From: Benoit Pradelle <benoit.pradelle@uvsq.fr>
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
"cpufreq@vger.kernel.org" <cpufreq@vger.kernel.org>
Subject: Re: Kernel taint on setspeed
Date: Tue, 28 Jan 2014 16:52:38 +0100 [thread overview]
Message-ID: <52E7D246.3010100@uvsq.fr> (raw)
In-Reply-To: <CAOh2x=nF52vaDajLsQTCho_OTJz=2tKyW2nAbMiau7sTgk58WQ@mail.gmail.com>
Hi,
I have trouble reproducing the issue even on 3.12 kernels as it happens
rarely. I've installed a 3.13 and will inform you if I encounter again
the same issue.
Thanks,
Benoit.
Le 21/01/2014 09:49, Viresh Kumar a écrit :
> On Mon, Jan 20, 2014 at 7:38 PM, Benoit Pradelle
> <benoit.pradelle@uvsq.fr> wrote:
>> Hi all,
>>
>> On Linux 3.12.6 over an Intel x86 processor (with intel_pstate=disable), I
>> am trying to change the frequency with the following command sequence:
>>
>> echo "userspace" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
>> echo "3000000" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_setspeed
>>
>> It used to work well on older kernels, but since a recent (unknown) kernel
>> version, the last command occasionaly never returns but I got the following
>> log:
>>
>> [344746.428121] ------------[ cut here ]------------
>> [344746.428132] WARNING: CPU: 7 PID: 1882 at
>> /build/linux-xS3nxO/linux-3.12.6/drivers/cpufreq/cpufreq_governor.c:203
>> cpufreq_governor_dbs+0x6a2/0x710()
>> [344746.428134] Modules linked in: msr cpufreq_userspace nfsv3 parport_pc
>> ppdev lp parport bnep rfcomm bluetooth ip6table_filter ip6_tables
>> iptable_filter ip_tables x_tables autofs4 tun pci_stub vboxpci(O)
>> vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc uinput nfsd auth_rpcgss
>> oid_registry nfs_acl nfs lockd fscache sunrpc fuse loop joydev hid_generic
>> usbhid hid snd_hda_codec_hdmi x86_pkg_temp_thermal snd_hda_codec_realtek
>> snd_hda_intel snd_hda_codec intel_powerclamp snd_hwdep coretemp kvm_intel
>> kvm crc32_pclmul nvidia(PO) snd_pcm iTCO_wdt iTCO_vendor_support
>> snd_page_alloc crc32c_intel ghash_clmulni_intel hp_wmi sparse_keymap evdev
>> rfkill acpi_cpufreq processor psmouse snd_seq snd_seq_device snd_timer snd
>> mei_me aesni_intel wmi pcspkr i2c_i801 serio_raw aes_x86_64 ablk_helper
>> cryptd lrw gf128mul soundcore mei glue_helper lpc_ich mfd_core i2c_core
>> button ext4 crc16 mbcache jbd2 sg sd_mod sr_mod crc_t10dif crct10dif_common
>> cdrom xhci_hcd ahci libahci ehci_pci ehci_hcd libata scsi_mod e1000e usbcore
>> usb_common ptp pps_core thermal fan thermal_sys
>> [344746.428213] CPU: 7 PID: 1882 Comm: tee Tainted: P O
>> 3.12-1-amd64 #1 Debian 3.12.6-2
>> [344746.428215] Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790,
>> BIOS K51 v01.14 09/27/2012
>> [344746.428217] 0000000000000009 ffffffff8148c9d5 0000000000000000
>> ffffffff8105b572
>> [344746.428221] 0000000000000000 ffff880037046a00 0000000000000007
>> 0000000000000002
>> [344746.428224] ffffffff81881fe0 ffffffff81376732 ffffffff8148f559
>> ffff88033449dd00
>> [344746.428228] Call Trace:
>> [344746.428237] [<ffffffff8148c9d5>] ? dump_stack+0x41/0x51
>> [344746.428245] [<ffffffff8105b572>] ? warn_slowpath_common+0x72/0x90
>> [344746.428248] [<ffffffff81376732>] ? cpufreq_governor_dbs+0x6a2/0x710
>> [344746.428253] [<ffffffff8148f559>] ? mutex_lock+0x9/0x30
>> [344746.428261] [<ffffffffa02d600f>] ?
>> acpi_processor_ppc_notifier+0xc0/0xc4 [processor]
>> [344746.428267] [<ffffffff81495c64>] ? notifier_call_chain+0x44/0x70
>> [344746.428274] [<ffffffff81372b84>] ? __cpufreq_governor+0xf4/0x280
>> [344746.428277] [<ffffffff81373b59>] ? __cpufreq_set_policy+0x129/0x1f0
>> [344746.428280] [<ffffffff81373fa5>] ? store_scaling_governor+0xd5/0x1e0
>> [344746.428284] [<ffffffff81373d30>] ? cpufreq_update_policy+0x110/0x110
>> [344746.428287] [<ffffffff81373902>] ? store+0x72/0xb0
>> [344746.428292] [<ffffffff811deba9>] ? sysfs_write_file+0xb9/0x140
>> [344746.428297] [<ffffffff81173113>] ? vfs_write+0xb3/0x1e0
>> [344746.428301] [<ffffffff81173b23>] ? SyS_write+0x43/0xa0
>> [344746.428305] [<ffffffff81499b39>] ? system_call_fastpath+0x16/0x1b
>> [344746.428307] ---[ end trace 42394bba698a65fd ]---
>> [344746.428314] BUG: unable to handle kernel NULL pointer dereference at
>> (null)
>> [344746.428317] IP: [<ffffffff813760df>] cpufreq_governor_dbs+0x4f/0x710
>> [344746.428321] PGD 3be4fe067 PUD 35dc6a067 PMD 0
>> [344746.428325] Oops: 0000 [#1] SMP
>> [344746.428327] Modules linked in: msr cpufreq_userspace nfsv3 parport_pc
>> ppdev lp parport bnep rfcomm bluetooth ip6table_filter ip6_tables
>> iptable_filter ip_tables x_tables autofs4 tun pci_stub vboxpci(O)
>> vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc uinput nfsd auth_rpcgss
>> oid_registry nfs_acl nfs lockd fscache sunrpc fuse loop joydev hid_generic
>> usbhid hid snd_hda_codec_hdmi x86_pkg_temp_thermal snd_hda_codec_realtek
>> snd_hda_intel snd_hda_codec intel_powerclamp snd_hwdep coretemp kvm_intel
>> kvm crc32_pclmul nvidia(PO) snd_pcm iTCO_wdt iTCO_vendor_support
>> snd_page_alloc crc32c_intel ghash_clmulni_intel hp_wmi sparse_keymap evdev
>> rfkill acpi_cpufreq processor psmouse snd_seq snd_seq_device snd_timer snd
>> mei_me aesni_intel wmi pcspkr i2c_i801 serio_raw aes_x86_64 ablk_helper
>> cryptd lrw gf128mul soundcore mei glue_helper lpc_ich mfd_core i2c_core
>> button ext4 crc16 mbcache jbd2 sg sd_mod sr_mod crc_t10dif crct10dif_common
>> cdrom xhci_hcd ahci libahci ehci_pci ehci_hcd libata scsi_mod e1000e usbcore
>> usb_common ptp pps_core thermal fan thermal_sys
>> [344746.428386] CPU: 7 PID: 1882 Comm: tee Tainted: P W O
>> 3.12-1-amd64 #1 Debian 3.12.6-2
>> [344746.428388] Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790,
>> BIOS K51 v01.14 09/27/2012
>> [344746.428390] task: ffff8803a3f03080 ti: ffff88033449c000 task.ti:
>> ffff88033449c000
>> [344746.428391] RIP: 0010:[<ffffffff813760df>] [<ffffffff813760df>]
>> cpufreq_governor_dbs+0x4f/0x710
>> [344746.428395] RSP: 0018:ffff88033449dc50 EFLAGS: 00010293
>> [344746.428397] RAX: 0000000000000024 RBX: 0000000000000000 RCX:
>> 0000000000000006
>> [344746.428398] RDX: 0000000000000007 RSI: 0000000000000000 RDI:
>> 0000000000000009
>> [344746.428400] RBP: ffff880037046a00 R08: 000000000000000a R09:
>> 0000000000000376
>> [344746.428402] R10: 0000000000000000 R11: ffff88033449d986 R12:
>> 0000000000000007
>> [344746.428403] R13: 0000000000000002 R14: ffffffff81881fe0 R15:
>> ffff88040cba16d8
>> [344746.428406] FS: 00007f4067ae6700(0000) GS:ffff88041ddc0000(0000)
>> knlGS:0000000000000000
>> [344746.428407] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [344746.428409] CR2: 0000000000000000 CR3: 000000035dc7d000 CR4:
>> 00000000001407e0
>> [344746.428411] Stack:
>> [344746.428412] ffffffff8148f559 ffff88033449dd00 ffffffffa02d600f
>> 00000000fffffffe
>> [344746.428415] ffffffff81495c64 ffffffff81881be0 0000000000000000
>> ffff880037046a00
>> [344746.428419] 0000000000000002 ffffffff81881d00 ffff8803df64b000
>> 000000000000000a
>> [344746.428422] Call Trace:
>> [344746.428425] [<ffffffff8148f559>] ? mutex_lock+0x9/0x30
>> [344746.428432] [<ffffffffa02d600f>] ?
>> acpi_processor_ppc_notifier+0xc0/0xc4 [processor]
>> [344746.428436] [<ffffffff81495c64>] ? notifier_call_chain+0x44/0x70
>> [344746.428440] [<ffffffff81372b84>] ? __cpufreq_governor+0xf4/0x280
>> [344746.428443] [<ffffffff81373b59>] ? __cpufreq_set_policy+0x129/0x1f0
>> [344746.428446] [<ffffffff81373fa5>] ? store_scaling_governor+0xd5/0x1e0
>> [344746.428449] [<ffffffff81373d30>] ? cpufreq_update_policy+0x110/0x110
>> [344746.428452] [<ffffffff81373902>] ? store+0x72/0xb0
>> [344746.428456] [<ffffffff811deba9>] ? sysfs_write_file+0xb9/0x140
>> [344746.428459] [<ffffffff81173113>] ? vfs_write+0xb3/0x1e0
>> [344746.428463] [<ffffffff81173b23>] ? SyS_write+0x43/0xa0
>> [344746.428466] [<ffffffff81499b39>] ? system_call_fastpath+0x16/0x1b
>> [344746.428468] Code: c0 0f 84 55 02 00 00 48 8b 9d b0 00 00 00 48 85 db 0f
>> 84 4c 06 00 00 41 83 fd 04 0f 84 7b 02 00 00 41 83 fd 05 0f 84 41 02 00 00
>> <48> 8b 03 44 89 e7 ff 50 20 48 89 44 24 08 48 8b 03 83 38 01 0f
>> [344746.428500] RIP [<ffffffff813760df>] cpufreq_governor_dbs+0x4f/0x710
>> [344746.428503] RSP <ffff88033449dc50>
>> [344746.428504] CR2: 0000000000000000
>> [344746.428507] ---[ end trace 42394bba698a65fe ]---
>>
>> Can anyone help with that?
>
> Can you confirm if you see the same on latest kernel as well? i.e. 3.13.
> --
> To unsubscribe from this list: send the line "unsubscribe cpufreq" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
prev parent reply other threads:[~2014-01-28 15:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-20 14:08 Kernel taint on setspeed Benoit Pradelle
2014-01-21 8:49 ` Viresh Kumar
2014-01-28 15:52 ` Benoit Pradelle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E7D246.3010100@uvsq.fr \
--to=benoit.pradelle@uvsq.fr \
--cc=cpufreq@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox