* Re: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties
2013-11-12 19:46 ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
@ 2013-11-14 13:17 ` Eduardo Valentin
2013-11-14 22:04 ` Rafael J. Wysocki
2013-11-15 4:41 ` viresh kumar
2014-01-12 14:31 ` Zhang, Rui
2 siblings, 1 reply; 7+ messages in thread
From: Eduardo Valentin @ 2013-11-14 13:17 UTC (permalink / raw)
To: Eduardo Valentin, Rafael J. Wysocki
Cc: swarren, pawel.moll, mark.rutland, ian.campbell, rob.herring,
linux, rui.zhang, wni, grant.likely, durgadoss.r, linux-pm,
devicetree, lm-sensors, linux-kernel, Viresh Kumar, cpufreq,
devicetree-discuss
[-- Attachment #1: Type: text/plain, Size: 5037 bytes --]
On 12-11-2013 15:46, Eduardo Valentin wrote:
> This patch changes the cpufreq-cpu0 driver to consider if
> a cpu needs cooling (with cpufreq). In case the cooling is needed,
> the cpu0 device tree node needs to be properly configured
> with cooling device properties.
>
> In case these properties are present,, the driver will
> load a cpufreq cooling device in the system. The cpufreq-cpu0
> driver is not interested in determining how the system should
> be using the cooling device. The driver is responsible
> only of loading the cooling device.
>
> Describing how the cooling device will be used can be
> accomplished by setting up a thermal zone that references
> and is composed by the cpufreq cooling device.
>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Rafael, Can I still assume you are OK with this patch and add your
acked-by [1]?
http://www.spinics.net/lists/lm-sensors/msg39136.html
It has changed a few bits from V1 to here. The idea is still same though.
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: cpufreq@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 7 +++++++
> drivers/cpufreq/Kconfig | 2 +-
> drivers/cpufreq/cpufreq-cpu0.c | 16 ++++++++++++++++
> 3 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> index 051f764..f055515 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> @@ -15,6 +15,10 @@ Optional properties:
> - clock-latency: Specify the possible maximum transition latency for clock,
> in unit of nanoseconds.
> - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
> +- #cooling-cells:
> +- cooling-min-level:
> +- cooling-max-level:
> + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
>
> Examples:
>
> @@ -33,6 +37,9 @@ cpus {
> 198000 850000
> >;
> clock-latency = <61036>; /* two CLK32 periods */
> + #cooling-cells = <2>;
> + cooling-min-level = <0>;
> + cooling-max-level = <2>;
> };
>
> cpu@1 {
> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> index 534fcb8..fc1e9a5 100644
> --- a/drivers/cpufreq/Kconfig
> +++ b/drivers/cpufreq/Kconfig
> @@ -186,7 +186,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
>
> config GENERIC_CPUFREQ_CPU0
> tristate "Generic CPU0 cpufreq driver"
> - depends on HAVE_CLK && REGULATOR && PM_OPP && OF
> + depends on HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL
> select CPU_FREQ_TABLE
> help
> This adds a generic cpufreq driver for CPU0 frequency management.
> diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
> index c522a95..568aaf3 100644
> --- a/drivers/cpufreq/cpufreq-cpu0.c
> +++ b/drivers/cpufreq/cpufreq-cpu0.c
> @@ -13,7 +13,9 @@
>
> #include <linux/clk.h>
> #include <linux/cpu.h>
> +#include <linux/cpu_cooling.h>
> #include <linux/cpufreq.h>
> +#include <linux/cpumask.h>
> #include <linux/err.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -21,6 +23,7 @@
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> +#include <linux/thermal.h>
>
> static unsigned int transition_latency;
> static unsigned int voltage_tolerance; /* in percentage */
> @@ -29,6 +32,7 @@ static struct device *cpu_dev;
> static struct clk *cpu_clk;
> static struct regulator *cpu_reg;
> static struct cpufreq_frequency_table *freq_table;
> +static struct thermal_cooling_device *cdev;
>
> static int cpu0_verify_speed(struct cpufreq_policy *policy)
> {
> @@ -260,6 +264,17 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
> goto out_free_table;
> }
>
> + /*
> + * For now, just loading the cooling device;
> + * thermal DT code takes care of matching them.
> + */
> + if (of_find_property(np, "#cooling-cells", NULL)) {
> + cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
> + if (IS_ERR(cdev))
> + pr_err("running cpufreq without cooling device: %ld\n",
> + PTR_ERR(cdev));
> + }
> +
> of_node_put(np);
> return 0;
>
> @@ -272,6 +287,7 @@ out_put_node:
>
> static int cpu0_cpufreq_remove(struct platform_device *pdev)
> {
> + cpufreq_cooling_unregister(cdev);
> cpufreq_unregister_driver(&cpu0_cpufreq_driver);
> opp_free_cpufreq_table(cpu_dev, &freq_table);
>
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties
2013-11-14 13:17 ` Eduardo Valentin
@ 2013-11-14 22:04 ` Rafael J. Wysocki
0 siblings, 0 replies; 7+ messages in thread
From: Rafael J. Wysocki @ 2013-11-14 22:04 UTC (permalink / raw)
To: Eduardo Valentin
Cc: swarren, pawel.moll, mark.rutland, ian.campbell, rob.herring,
linux, rui.zhang, wni, grant.likely, durgadoss.r, linux-pm,
devicetree, lm-sensors, linux-kernel, Viresh Kumar, cpufreq,
devicetree-discuss
On Thursday, November 14, 2013 09:17:21 AM Eduardo Valentin wrote:
> On 12-11-2013 15:46, Eduardo Valentin wrote:
> > This patch changes the cpufreq-cpu0 driver to consider if
> > a cpu needs cooling (with cpufreq). In case the cooling is needed,
> > the cpu0 device tree node needs to be properly configured
> > with cooling device properties.
> >
> > In case these properties are present,, the driver will
> > load a cpufreq cooling device in the system. The cpufreq-cpu0
> > driver is not interested in determining how the system should
> > be using the cooling device. The driver is responsible
> > only of loading the cooling device.
> >
> > Describing how the cooling device will be used can be
> > accomplished by setting up a thermal zone that references
> > and is composed by the cpufreq cooling device.
> >
> > Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
>
> Rafael, Can I still assume you are OK with this patch and add your
> acked-by [1]?
> http://www.spinics.net/lists/lm-sensors/msg39136.html
>
> It has changed a few bits from V1 to here. The idea is still same though.
Well, this is fine by me, personally, but I'd like someone from the ARM camp to
ACK this to be honest.
Thanks!
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>
> > Cc: Grant Likely <grant.likely@linaro.org>
> > Cc: Rob Herring <rob.herring@calxeda.com>
> > Cc: cpufreq@vger.kernel.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: devicetree-discuss@lists.ozlabs.org
> > Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> > ---
> > .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 7 +++++++
> > drivers/cpufreq/Kconfig | 2 +-
> > drivers/cpufreq/cpufreq-cpu0.c | 16 ++++++++++++++++
> > 3 files changed, 24 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> > index 051f764..f055515 100644
> > --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> > @@ -15,6 +15,10 @@ Optional properties:
> > - clock-latency: Specify the possible maximum transition latency for clock,
> > in unit of nanoseconds.
> > - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
> > +- #cooling-cells:
> > +- cooling-min-level:
> > +- cooling-max-level:
> > + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
> >
> > Examples:
> >
> > @@ -33,6 +37,9 @@ cpus {
> > 198000 850000
> > >;
> > clock-latency = <61036>; /* two CLK32 periods */
> > + #cooling-cells = <2>;
> > + cooling-min-level = <0>;
> > + cooling-max-level = <2>;
> > };
> >
> > cpu@1 {
> > diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> > index 534fcb8..fc1e9a5 100644
> > --- a/drivers/cpufreq/Kconfig
> > +++ b/drivers/cpufreq/Kconfig
> > @@ -186,7 +186,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
> >
> > config GENERIC_CPUFREQ_CPU0
> > tristate "Generic CPU0 cpufreq driver"
> > - depends on HAVE_CLK && REGULATOR && PM_OPP && OF
> > + depends on HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL
> > select CPU_FREQ_TABLE
> > help
> > This adds a generic cpufreq driver for CPU0 frequency management.
> > diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
> > index c522a95..568aaf3 100644
> > --- a/drivers/cpufreq/cpufreq-cpu0.c
> > +++ b/drivers/cpufreq/cpufreq-cpu0.c
> > @@ -13,7 +13,9 @@
> >
> > #include <linux/clk.h>
> > #include <linux/cpu.h>
> > +#include <linux/cpu_cooling.h>
> > #include <linux/cpufreq.h>
> > +#include <linux/cpumask.h>
> > #include <linux/err.h>
> > #include <linux/module.h>
> > #include <linux/of.h>
> > @@ -21,6 +23,7 @@
> > #include <linux/platform_device.h>
> > #include <linux/regulator/consumer.h>
> > #include <linux/slab.h>
> > +#include <linux/thermal.h>
> >
> > static unsigned int transition_latency;
> > static unsigned int voltage_tolerance; /* in percentage */
> > @@ -29,6 +32,7 @@ static struct device *cpu_dev;
> > static struct clk *cpu_clk;
> > static struct regulator *cpu_reg;
> > static struct cpufreq_frequency_table *freq_table;
> > +static struct thermal_cooling_device *cdev;
> >
> > static int cpu0_verify_speed(struct cpufreq_policy *policy)
> > {
> > @@ -260,6 +264,17 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
> > goto out_free_table;
> > }
> >
> > + /*
> > + * For now, just loading the cooling device;
> > + * thermal DT code takes care of matching them.
> > + */
> > + if (of_find_property(np, "#cooling-cells", NULL)) {
> > + cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
> > + if (IS_ERR(cdev))
> > + pr_err("running cpufreq without cooling device: %ld\n",
> > + PTR_ERR(cdev));
> > + }
> > +
> > of_node_put(np);
> > return 0;
> >
> > @@ -272,6 +287,7 @@ out_put_node:
> >
> > static int cpu0_cpufreq_remove(struct platform_device *pdev)
> > {
> > + cpufreq_cooling_unregister(cdev);
> > cpufreq_unregister_driver(&cpu0_cpufreq_driver);
> > opp_free_cpufreq_table(cpu_dev, &freq_table);
> >
> >
>
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties
2013-11-12 19:46 ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-11-14 13:17 ` Eduardo Valentin
@ 2013-11-15 4:41 ` viresh kumar
2014-01-12 14:31 ` Zhang, Rui
2 siblings, 0 replies; 7+ messages in thread
From: viresh kumar @ 2013-11-15 4:41 UTC (permalink / raw)
To: Eduardo Valentin, swarren, pawel.moll, mark.rutland, ian.campbell,
rob.herring, linux, rui.zhang
Cc: wni, grant.likely, durgadoss.r, linux-pm, devicetree, lm-sensors,
linux-kernel, Rafael J. Wysocki, cpufreq, devicetree-discuss
On Wednesday 13 November 2013 01:16 AM, Eduardo Valentin wrote:
> This patch changes the cpufreq-cpu0 driver to consider if
> a cpu needs cooling (with cpufreq). In case the cooling is needed,
> the cpu0 device tree node needs to be properly configured
> with cooling device properties.
>
> In case these properties are present,, the driver will
> load a cpufreq cooling device in the system. The cpufreq-cpu0
> driver is not interested in determining how the system should
> be using the cooling device. The driver is responsible
> only of loading the cooling device.
>
> Describing how the cooling device will be used can be
> accomplished by setting up a thermal zone that references
> and is composed by the cpufreq cooling device.
>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: cpufreq@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 7 +++++++
> drivers/cpufreq/Kconfig | 2 +-
> drivers/cpufreq/cpufreq-cpu0.c | 16 ++++++++++++++++
> 3 files changed, 24 insertions(+), 1 deletion(-)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties
2013-11-12 19:46 ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-11-14 13:17 ` Eduardo Valentin
2013-11-15 4:41 ` viresh kumar
@ 2014-01-12 14:31 ` Zhang, Rui
2014-01-13 15:08 ` Eduardo Valentin
2014-01-14 19:07 ` Eduardo Valentin
2 siblings, 2 replies; 7+ messages in thread
From: Zhang, Rui @ 2014-01-12 14:31 UTC (permalink / raw)
To: Eduardo Valentin, swarren@wwwdotorg.org, pawel.moll@arm.com,
mark.rutland@arm.com, ian.campbell@citrix.com,
rob.herring@calxeda.com, linux@roeck-us.net
Cc: wni@nvidia.com, grant.likely@linaro.org, R, Durgadoss,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
Rafael J. Wysocki, Viresh Kumar, cpufreq@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org
> -----Original Message-----
> From: Eduardo Valentin [mailto:eduardo.valentin@ti.com]
> Sent: Wednesday, November 13, 2013 3:46 AM
> To: swarren@wwwdotorg.org; pawel.moll@arm.com; mark.rutland@arm.com;
> ian.campbell@citrix.com; rob.herring@calxeda.com; linux@roeck-us.net;
> Zhang, Rui
> Cc: wni@nvidia.com; grant.likely@linaro.org; R, Durgadoss; linux-
> pm@vger.kernel.org; devicetree@vger.kernel.org; lm-sensors@lm-
> sensors.org; linux-kernel@vger.kernel.org; Eduardo Valentin; Rafael J.
> Wysocki; Viresh Kumar; cpufreq@vger.kernel.org; devicetree-
> discuss@lists.ozlabs.org
> Subject: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for
> cooling device properties
> Importance: High
>
> This patch changes the cpufreq-cpu0 driver to consider if a cpu needs
> cooling (with cpufreq). In case the cooling is needed, the cpu0 device
> tree node needs to be properly configured with cooling device
> properties.
>
> In case these properties are present,, the driver will load a cpufreq
> cooling device in the system. The cpufreq-cpu0 driver is not interested
> in determining how the system should be using the cooling device. The
> driver is responsible only of loading the cooling device.
>
> Describing how the cooling device will be used can be accomplished by
> setting up a thermal zone that references and is composed by the
> cpufreq cooling device.
>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: cpufreq@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 7 +++++++
> drivers/cpufreq/Kconfig | 2 +-
> drivers/cpufreq/cpufreq-cpu0.c | 16
> ++++++++++++++++
> 3 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> index 051f764..f055515 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> @@ -15,6 +15,10 @@ Optional properties:
> - clock-latency: Specify the possible maximum transition latency for
> clock,
> in unit of nanoseconds.
> - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
> +- #cooling-cells:
> +- cooling-min-level:
> +- cooling-max-level:
> + Please refer to
> Documentation/devicetree/bindings/thermal/thermal.txt.
>
> Examples:
>
> @@ -33,6 +37,9 @@ cpus {
> 198000 850000
> >;
> clock-latency = <61036>; /* two CLK32 periods */
> + #cooling-cells = <2>;
> + cooling-min-level = <0>;
> + cooling-max-level = <2>;
> };
>
> cpu@1 {
> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index
> 534fcb8..fc1e9a5 100644
> --- a/drivers/cpufreq/Kconfig
> +++ b/drivers/cpufreq/Kconfig
> @@ -186,7 +186,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
>
> config GENERIC_CPUFREQ_CPU0
> tristate "Generic CPU0 cpufreq driver"
> - depends on HAVE_CLK && REGULATOR && PM_OPP && OF
> + depends on HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL &&
> +CPU_THERMAL
config: make ARCH=arm multi_v7_defconfig
All warnings:
warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which
has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ &&
HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL)
I think you need to select THERMAL and CPU_THERMAL instead, right?
Thanks,
rui
> select CPU_FREQ_TABLE
> help
> This adds a generic cpufreq driver for CPU0 frequency
> management.
> diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-
> cpu0.c index c522a95..568aaf3 100644
> --- a/drivers/cpufreq/cpufreq-cpu0.c
> +++ b/drivers/cpufreq/cpufreq-cpu0.c
> @@ -13,7 +13,9 @@
>
> #include <linux/clk.h>
> #include <linux/cpu.h>
> +#include <linux/cpu_cooling.h>
> #include <linux/cpufreq.h>
> +#include <linux/cpumask.h>
> #include <linux/err.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -21,6 +23,7 @@
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> +#include <linux/thermal.h>
>
> static unsigned int transition_latency; static unsigned int
> voltage_tolerance; /* in percentage */ @@ -29,6 +32,7 @@ static struct
> device *cpu_dev; static struct clk *cpu_clk; static struct regulator
> *cpu_reg; static struct cpufreq_frequency_table *freq_table;
> +static struct thermal_cooling_device *cdev;
>
> static int cpu0_verify_speed(struct cpufreq_policy *policy) { @@ -
> 260,6 +264,17 @@ static int cpu0_cpufreq_probe(struct platform_device
> *pdev)
> goto out_free_table;
> }
>
> + /*
> + * For now, just loading the cooling device;
> + * thermal DT code takes care of matching them.
> + */
> + if (of_find_property(np, "#cooling-cells", NULL)) {
> + cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
> + if (IS_ERR(cdev))
> + pr_err("running cpufreq without cooling
> device: %ld\n",
> + PTR_ERR(cdev));
> + }
> +
> of_node_put(np);
> return 0;
>
> @@ -272,6 +287,7 @@ out_put_node:
>
> static int cpu0_cpufreq_remove(struct platform_device *pdev) {
> + cpufreq_cooling_unregister(cdev);
> cpufreq_unregister_driver(&cpu0_cpufreq_driver);
> opp_free_cpufreq_table(cpu_dev, &freq_table);
>
> --
> 1.8.2.1.342.gfa7285d
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties
2014-01-12 14:31 ` Zhang, Rui
@ 2014-01-13 15:08 ` Eduardo Valentin
2014-01-14 19:07 ` Eduardo Valentin
1 sibling, 0 replies; 7+ messages in thread
From: Eduardo Valentin @ 2014-01-13 15:08 UTC (permalink / raw)
To: Zhang, Rui
Cc: Eduardo Valentin, swarren@wwwdotorg.org, pawel.moll@arm.com,
mark.rutland@arm.com, ian.campbell@citrix.com,
rob.herring@calxeda.com, linux@roeck-us.net, wni@nvidia.com,
grant.likely@linaro.org, R, Durgadoss, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, Rafael J. Wysocki, Viresh Kumar,
cpufreq@vger.kernel.org,
"devicetree-discuss@lists.ozlabs.org" <devicetree-discu>
[-- Attachment #1: Type: text/plain, Size: 881 bytes --]
On 12-01-2014 10:31, Zhang, Rui wrote:
>> +++ b/drivers/cpufreq/Kconfig
>> > @@ -186,7 +186,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
>> >
>> > config GENERIC_CPUFREQ_CPU0
>> > tristate "Generic CPU0 cpufreq driver"
>> > - depends on HAVE_CLK && REGULATOR && PM_OPP && OF
>> > + depends on HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL &&
>> > +CPU_THERMAL
> config: make ARCH=arm multi_v7_defconfig
> All warnings:
> warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which
> has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ &&
> HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL)
>
> I think you need to select THERMAL and CPU_THERMAL instead, right?
>
Yeah, I think that would be better. I will send you a fix for that.
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties
2014-01-12 14:31 ` Zhang, Rui
2014-01-13 15:08 ` Eduardo Valentin
@ 2014-01-14 19:07 ` Eduardo Valentin
1 sibling, 0 replies; 7+ messages in thread
From: Eduardo Valentin @ 2014-01-14 19:07 UTC (permalink / raw)
To: Zhang, Rui
Cc: Eduardo Valentin, swarren@wwwdotorg.org, pawel.moll@arm.com,
mark.rutland@arm.com, ian.campbell@citrix.com,
rob.herring@calxeda.com, linux@roeck-us.net, wni@nvidia.com,
grant.likely@linaro.org, R, Durgadoss, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, Rafael J. Wysocki, Viresh Kumar,
cpufreq@vger.kernel.org,
"devicetree-discuss@lists.ozlabs.org" <devicetree-discu>
[-- Attachment #1: Type: text/plain, Size: 543 bytes --]
On 12-01-2014 10:31, Zhang, Rui wrote:
> config: make ARCH=arm multi_v7_defconfig
> All warnings:
> warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which
> has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ &&
> HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL)
Rui,
BTW, I am not able to reproduce the above warning :-(
Are you sure you simply do a
$ make ARCH=arm multi_v7_defconfig
??
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread