From: Thomas Abraham <thomas.ab@samsung.com>
To: cpufreq@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org, mturquette@linaro.org,
kgene.kim@samsung.com, t.figa@samsung.com,
l.majewski@samsung.com, viresh.kumar@linaro.org,
thomas.ab@samsung.com, heiko@sntech.de, cw00.choi@samsung.com
Subject: [PATCH v6 4/6] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data
Date: Tue, 17 Jun 2014 20:55:31 +0530 [thread overview]
Message-ID: <1403018733-4187-6-git-send-email-thomas.ab@samsung.com> (raw)
In-Reply-To: <1403018733-4187-1-git-send-email-thomas.ab@samsung.com>
From: Thomas Abraham <thomas.ab@samsung.com>
For Exynos 4210/5250/5420 based platforms, add CPU nodes, operating points and
cpu clock data for migrating from Exynos specific cpufreq driver to using
generic cpufreq drivers.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 6 +++++
arch/arm/boot/dts/exynos4210-trats.dts | 6 +++++
arch/arm/boot/dts/exynos4210-universal_c210.dts | 6 +++++
arch/arm/boot/dts/exynos4210.dtsi | 27 +++++++++++++++++++
arch/arm/boot/dts/exynos5250-arndale.dts | 6 +++++
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 6 +++++
arch/arm/boot/dts/exynos5250.dtsi | 23 ++++++++++++++++
arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 +++++
arch/arm/boot/dts/exynos5420.dtsi | 32 +++++++++++++++++++++++
10 files changed, 124 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index f767c42..49a97fc 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -33,6 +33,12 @@
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck1_reg>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index f516da9..fe32b6a 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -30,6 +30,12 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
+ cpus {
+ cpu: cpu@0 {
+ cpu0-supply = <&varm_breg>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d50eb3a..8ab12d6 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -28,6 +28,12 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
};
+ cpus {
+ cpu: cpu@0 {
+ cpu0-supply = <&vdd_arm_reg>;
+ };
+ };
+
sysram@02020000 {
smp-sysram@0 {
status = "disabled";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index ee3001f..c3a73bf 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,33 @@
pinctrl2 = &pinctrl_2;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+
+ operating-points = <
+ 1200000 1250000
+ 1000000 1150000
+ 800000 1075000
+ 500000 975000
+ 400000 975000
+ 200000 950000
+ >;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x20000>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f5..d9b803b 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -26,6 +26,12 @@
bootargs = "console=ttySAC2,115200";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
rtc@101E0000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 89ac90f..34bb31c 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -19,6 +19,12 @@
chosen {
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
pinctrl@11400000 {
/*
* Disabled pullups since external part has its own pullups and
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..3632f7a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -27,6 +27,12 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck2_reg>;
+ };
+ };
+
rtc@101E0000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 834fb5a..66b0f98 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -63,6 +63,29 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
+
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+
+ operating-points = <
+ 1700000 1300000
+ 1600000 1250000
+ 1500000 1225000
+ 1400000 1200000
+ 1300000 1150000
+ 1200000 1125000
+ 1100000 1100000
+ 1000000 1075000
+ 900000 1050000
+ 800000 1025000
+ 700000 1012500
+ 600000 1000000
+ 500000 975000
+ 400000 950000
+ 300000 937500
+ 200000 925000
+ >;
+ clock-latency = <200000>;
};
cpu@1 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6052aa9..084e587 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -24,6 +24,12 @@
bootargs = "console=ttySAC2,115200 init=/linuxrc";
};
+ cpus {
+ cpu@4 {
+ cpu0-supply = <&buck6_reg>;
+ };
+ };
+
fixed-rate-clocks {
oscclk {
compatible = "samsung,exynos5420-oscclk";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e385322..3baee7f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -59,8 +59,26 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu-cluster.0";
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ clock-latency = <200000>;
+
+ operating-points = <
+ 1800000 1250000
+ 1700000 1212500
+ 1600000 1175000
+ 1500000 1137500
+ 1400000 1112500
+ 1300000 1062500
+ 1200000 1037500
+ 1100000 1012500
+ 1000000 987500
+ 900000 962500
+ 800000 937500
+ 700000 912500
+ >;
};
cpu1: cpu@1 {
@@ -91,8 +109,22 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
+ clocks = <&clock CLK_KFC_CLK>;
+ clock-names = "cpu-cluster.1";
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ clock-latency = <200000>;
+
+ operating-points = <
+ 1300000 1275000
+ 1200000 1212500
+ 1100000 1162500
+ 1000000 1112500
+ 900000 1062500
+ 800000 1025000
+ 700000 975000
+ 600000 937500
+ >;
};
cpu5: cpu@101 {
--
1.7.9.5
next prev parent reply other threads:[~2014-06-17 15:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-17 15:25 [PATCH v6 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Thomas Abraham
2014-06-17 15:25 ` Thomas Abraham
2014-06-17 15:25 ` [PATCH v6 1/6] clk: samsung: add infrastructure to register cpu clocks Thomas Abraham
2014-06-23 2:08 ` amit daniel kachhap
2014-06-23 7:56 ` Arjun K V
2014-06-24 1:36 ` amit daniel kachhap
2014-06-17 15:25 ` [PATCH v6 2/6] clk: samsung: register exynos5420 apll/kpll configuration data Thomas Abraham
2014-06-17 15:25 ` [PATCH v6 3/6] clk: exynos: use cpu-clock provider type to represent arm clock Thomas Abraham
2014-06-23 2:14 ` amit daniel kachhap
2014-06-17 15:25 ` Thomas Abraham [this message]
2014-06-17 15:25 ` [PATCH v6 5/6] ARM: Exynos: switch to using generic cpufreq driver for exynos4210/5250 Thomas Abraham
2014-06-17 15:25 ` [PATCH v6 6/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support Thomas Abraham
2014-06-18 7:51 ` [PATCH v6 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Viresh Kumar
2014-06-19 4:13 ` Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403018733-4187-6-git-send-email-thomas.ab@samsung.com \
--to=thomas.ab@samsung.com \
--cc=cpufreq@vger.kernel.org \
--cc=cw00.choi@samsung.com \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=l.majewski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=t.figa@samsung.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox