From: Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
To: YAMAMOTO Takashi <yamamoto-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org>
Cc: containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org,
minoura-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org
Subject: Re: [PATCH] memory.swappiness
Date: Mon, 03 Dec 2007 08:55:30 +0530 [thread overview]
Message-ID: <4753772A.2070609@linux.vnet.ibm.com> (raw)
In-Reply-To: <20071203025416.A55761D08F0-Pcsii4f/SVk@public.gmane.org>
YAMAMOTO Takashi wrote:
> here's a trivial patch to implement memory.swappiness,
> which controls swappiness for cgroup memory reclamation.
>
> it's against 2.6.24-rc3-mm2.
>
> YAMAMOTO Takashi
>
>
> Signed-off-by: YAMAMOTO Takashi <yamamoto-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org>
> ---
>
> --- linux-2.6.24-rc3-mm2-swappiness/include/linux/memcontrol.h.BACKUP 2007-12-03 11:49:27.176669111 +0900
> +++ linux-2.6.24-rc3-mm2-swappiness/include/linux/memcontrol.h 2007-12-03 10:00:29.049448425 +0900
> @@ -46,6 +46,7 @@ extern void mem_cgroup_out_of_memory(str
> extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
> gfp_t gfp_mask);
> int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
> +extern int mem_cgroup_swappiness(struct mem_cgroup *mem);
>
> static inline struct mem_cgroup *mm_cgroup(const struct mm_struct *mm)
> {
> --- linux-2.6.24-rc3-mm2-swappiness/mm/vmscan.c.BACKUP 2007-12-03 07:49:00.000000000 +0900
> +++ linux-2.6.24-rc3-mm2-swappiness/mm/vmscan.c 2007-12-03 10:01:57.559803379 +0900
> @@ -1030,7 +1030,7 @@ static int calc_reclaim_mapped(struct sc
> *
> * Max temporary value is vm_total_pages*100.
> */
> - imbalance *= (vm_swappiness + 1);
> + imbalance *= (sc->swappiness + 1);
> imbalance /= 100;
>
> /*
> @@ -1445,7 +1445,7 @@ unsigned long try_to_free_mem_cgroup_pag
> .may_writepage = !laptop_mode,
> .may_swap = 1,
> .swap_cluster_max = SWAP_CLUSTER_MAX,
> - .swappiness = vm_swappiness,
> + .swappiness = mem_cgroup_swappiness(mem_cont),
> .order = 0,
> .mem_cgroup = mem_cont,
> .isolate_pages = mem_cgroup_isolate_pages,
> --- linux-2.6.24-rc3-mm2-swappiness/mm/memcontrol.c.BACKUP 2007-12-03 07:49:00.000000000 +0900
> +++ linux-2.6.24-rc3-mm2-swappiness/mm/memcontrol.c 2007-12-03 11:22:40.157163781 +0900
> @@ -133,6 +133,7 @@ struct mem_cgroup {
>
> unsigned long control_type; /* control RSS or RSS+Pagecache */
> int prev_priority; /* for recording reclaim priority */
> + unsigned int swappiness; /* swappiness */
> /*
> * statistics.
> */
> @@ -1077,7 +1078,23 @@ static int mem_control_stat_open(struct
> return single_open(file, mem_control_stat_show, cont);
> }
>
> +static int mem_cgroup_swappiness_write(struct cgroup *cont, struct cftype *cft,
> + u64 val)
> +{
> + struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
> +
> + if (val > 100)
> + return -EINVAL;
> + mem->swappiness = val;
> + return 0;
> +}
> +
> +static u64 mem_cgroup_swappiness_read(struct cgroup *cont, struct cftype *cft)
> +{
> + struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
>
> + return mem->swappiness;
> +}
>
> static struct cftype mem_cgroup_files[] = {
> {
> @@ -1110,8 +1127,21 @@ static struct cftype mem_cgroup_files[]
> .name = "stat",
> .open = mem_control_stat_open,
> },
> + {
> + .name = "swappiness",
> + .write_uint = mem_cgroup_swappiness_write,
> + .read_uint = mem_cgroup_swappiness_read,
> + },
> };
>
> +/* XXX probably it's better to move try_to_free_mem_cgroup_pages to
> + memcontrol.c and kill this */
> +int mem_cgroup_swappiness(struct mem_cgroup *mem)
> +{
> +
> + return mem->swappiness;
> +}
> +
> static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
> {
> struct mem_cgroup_per_node *pn;
> @@ -1155,6 +1185,8 @@ mem_cgroup_create(struct cgroup_subsys *
> res_counter_init(&mem->res);
>
> mem->control_type = MEM_CGROUP_TYPE_ALL;
> + mem->swappiness = 60; /* XXX probably should inherit a value from
> + either parent cgroup or global vm_swappiness */
I prefer inheriting from the parent, but since our hierarchy support
needs work (changes to res_counter to support actual hierarchies), I
would prefer using global vm_swappiness.
> memset(&mem->info, 0, sizeof(mem->info));
>
> for_each_node_state(node, N_POSSIBLE)
I like this patch very much
Acked-by: Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
--
Warm Regards,
Balbir Singh
Linux Technology Center
IBM, ISTL
prev parent reply other threads:[~2007-12-03 3:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-03 2:54 [PATCH] memory.swappiness YAMAMOTO Takashi
[not found] ` <20071203025416.A55761D08F0-Pcsii4f/SVk@public.gmane.org>
2007-12-03 3:25 ` Balbir Singh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4753772A.2070609@linux.vnet.ibm.com \
--to=balbir-23vcf4htsmix0ybbhkvfkdbpr1lh4cv8@public.gmane.org \
--cc=containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org \
--cc=minoura-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org \
--cc=yamamoto-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox