[Bug 56071] New: Ondemand doesn't set correct low frequency

[Bug 56071] New: Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071

           Summary: Ondemand doesn't set correct low frequency
           Product: Power Management
           Version: 2.5
    Kernel Version: 3.9.0
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: cpufreq
        AssignedTo: cpufreq@vger.kernel.org
        ReportedBy: bosconovic@gmail.com
        Regression: No


I've a samsung NP535U3C, powered by AMD A6-4455M APU. Cpupower tells to me that
the lower frequency reachable by my CPU is 900 MHz but ondemand governor switch
only between 1.3 and 2.1 GHz and not between 900 MHz and 2.1GHz as it should
be. I've also tried to set userspace governor to work between those frequencies
but didn't work. Attached there is my cpupower frequency-info output. Thank
you.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071





--- Comment #1 from Francescodario Cuzzocrea <bosconovic@gmail.com>  2013-04-01 20:13:17 ---
Created an attachment (id=96931)
 --> (https://bugzilla.kernel.org/attachment.cgi?id=96931)
output of cpufreq

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071





--- Comment #2 from Francescodario Cuzzocrea <bosconovic@gmail.com>  2013-04-01 20:36:59 ---
I also notice a global decreasing of performances when I plug AC, and
everything start to lag on my desktop, I can provide video. I don't know if
this is related to bug #56081. Thank you.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

Re: [Bug 56071] New: Ondemand doesn't set correct low frequency

[Viresh Kumar]

On Tue, Apr 2, 2013 at 1:42 AM,  <bugzilla-daemon@bugzilla.kernel.org> wrote:
> I've a samsung NP535U3C, powered by AMD A6-4455M APU. Cpupower tells to me that
> the lower frequency reachable by my CPU is 900 MHz but ondemand governor switch
> only between 1.3 and 2.1 GHz and not between 900 MHz and 2.1GHz as it should
> be. I've also tried to set userspace governor to work between those frequencies
> but didn't work. Attached there is my cpupower frequency-info output. Thank
> you.

Your command gives you:

limiti hardware: 1.30 GHz - 2.10 GHz

I can make out from the above that your cpufreq driver gave min freq possible as
1.3 GHz.

Borislav/Thomas,

You have any idea about why this can happen?

Francescodario, BTW you have any idea  from what kernel version this happened?

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071





--- Comment #3 from Viresh Kumar <viresh.kumar@linaro.org>  2013-04-02 05:23:05 ---
On Tue, Apr 2, 2013 at 1:42 AM,  <bugzilla-daemon@bugzilla.kernel.org> wrote:
> I've a samsung NP535U3C, powered by AMD A6-4455M APU. Cpupower tells to me that
> the lower frequency reachable by my CPU is 900 MHz but ondemand governor switch
> only between 1.3 and 2.1 GHz and not between 900 MHz and 2.1GHz as it should
> be. I've also tried to set userspace governor to work between those frequencies
> but didn't work. Attached there is my cpupower frequency-info output. Thank
> you.

Your command gives you:

limiti hardware: 1.30 GHz - 2.10 GHz

I can make out from the above that your cpufreq driver gave min freq possible
as
1.3 GHz.

Borislav/Thomas,

You have any idea about why this can happen?

Francescodario, BTW you have any idea  from what kernel version this happened?

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071





--- Comment #4 from Francescodario Cuzzocrea <bosconovic@gmail.com>  2013-04-02 06:16:01 ---
Hi and thank you for your reply !
Yes, my cpufreqdriver gave the min freq possible to 1.3 GHz, but according to
my CPU specs should be 900 MHz. I've no idea of why this happen, I've tried
everything I can do, like switch to userspace governor and se frequencies by
myself, or set those frequencies in /etc/default/cpupower but nothing worked, I
always get minumum frequency as 1.30 Ghz.

I bought this laptop in December, and this always happened, I've tried 3.5
branch, 3.6 branch, 3.7 branch and 3.8 branch. Now I'm on 3.9rc4.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071


Thomas Renninger <trenn@suse.de> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
                 CC|                            |trenn@suse.de
         Resolution|                            |DOCUMENTED




--- Comment #5 from Thomas Renninger <trenn@suse.de>  2013-04-02 07:53:34 ---
> limiti hardware: 1.30 GHz - 2.10 GHz
This should not be possible.
The interface to limit frequency is a number.
For example 0 means no limitation, 1 means the highest frequency is limited.

Ah wait, I think I know what happens.

This is read out from the HW (and applies to CPU specs):
    Boost States: 2
    Total States: 7
    Pstate-Pb0: 2600MHz (boost state)
    Pstate-Pb1: 2300MHz (boost state)
    Pstate-P0:  2100MHz
    Pstate-P1:  1800MHz
    Pstate-P2:  1500MHz
    Pstate-P3:  1300MHz
    Pstate-P4:  900MHz
This is done to be able to show available boost states and is normally hidden,
also the kernel does not know about this!

The kernel gets the supported CPU frequency table from the BIOS via ACPI.
And your BIOS vendor decided to hide the 900MHz.

That's ok, because on latest CPUs (and your one probably is a rather new
platform, because it supports boost states and therefore also suppports C-, CPU
sleep states) the kernel will enter deep sleeps states when idle which is even
more efficient than 900MHz CPU frequency.

I already close this one documented.
Everything works as designed.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071





--- Comment #6 from Francescodario Cuzzocrea <bosconovic@gmail.com>  2013-04-02 08:57:56 ---
Thank you for the reply and for clarifying to me how the kernel work ! 

Buth what about the global decreasing of performances when AC is plugged in ?
Is this also related to cpufreq ? 

Here is a video of what I'm talking about :
https://www.youtube.com/watch?v=tg2Jpuw_F_o

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071





--- Comment #7 from Thomas Renninger <trenn@suse.de>  2013-04-02 10:08:08 ---
> Is this also related to cpufreq ?
This is certainly ACPI related.
It's hard to guess, but your BIOS seem to request to limit cpufreq or
throttling.
Cpufreq limitation you should see in this line:
limiti hardware: 1.30 GHz - 2.10 GHz
from cpupower frequency-info output.
This should be 1.30 GHz - 1.30 GHz
or similar after you plugged in AC.

Best you increase ACPI debug output before plugging AC:
echo 0x20f >/sys/module/acpi/parameters/debug_level
echo 0xffffffff >/sys/module/acpi/parameters/debug_layer

then do the plugging, wait a second or two and reduce debugging again.
echo 0 >/sys/module/acpi/parameters/debug_level
echo 0 >/sys/module/acpi/parameters/debug_layer

This could produce quite some kernel output, so you may want to boot with
log_buf_len=16M
boot parameter.
Then attach dmesg and acpidump of your machine to the bug you created for the
AC issue (mixing up bugs is confusing if you add other people later).

Before you start with all this, make sure you have the latest BIOS installed.
ACPI bugs can be tricky, best follow instructions of Lan Tianyu.
Feel free to add me to CC.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 56071] Ondemand doesn't set correct low frequency

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=56071

Len Brown <lenb@kernel.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|RESOLVED                    |CLOSED
                 CC|                            |lenb@kernel.org

-- 
You are receiving this mail because:
You are the assignee for the bug.