From: Thomas Abraham <ta.omasab@gmail.com>
To: cpufreq@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: mturquette@linaro.org, shawn.guo@linaro.org,
devicetree@vger.kernel.org, rjw@rjwysocki.net,
linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
t.figa@samsung.com, l.majewski@samsung.com,
viresh.kumar@linaro.org, heiko@sntech.de, thomas.ab@samsung.com
Subject: [PATCH v4 6/8] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data
Date: Wed, 14 May 2014 06:41:14 +0530 [thread overview]
Message-ID: <1400029876-5830-7-git-send-email-thomas.ab@samsung.com> (raw)
In-Reply-To: <1400029876-5830-1-git-send-email-thomas.ab@samsung.com>
From: Thomas Abraham <thomas.ab@samsung.com>
For all Exynos based platforms, add CPU nodes, operating points and cpu
clock data for migrating from Exynos specific cpufreq driver to using
generic cpufreq-cpu0 driver.
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 6 +++
arch/arm/boot/dts/exynos4210-trats.dts | 6 +++
arch/arm/boot/dts/exynos4210-universal_c210.dts | 6 +++
arch/arm/boot/dts/exynos4210.dtsi | 35 +++++++++++++++++++
arch/arm/boot/dts/exynos4212.dtsi | 18 ++++++++++
arch/arm/boot/dts/exynos4412-odroidx.dts | 6 +++
arch/arm/boot/dts/exynos4412-origen.dts | 6 +++
arch/arm/boot/dts/exynos4412-trats2.dts | 6 +++
arch/arm/boot/dts/exynos4412.dtsi | 31 +++++++++++++++++
arch/arm/boot/dts/exynos4x12.dtsi | 36 ++++++++++++++++++++
arch/arm/boot/dts/exynos5250-arndale.dts | 6 +++
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 6 +++
arch/arm/boot/dts/exynos5250.dtsi | 41 +++++++++++++++++++++++
14 files changed, 215 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 72fb11f..4324b25 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -32,6 +32,12 @@
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck1_reg>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 63aa2bb..7cc0a57 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -30,6 +30,12 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
+ cpus {
+ cpu: cpu@0 {
+ cpu0-supply = <&varm_breg>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 63e34b2..844f3fb 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -28,6 +28,12 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
};
+ cpus {
+ cpu: cpu@0 {
+ cpu0-supply = <&vdd_arm_reg>;
+ };
+ };
+
mct@10050000 {
compatible = "none";
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cacf614..22b967d 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -36,6 +36,33 @@
reg = <0x10023CA0 0x20>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+
+ operating-points = <
+ 1200000 1250000
+ 1000000 1150000
+ 800000 1075000
+ 500000 975000
+ 400000 975000
+ 200000 950000
+ >;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
gic: interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
@@ -73,6 +100,14 @@
compatible = "samsung,exynos4210-clock";
reg = <0x10030000 0x20000>;
#clock-cells = <1>;
+
+ samsung,armclk-cells = <9>;
+ samsung,armclk-divider-table = <1200000 3 7 3 4 1 7 5 0>,
+ <1000000 3 7 3 4 1 7 4 0>,
+ < 800000 3 7 3 3 1 7 3 0>,
+ < 500000 3 7 3 3 1 7 3 0>,
+ < 400000 3 7 3 3 1 7 3 0>,
+ < 200000 1 3 1 1 1 0 3 0>;
};
pmu {
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 3c00e6e..87847d5 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -22,6 +22,24 @@
/ {
compatible = "samsung,exynos4212", "samsung,exynos4";
+ clock: clock-controller@10030000 {
+ samsung,armclk-cells = <9>;
+ samsung,armclk-divider-table = <1500000 3 7 0 6 1 2 6 0>,
+ <1400000 3 7 0 6 1 2 6 0>,
+ <1300000 3 7 0 5 1 2 5 0>,
+ <1200000 3 7 0 5 1 2 5 0>,
+ <1100000 3 6 0 4 1 2 4 0>,
+ <1000000 2 5 0 4 1 1 4 0>,
+ < 900000 2 5 0 3 1 1 3 0>,
+ < 800000 2 5 0 3 1 1 3 0>,
+ < 700000 2 4 0 3 1 1 3 0>,
+ < 600000 2 4 0 3 1 1 3 0>,
+ < 500000 2 4 0 3 1 1 3 0>,
+ < 400000 2 4 0 3 1 1 3 0>,
+ < 300000 2 4 0 2 1 1 3 0>,
+ < 200000 1 3 0 1 1 1 3 0>;
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 31db28a..4671714 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -22,6 +22,12 @@
reg = <0x40000000 0x40000000>;
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
led1 {
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e2c0dca..442bf90 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -27,6 +27,12 @@
bootargs ="console=ttySAC2,115200";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
firmware@0203F000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 9583563..6567c9d 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -31,6 +31,12 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
firmware@0204F000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 15d3c0a..85005d1 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -22,6 +22,37 @@
/ {
compatible = "samsung,exynos4412", "samsung,exynos4";
+ cpus {
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ };
+ };
+
+ clock: clock-controller@10030000 {
+ samsung,armclk-cells = <10>;
+ samsung,armclk-divider-table = <1500000 3 7 0 6 1 2 6 0 7>,
+ <1400000 3 7 0 6 1 2 6 0 6>,
+ <1300000 3 7 0 5 1 2 5 0 6>,
+ <1200000 3 7 0 5 1 2 5 0 5>,
+ <1100000 3 6 0 4 1 2 4 0 5>,
+ <1000000 2 5 0 4 1 1 4 0 4>,
+ < 900000 2 5 0 3 1 1 3 0 4>,
+ < 800000 2 5 0 3 1 1 3 0 3>,
+ < 700000 2 4 0 3 1 1 3 0 3>,
+ < 600000 2 4 0 3 1 1 3 0 2>,
+ < 500000 2 4 0 3 1 1 3 0 2>,
+ < 400000 2 4 0 3 1 1 3 0 1>,
+ < 300000 2 4 0 2 1 1 3 0 1>,
+ < 200000 1 3 0 1 1 1 3 0 0>;
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c4a9306..09a86e7 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -31,6 +31,42 @@
mshc0 = &mshc_0;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+
+ operating-points = <
+ 1500000 1350000
+ 1400000 1287500
+ 1300000 1250000
+ 1200000 1187500
+ 1100000 1137500
+ 1000000 1087500
+ 900000 1037500
+ 800000 1000000
+ 700000 987500
+ 600000 975000
+ 500000 950000
+ 400000 925000
+ 300000 900000
+ 200000 900000
+ >;
+ clock-latency = <200000>;
+ boost-frequency = <1500000>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 090f983..443c0d3 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -25,6 +25,12 @@
bootargs = "console=ttySAC2,115200";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
rtc@101E0000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..4bde756 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -19,6 +19,12 @@
chosen {
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
pinctrl@11400000 {
/*
* Disabled pullups since external part has its own pullups and
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..3632f7a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -27,6 +27,12 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
rtc@101E0000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 3742331..f59f8a9 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -63,6 +63,29 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
+
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+
+ operating-points = <
+ 1700000 1300000
+ 1600000 1250000
+ 1500000 1225000
+ 1400000 1200000
+ 1300000 1150000
+ 1200000 1125000
+ 1100000 1100000
+ 1000000 1075000
+ 900000 1050000
+ 800000 1025000
+ 700000 1012500
+ 600000 1000000
+ 500000 975000
+ 400000 950000
+ 300000 937500
+ 200000 925000
+ >;
+ clock-latency = <200000>;
};
cpu@1 {
device_type = "cpu";
@@ -86,6 +109,24 @@
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
+
+ samsung,armclk-cells = <9>;
+ samsung,armclk-divider-table = <1700000 3 7 7 7 3 5 0 2>,
+ <1600000 3 7 7 7 1 4 0 2>,
+ <1500000 2 7 7 7 1 4 0 2>,
+ <1400000 2 7 7 6 1 4 0 2>,
+ <1300000 2 7 7 6 1 3 0 2>,
+ <1200000 2 7 7 5 1 3 0 2>,
+ <1100000 3 7 7 5 1 3 0 2>,
+ <1000000 1 7 7 4 1 2 0 2>,
+ < 900000 1 7 7 4 1 2 0 2>,
+ < 800000 1 7 7 4 1 2 0 2>,
+ < 700000 1 7 7 3 1 1 0 2>,
+ < 600000 1 7 7 3 1 1 0 2>,
+ < 500000 1 7 7 2 1 1 0 2>,
+ < 400000 1 7 7 2 1 1 0 2>,
+ < 300000 1 7 7 1 1 1 0 2>,
+ < 200000 1 7 7 1 1 1 0 2>;
};
clock_audss: audss-clock-controller@3810000 {
--
1.7.4.4
next prev parent reply other threads:[~2014-05-14 1:11 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-14 1:11 [PATCH v4 0/8] cpufreq: use cpufreq-cpu0 driver for exynos based platforms Thomas Abraham
2014-05-14 1:11 ` [PATCH v4 1/8] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies Thomas Abraham
2014-05-14 3:46 ` Viresh Kumar
2014-05-14 6:17 ` Lukasz Majewski
2014-05-14 6:20 ` Viresh Kumar
2014-05-14 13:43 ` Thomas Abraham
2014-05-14 13:50 ` Viresh Kumar
2014-05-14 14:18 ` Thomas Abraham
2014-05-14 14:20 ` Viresh Kumar
2014-05-14 1:11 ` [PATCH v4 2/8] clk: samsung: change scope of samsung clock lock to global Thomas Abraham
2014-05-14 3:50 ` Viresh Kumar
2014-05-14 13:26 ` Thomas Abraham
2014-05-16 12:30 ` Tomasz Figa
2014-05-14 1:11 ` [PATCH v4 3/8] clk: samsung: add infrastructure to register cpu clocks Thomas Abraham
2014-05-15 18:18 ` Doug Anderson
2014-05-15 19:17 ` Heiko Stübner
2014-05-15 19:36 ` Doug Anderson
2014-05-15 20:12 ` Heiko Stübner
2014-05-15 20:26 ` Doug Anderson
2014-05-16 4:55 ` Thomas Abraham
2014-05-16 17:17 ` Tomasz Figa
2014-05-23 14:41 ` Thomas Abraham
2014-05-23 14:50 ` Tomasz Figa
2014-05-14 1:11 ` [PATCH v4 4/8] Documentation: devicetree: add cpu clock configuration data binding for Exynos4/5 Thomas Abraham
2014-05-16 23:24 ` Tomasz Figa
2014-05-17 0:00 ` Tomasz Figa
2014-05-26 6:05 ` Thomas Abraham
2014-05-26 11:02 ` Tomasz Figa
2014-05-14 1:11 ` [PATCH v4 5/8] clk: exynos: use cpu-clock provider type to represent arm clock Thomas Abraham
2014-05-14 21:37 ` Mike Turquette
2014-05-15 7:48 ` Thomas Abraham
2014-05-15 8:10 ` Lukasz Majewski
2014-05-15 9:59 ` Thomas Abraham
2014-05-16 5:14 ` Thomas Abraham
2014-05-16 23:57 ` Tomasz Figa
2014-05-14 1:11 ` Thomas Abraham [this message]
2014-05-16 23:16 ` [PATCH v4 6/8] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data Tomasz Figa
2014-05-14 1:11 ` [PATCH v4 7/8] ARM: Exynos: switch to using generic cpufreq-cpu0 driver Thomas Abraham
2014-05-14 12:50 ` Arnd Bergmann
2014-05-14 13:05 ` Viresh Kumar
2014-05-14 13:11 ` Heiko Stübner
2014-05-14 13:14 ` Viresh Kumar
2014-05-14 13:18 ` Arnd Bergmann
2014-05-14 13:45 ` Rob Herring
2014-05-14 14:33 ` Arnd Bergmann
2014-07-08 5:15 ` Viresh Kumar
2014-05-14 14:03 ` Thomas Abraham
2014-05-14 14:09 ` Sudeep Holla
2014-05-14 14:09 ` Thomas Abraham
2014-05-17 0:04 ` Tomasz Figa
2014-05-14 1:11 ` [PATCH v4 8/8] cpufreq: exynos: remove all exynos specific cpufreq driver support Thomas Abraham
2014-05-14 3:57 ` Viresh Kumar
2014-05-14 7:20 ` Lukasz Majewski
2014-05-14 13:53 ` Thomas Abraham
2014-05-14 12:51 ` [PATCH v4 0/8] cpufreq: use cpufreq-cpu0 driver for exynos based platforms Arnd Bergmann
2014-05-14 13:07 ` Viresh Kumar
2014-05-14 13:16 ` Arnd Bergmann
2014-05-17 0:14 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400029876-5830-7-git-send-email-thomas.ab@samsung.com \
--to=ta.omasab@gmail.com \
--cc=cpufreq@vger.kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=l.majewski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=rjw@rjwysocki.net \
--cc=shawn.guo@linaro.org \
--cc=t.figa@samsung.com \
--cc=thomas.ab@samsung.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox