants and calls sys_wait().
- The sys_wait() is expected to call release_task() which calls
proc_flush_task_mnt().
- proc_flush_task_mnt() looks up the dentry for the pid (2 in
our example) and finds the dentry.
But since container-init is itself exiting (i.e PF_EXITING is
set) it does NOT call the shrink_dcache_parent(), but,
interestingly calls d_drop() and dput().
Now the d_drop() unhashes the dentry for the pid 2.
- proc_flush_task_mnt() then tries to find the dentry for the
tgid of the process. In our case, the tgid == pid == 2 and
we just unhashed the dentry for "2".
So, we don't find the dentry for the leader either (and hence
don't make the second shrink_dcache_parent() call in
proc_flush_task_mnt() either).
Without a call to shrink_dcache_parent(), the proc inode
for the process that was terminated by container init is
not deleted (i.e we don't call proc_delete_inode() or
the put_pid() inside it) causing us to leak proc_inodes,
struct pid and hence struct pid_namespace.
There should be a better fix, but first please confirm if reverting the
above commit fixes the leak for you also.
Sukadev
next prev parent reply other threads:[~2009-10-09 3:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-02 12:27 pidns memory leak Daniel Lezcano
[not found] ` <4AC5F198.2070407-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
2009-10-06 4:05 ` Sukadev Bhattiprolu
[not found] ` <20091006040526.GA22923-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-10-06 8:18 ` Daniel Lezcano
[not found] ` <4ACAFD6A.3060008-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
2009-10-08 3:08 ` Sukadev Bhattiprolu
[not found] ` <20091008030828.GA18973-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-10-08 8:11 ` Daniel Lezcano
[not found] ` <4ACD9ECC.90508-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
2009-10-09 3:29 ` Sukadev Bhattiprolu [this message]
[not found] ` <20091009032928.GA2031-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-10-09 13:18 ` Daniel Lezcano
[not found] ` <4ACF381F.9050808-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
2009-10-09 20:38 ` Sukadev Bhattiprolu
[not found] ` <20091009203809.GA12230-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-10-09 20:50 ` Eric W. Biederman
[not found] ` <m18wfkl2bf.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
2009-10-10 1:58 ` Sukadev Bhattiprolu
[not found] ` <20091010015859.GB11904-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-10-10 2:08 ` Eric W. Biederman
2009-10-09 21:54 ` Matt Helsley
2009-10-10 1:32 ` Sukadev Bhattiprolu
[not found] ` <20091010013235.GA11904-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-10-12 8:41 ` Daniel Lezcano
[not found] ` <4AD2EBC7.2020109-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
2009-10-14 6:15 ` Sukadev Bhattiprolu
[not found] ` <20091014061533.GA23569-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2009-11-02 21:33 ` Andrew Morton
2009-11-02 22:38 ` Serge E. Hallyn
2009-11-02 22:47 ` Andrew Morton
2009-11-03 7:24 ` Cedric Le Goater
2009-11-03 8:41 ` Eric W. Biederman
2009-11-03 9:24 ` Cedric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091009032928.GA2031@us.ibm.com \
--to=sukadev-23vcf4htsmix0ybbhkvfkdbpr1lh4cv8@public.gmane.org \
--cc=containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org \
--cc=dlezcano-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=xemul-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox