Re: Re: Manual PST settings for "unrecognized CPUs"

[GoatZilla <goatzilla@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 803 bytes --]

Well, I figured it out.  

Since I'm under the impression my BIOS doesn't have any of this
powersaving stuff, I decided to bypass all of that.  The only relevant
thing to come out of the PSB area is the latency, which I just
arbitrarily set to 200.  Then I go through the same PST motions as
before and make sure maxfid and startvid's match up from the
commandline, and I'm good to go.  I can scale from 300MHz to a slight
overclock at 1900MHz (to compensate for having set the FSB to 100 to
reach 300MHz in the first place).


Mark Newman:  I think you probably just botched the patch.  Make sure
you cut and paste the patch from Milz's email properly.



On another note...  how come I can't choose the powersave governor to
be the default governor?  That's actually the one I want to start out
with.

[-- Attachment #2: cpuinfo.txt --]
[-- Type: text/plain, Size: 842 bytes --]

processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 6
model		: 8
model name	: Unknown CPU Typ
stepping	: 1
cpu MHz		: 299.527
cache size	: 64 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips	: 593.46

processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 6
model		: 8
model name	: Unknown CPU Typ
stepping	: 1
cpu MHz		: 1897.009
cache size	: 64 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips	: 3758.61


[-- Attachment #3: Type: text/plain, Size: 143 bytes --]

_______________________________________________
Cpufreq mailing list
Cpufreq@www.linux.org.uk
http://www.linux.org.uk/mailman/listinfo/cpufreq