From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
To: dccp@vger.kernel.org
Subject: [PATCH 6/14]: Remove now unused parts of the old CCID interface
Date: Wed, 03 Oct 2007 14:02:40 +0000 [thread overview]
Message-ID: <200710031502.40855@strip-the-willow> (raw)
[DCCP]: Remove now unused parts of the old CCID interface
The TX/RX CCIDs of the minisock are now redundant; similar to the Ack Vector case,
their value equals initially that of the sysctl, but at the end of feature negotiation
may be something different.
The old interface removed by this patch thus has been replaced by the newer interface to
dynamically query the currently loaded CCIDs earlier in this patch set.
Also removed the constructors for the TX CCID and the RX CCID, since the switch rx/non-rx
is done by the handler in minisocks.c (and the handler is the only place in the code
where CCIDs are loaded).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
---
Documentation/networking/dccp.txt | 13 +++++++------
include/linux/dccp.h | 3 ---
net/dccp/ccid.c | 14 --------------
net/dccp/ccid.h | 5 -----
net/dccp/feat.c | 12 ------------
net/dccp/minisocks.c | 2 --
6 files changed, 7 insertions(+), 42 deletions(-)
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -45,8 +45,6 @@ EXPORT_SYMBOL_GPL(dccp_death_row);
void dccp_minisock_init(struct dccp_minisock *dmsk)
{
dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window;
- dmsk->dccpms_rx_ccid = sysctl_dccp_feat_rx_ccid;
- dmsk->dccpms_tx_ccid = sysctl_dccp_feat_tx_ccid;
dmsk->dccpms_ack_ratio = sysctl_dccp_feat_ack_ratio;
dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector;
dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count;
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -136,18 +136,19 @@ retries2
send_ndp = 1
Whether or not to send NDP count options (sec. 7.7.2).
+tx_ccid = 2
+ Default CCID for the sender-receiver half-connection. Depending on the
+ choice of CCID, the Send Ack Vector feature is enabled automatically.
+
+rx_ccid = 2
+ Default CCID for the receiver-sender half-connection; see tx_ccid.
+
send_ackvec = 1
Whether or not to send Ack Vector options (sec. 11.5).
ack_ratio = 2
The default Ack Ratio (sec. 11.3) to use.
-tx_ccid = 2
- Default CCID for the sender-receiver half-connection.
-
-rx_ccid = 2
- Default CCID for the receiver-sender half-connection.
-
seq_window = 100
The initial sequence window (sec. 7.5.2).
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -382,7 +382,6 @@ static inline unsigned int dccp_hdr_len(
* Will be used to pass the state from dccp_request_sock to dccp_sock.
*
* @dccpms_sequence_window - Sequence Window Feature (section 7.5.2)
- * @dccpms_ccid - Congestion Control Id (CCID) (section 10)
* @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5)
* @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2)
* @dccpms_ack_ratio - Ack Ratio Feature (section 11.3)
@@ -391,8 +390,6 @@ static inline unsigned int dccp_hdr_len(
*/
struct dccp_minisock {
__u64 dccpms_sequence_window;
- __u8 dccpms_rx_ccid;
- __u8 dccpms_tx_ccid;
__u8 dccpms_send_ack_vector;
__u8 dccpms_send_ndp_count;
__u8 dccpms_ack_ratio;
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -1025,18 +1025,6 @@ int dccp_feat_init(struct sock *sk)
INIT_LIST_HEAD(&dmsk->dccpms_pending); /* XXX no longer used */
INIT_LIST_HEAD(&dmsk->dccpms_conf); /* XXX no longer used */
- /* CCID L */
- rc = dccp_feat_register_sp(&dp->dccps_featneg, DCCPF_CCID, 1, 0,
- &dmsk->dccpms_tx_ccid, 1);
- if (rc)
- goto out;
-
- /* CCID R */
- rc = dccp_feat_register_sp(&dp->dccps_featneg, DCCPF_CCID, 0, 0,
- &dmsk->dccpms_rx_ccid, 1);
- if (rc)
- goto out;
-
/* Ack ratio */
rc = dccp_feat_register_nn(&dp->dccps_featneg, DCCPF_ACK_RATIO, 0,
dmsk->dccpms_ack_ratio);
--- a/net/dccp/ccid.c
+++ b/net/dccp/ccid.c
@@ -253,20 +253,6 @@ out_module_put:
EXPORT_SYMBOL_GPL(ccid_new);
-struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, gfp_t gfp)
-{
- return ccid_new(id, sk, 1, gfp);
-}
-
-EXPORT_SYMBOL_GPL(ccid_hc_rx_new);
-
-struct ccid *ccid_hc_tx_new(unsigned char id,struct sock *sk, gfp_t gfp)
-{
- return ccid_new(id, sk, 0, gfp);
-}
-
-EXPORT_SYMBOL_GPL(ccid_hc_tx_new);
-
static void ccid_delete(struct ccid *ccid, struct sock *sk, int rx)
{
struct ccid_operations *ccid_ops;
--- a/net/dccp/ccid.h
+++ b/net/dccp/ccid.h
@@ -88,11 +88,6 @@ extern int ccid_getsockopt_available_cc
extern struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx,
gfp_t gfp);
-extern struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk,
- gfp_t gfp);
-extern struct ccid *ccid_hc_tx_new(unsigned char id, struct sock *sk,
- gfp_t gfp);
-
static inline int ccid_get_current_id(struct dccp_sock *dp, bool rx)
{
struct ccid *ccid = rx ? dp->dccps_hc_rx_ccid : dp->dccps_hc_tx_ccid;
next reply other threads:[~2007-10-03 14:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-03 14:02 Gerrit Renker [this message]
2007-10-03 20:01 ` [PATCH 6/14]: Remove now unused parts of the old CCID interface Ian McDonald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710031502.40855@strip-the-willow \
--to=gerrit@erg.abdn.ac.uk \
--cc=dccp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox