From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: devicetree-compiler-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2] checks: add graph binding checks
Date: Thu, 14 Dec 2017 21:18:53 -0600 [thread overview]
Message-ID: <20171215031853.8229-1-robh@kernel.org> (raw)
Add checks for DT graph bindings. These checks check node names,
unit-addresses and link connections on ports, port, and endpoint nodes.
The graph nodes are matched by finding nodes named 'endpoint' or with a
'remote-endpoint' property. We can't match on 'ports' or 'port' nodes
because those names are used for non-graph nodes. While the graph nodes
aren't really buses, using the bus pointer to tag matched nodes is
convenient.
Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
v2:
- add test case
- fix unused variable error
checks.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/bad-graph.dts | 24 +++++++++
tests/run_tests.sh | 3 ++
3 files changed, 166 insertions(+)
create mode 100644 tests/bad-graph.dts
diff --git a/checks.c b/checks.c
index 1cded3658491..9fce9116ce11 100644
--- a/checks.c
+++ b/checks.c
@@ -1370,6 +1370,143 @@ static void check_interrupts_property(struct check *c,
}
WARNING(interrupts_property, check_interrupts_property, &phandle_references);
+static const struct bus_type graph_port_bus = {
+ .name = "graph-port",
+};
+
+static const struct bus_type graph_ports_bus = {
+ .name = "graph-ports",
+};
+
+static void check_graph_nodes(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ struct node *child;
+
+ for_each_child(node, child) {
+ if (!(strprefixeq(child->name, child->basenamelen, "endpoint") ||
+ get_property(child, "remote-endpoint")))
+ continue;
+
+ node->bus = &graph_port_bus;
+ }
+
+ /* The parent of 'port' nodes can be either 'ports' or a device */
+ if (node->bus && !node->parent->bus &&
+ (streq(node->parent->name, "ports") || get_property(node, "reg")))
+ node->parent->bus = &graph_ports_bus;
+}
+WARNING(graph_nodes, check_graph_nodes, NULL);
+
+static void check_graph_child_address(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ int cnt = 0;
+ struct node *child;
+
+ if (node->bus != &graph_ports_bus && node->bus != &graph_port_bus)
+ return;
+
+ for_each_child(node, child)
+ cnt++;
+
+ if (cnt == 1 && node->addr_cells != -1)
+ FAIL(c, dti, "graph node '%s' has single child node, unit address is not necessary",
+ node->fullpath);
+}
+WARNING(graph_child_address, check_graph_child_address, NULL, &graph_nodes);
+
+static void check_graph_reg(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ char unit_addr[9];
+ const char *unitname = get_unitname(node);
+ struct property *prop;
+
+ prop = get_property(node, "reg");
+ if (!prop || !unitname)
+ return;
+
+ if (!(prop->val.val && prop->val.len == sizeof(cell_t))) {
+ FAIL(c, dti, "graph node '%s' malformed 'reg' property", node->fullpath);
+ return;
+ }
+
+ snprintf(unit_addr, sizeof(unit_addr), "%x", propval_cell(prop));
+ if (!streq(unitname, unit_addr))
+ FAIL(c, dti, "graph node '%s' unit address error, expected \"%s\"",
+ node->fullpath, unit_addr);
+
+ if (node->parent->addr_cells != 1)
+ FAIL(c, dti, "'#address-cells' is %d, must be 1 in graph node '%s'",
+ node->parent->addr_cells, node->fullpath);
+ if (node->parent->size_cells != 0)
+ FAIL(c, dti, "'#size-cells' is %d, must be 0 in graph node '%s'",
+ node->parent->size_cells, node->fullpath);
+}
+
+static void check_graph_port(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ if (node->bus != &graph_port_bus)
+ return;
+
+ if (!strprefixeq(node->name, node->basenamelen, "port"))
+ FAIL(c, dti, "graph port node '%s' name should be 'port'",
+ node->fullpath);
+
+ check_graph_reg(c, dti, node);
+}
+WARNING(graph_port, check_graph_port, NULL, &graph_nodes);
+
+static struct node *get_remote_endpoint(struct check *c, struct dt_info *dti,
+ struct node *endpoint)
+{
+ int phandle;
+ struct node *node;
+ struct property *prop;
+
+ prop = get_property(endpoint, "remote-endpoint");
+ if (!prop)
+ return NULL;
+
+ phandle = propval_cell(prop);
+ /* Give up if this is an overlay with external references */
+ if (phandle == 0 || phandle == -1)
+ return NULL;
+
+ node = get_node_by_phandle(dti->dt, phandle);
+ if (!node)
+ FAIL(c, dti, "graph endpoint node '%s' 'remote-endpoint' phandle is not valid",
+ endpoint->fullpath);
+
+ return node;
+}
+
+static void check_graph_endpoint(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ struct node *remote_node;
+
+ if (!node->parent || node->parent->bus != &graph_port_bus)
+ return;
+
+ if (!strprefixeq(node->name, node->basenamelen, "endpoint"))
+ FAIL(c, dti, "graph endpont node '%s' name should be 'endpoint'",
+ node->fullpath);
+
+ check_graph_reg(c, dti, node);
+
+ remote_node = get_remote_endpoint(c, dti, node);
+ if (!remote_node)
+ return;
+
+ if (get_remote_endpoint(c, dti, remote_node) != node)
+ FAIL(c, dti, "graph endpoint node '%s' connection to '%s' is not bidirectional",
+ node->fullpath, remote_node->fullpath);
+}
+WARNING(graph_endpoint, check_graph_endpoint, NULL, &graph_nodes);
+
static struct check *check_table[] = {
&duplicate_node_names, &duplicate_property_names,
&node_name_chars, &node_name_format, &property_name_chars,
@@ -1429,6 +1566,8 @@ static struct check *check_table[] = {
&alias_paths,
+ &graph_nodes, &graph_child_address, &graph_port, &graph_endpoint,
+
&always_fail,
};
diff --git a/tests/bad-graph.dts b/tests/bad-graph.dts
new file mode 100644
index 000000000000..522da0edbbc8
--- /dev/null
+++ b/tests/bad-graph.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/ {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bad_endpoint: port-a@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint@d0 {
+ reg = <0>;
+ remote-endpoint = <0xdeadbeef>;
+ };
+
+ };
+
+ port@1 {
+ reg = <0>;
+ };
+ };
+};
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index 61c95f1fc899..87915ef4c9f9 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -561,6 +561,9 @@ dtc_tests () {
check_tests unit-addr-leading-0s.dts unit_address_format
check_tests bad-phandle-cells.dts interrupts_extended_property
check_tests bad-gpio.dts gpios_property
+ check_tests bad-graph.dts graph_child_address
+ check_tests bad-graph.dts graph_port
+ check_tests bad-graph.dts graph_endpoint
run_sh_test dtc-checkfails.sh deprecated_gpio_property -- -Wdeprecated_gpio_property -I dts -O dtb bad-gpio.dts
check_tests bad-interrupt-cells.dts interrupts_property
run_sh_test dtc-checkfails.sh node_name_chars -- -I dtb -O dtb bad_node_char.dtb
--
2.14.1
next reply other threads:[~2017-12-15 3:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 3:18 Rob Herring [this message]
[not found] ` <20171215031853.8229-1-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-19 5:04 ` [PATCH v2] checks: add graph binding checks David Gibson
[not found] ` <20171219050400.GN4786-K0bRW+63XPQe6aEkudXLsA@public.gmane.org>
2017-12-19 18:36 ` Rob Herring
[not found] ` <CAL_Jsq+3AiKuBj5kRA+EDpGSBBYJ-J4ZRCf0Yuk_XF9eMKb18w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-29 14:49 ` Rob Herring
[not found] ` <CAL_JsqKi9zU6tLotqcRVYSfCCDKF1Oxz=1=3PpMZTRtdJr=tcQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-13 5:58 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171215031853.8229-1-robh@kernel.org \
--to=robh-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=devicetree-compiler-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).