From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla-daemon@bugzilla.kernel.org Subject: [Bug 56071] Ondemand doesn't set correct low frequency Date: Tue, 2 Apr 2013 05:23:06 +0000 (UTC) Message-ID: <20130402052306.1563511FB79@bugzilla.kernel.org> References: Mime-Version: 1.0 Return-path: In-Reply-To: Sender: cpufreq-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: cpufreq@vger.kernel.org https://bugzilla.kernel.org/show_bug.cgi?id=56071 --- Comment #3 from Viresh Kumar 2013-04-02 05:23:05 --- On Tue, Apr 2, 2013 at 1:42 AM, wrote: > I've a samsung NP535U3C, powered by AMD A6-4455M APU. Cpupower tells to me that > the lower frequency reachable by my CPU is 900 MHz but ondemand governor switch > only between 1.3 and 2.1 GHz and not between 900 MHz and 2.1GHz as it should > be. I've also tried to set userspace governor to work between those frequencies > but didn't work. Attached there is my cpupower frequency-info output. Thank > you. Your command gives you: limiti hardware: 1.30 GHz - 2.10 GHz I can make out from the above that your cpufreq driver gave min freq possible as 1.3 GHz. Borislav/Thomas, You have any idea about why this can happen? Francescodario, BTW you have any idea from what kernel version this happened? -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.