From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugme-daemon@bugzilla.kernel.org Subject: [Bug 9703] New: T5500 1.66GHz: kernel reports bogus available frequencies and downscales only to 996MHz Date: Sun, 6 Jan 2008 11:51:31 -0800 (PST) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk To: cpufreq@www.linux.org.uk http://bugzilla.kernel.org/show_bug.cgi?id=9703 Summary: T5500 1.66GHz: kernel reports bogus available frequencies and downscales only to 996MHz Product: Power Management Version: 2.5 KernelVersion: 2.6.24-rc6 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: cpufreq AssignedTo: cpufreq@www.linux.org.uk ReportedBy: olel@ans.pl Windows XP SP2 claims that it is able to downscale frequency down to 400MHz, however Linux is only able to get 996MHz: $ cat scaling_available_frequenc 1667000 1666000 1665000 1664000 1663000 1662000 1661000 1660000 1328000 996000 These 1666000-1660000 look rather bogus. processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping : 6 cpu MHz : 1667.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3327.10 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping : 6 cpu MHz : 1667.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3324.55 clflush size : 64 Linux version 2.6.24-rc6 (root@pixie) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP PREEMPT Sun Jan 6 19:20:40 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 2047MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 524240) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 524240 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 524240 On node 0 totalpages: 524240 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 4063 pages used for memmap Normal zone: 516081 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F7BB0, 0014 (r0 ACPIAM) ACPI: RSDT 7FFD0000, 0038 (r1 AMI OEMRSDT 10000604 MSFT 97) ACPI: FACP 7FFD0200, 0084 (r2 AMI OEMFACP 10000604 MSFT 97) ACPI: DSDT 7FFD0460, 7BC6 (r1 A6JC0 A6JC0220 220 INTL 2002026) ACPI: FACS 7FFDE000, 0040 ACPI: APIC 7FFD0390, 005C (r1 AMI OEMAPIC 10000604 MSFT 97) ACPI: MCFG 7FFD03F0, 003C (r1 AMI OEMMCFG 10000604 MSFT 97) ACPI: BOOT 7FFD0430, 0028 (r1 AMI OEMBOOT 10000604 MSFT 97) ACPI: OEMB 7FFDE040, 0046 (r1 AMI AMI_OEM 10000604 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520145 Kernel command line: BOOT_IMAGE=Linux-2.6.24r6 ro root=802 rootflags=data=journal setsid mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1662.529 MHz processor. Console: colour VGA+ 80x30 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 2072080k/2096960k available (3657k kernel code, 24308k reserved, 1809k data, 220k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB) lowmem : 0x78000000 - 0xf7fd0000 (2047 MB) .init : 0x7865f000 - 0x78696000 ( 220 kB) .data : 0x784926ed - 0x78656c8c (1809 kB) .text : 0x78100000 - 0x784926ed (3657 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3327.10 BogoMIPS (lpj=1663553) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1164 Objects with 67 Devices 384 Methods 36 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3324.55 BogoMIPS (lpj=1662275) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 Total of 2 processors activated (6651.65 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 4 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:......................................................................................................................... Initialized 34/36 Regions 17/17 Fields 32/33 Buffers 38/40 Packages (1173 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.... Executed 4 _INI methods requiring 0 _STA executions (examined 72 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) Force enabled HPET at base address 0xfed00000 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12) ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x480-0x4bf has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved system 00:0a: iomem range 0xffc00000-0xfff7ffff could not be reserved system 00:0b: ioport range 0x400-0x41f has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0b: iomem range 0xfec10000-0xfec17fff has been reserved system 00:0b: iomem range 0xfec28000-0xfec2ffff has been reserved system 00:0c: iomem range 0xe0000000-0xe3ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved system 00:0d: iomem range 0x0-0x0 could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f9f00000-fdffffff PREFETCH window: bdf00000-ddefffff PCI: Bridge: 0000:00:1c.0 IO window: c000-cfff MEM window: fe000000-fe0fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: fe100000-fe1fffff PREFETCH window: disabled. PCI: Bus 5, cardbus bridge: 0000:04:01.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 88000000-8bffffff MEM window: 8c000000-8fffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fe200000-feafffff PREFETCH window: ddf00000-dfefffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x52 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/O]. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] ACPI: AC Adapter [AC0] (on-line) ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FN00] (off) input: Video Bus as /class/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - 83, should be 59 [20070126] ACPI: SSDT 7FFD8030, 0CC3 (r1 AMI CPU1PM 1 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 000A) - 17 Objects with 0 Devices 8 Methods 0 Regions Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - 26, should be EC [20070126] ACPI: SSDT 7FFD8D00, 04A4 (r1 AMI CPU2PM 1 INTL 20051117) Parsing all Control Methods: Table [SSDT](id 0012) - 14 Objects with 0 Devices 8 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (66 C) Asus Laptop ACPI Extras version 0.30 unsupported model A6JC, trying default values send /proc/acpi/dsdt to the developers Real Time Clock Driver v1.12ac intel_rng: FWH not detected Linux agpgart interface v0.102 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled loop: module loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: RTL8168b/8111b at 0xf8834000, 00:1a:92:48:f2:af, XID 38000000 IRQ 220 console [netcon0] enabled netconsole: network logging started ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 ata1.00: ATA-6: ST98823A, 3.06, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA ST98823A 3.06 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PR03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr 0:0:1:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:04:01.1[B] -> GSI 18 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized eth1394: eth1: IPv4 over IEEE 1394 (fw-host0) Yenta: CardBus bridge found at 0000:04:01.0 [1043:1237] Yenta: ISA IRQ mask 0x04b8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ec00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e480 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-7: new high speed USB device using ehci_hcd and address 3 usb 1-7: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usb 4-2: new full speed USB device using uhci_hcd and address 2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800037f22d8] usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input5 Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input6 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb Bluetooth: Virtual HCI driver ver 1.2 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: HCILL protocol initialized Bluetooth: Broadcom Blutonium firmware driver ver 1.1 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.9 usbcore: registered new interface driver bpa10x Bluetooth: BlueFRITZ! USB driver ver 1.1 usbcore: registered new interface driver bfusb cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to: TSC halts in idle. usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 22 Time: hpet clocksource has been installed. PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xfebfc000 irq 22 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI No-Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 6 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with journal data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.