From: David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>
To: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Julia Lawall <Julia.Lawall-L2FTfq7BK8M@public.gmane.org>,
devicetree-compiler-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/3] checks: centralize printing of node path in check_msg
Date: Fri, 9 Feb 2018 17:53:18 +1100 [thread overview]
Message-ID: <20180209065318.GI11634@umbus.fritz.box> (raw)
In-Reply-To: <20180131145705.21335-2-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 28411 bytes --]
On Wed, Jan 31, 2018 at 08:57:03AM -0600, Rob Herring wrote:
> Most error/warning messages print the node path as part of their error
> message. Move printing of the node path into check_msg() so the
> formatting can be standardized to the form:
>
> <output file>: (ERROR|warning) (<check name>): <full node name>: <check message>
>
> Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Applied, thanks.
> ---
> checks.c | 232 ++++++++++++++++++++++++++++-----------------------------------
> 1 file changed, 104 insertions(+), 128 deletions(-)
>
> diff --git a/checks.c b/checks.c
> index 1cded3658491..54df014c1c79 100644
> --- a/checks.c
> +++ b/checks.c
> @@ -72,7 +72,8 @@ struct check {
> #define CHECK(nm_, fn_, d_, ...) \
> CHECK_ENTRY(nm_, fn_, d_, false, false, __VA_ARGS__)
>
> -static inline void PRINTF(3, 4) check_msg(struct check *c, struct dt_info *dti,
> +static inline void PRINTF(4, 5) check_msg(struct check *c, struct dt_info *dti,
> + struct node *node,
> const char *fmt, ...)
> {
> va_list ap;
> @@ -83,17 +84,19 @@ static inline void PRINTF(3, 4) check_msg(struct check *c, struct dt_info *dti,
> fprintf(stderr, "%s: %s (%s): ",
> strcmp(dti->outname, "-") ? dti->outname : "<stdout>",
> (c->error) ? "ERROR" : "Warning", c->name);
> + if (node)
> + fprintf(stderr, "%s: ", node->fullpath);
> vfprintf(stderr, fmt, ap);
> fprintf(stderr, "\n");
> }
> va_end(ap);
> }
>
> -#define FAIL(c, dti, ...) \
> +#define FAIL(c, dti, node, ...) \
> do { \
> TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
> (c)->status = FAILED; \
> - check_msg((c), dti, __VA_ARGS__); \
> + check_msg((c), dti, node, __VA_ARGS__); \
> } while (0)
>
> static void check_nodes_props(struct check *c, struct dt_info *dti, struct node *node)
> @@ -126,7 +129,7 @@ static bool run_check(struct check *c, struct dt_info *dti)
> error = error || run_check(prq, dti);
> if (prq->status != PASSED) {
> c->status = PREREQ;
> - check_msg(c, dti, "Failed prerequisite '%s'",
> + check_msg(c, dti, NULL, "Failed prerequisite '%s'",
> c->prereq[i]->name);
> }
> }
> @@ -156,7 +159,7 @@ out:
> static inline void check_always_fail(struct check *c, struct dt_info *dti,
> struct node *node)
> {
> - FAIL(c, dti, "always_fail check");
> + FAIL(c, dti, node, "always_fail check");
> }
> CHECK(always_fail, check_always_fail, NULL);
>
> @@ -171,8 +174,7 @@ static void check_is_string(struct check *c, struct dt_info *dti,
> return; /* Not present, assumed ok */
>
> if (!data_is_one_string(prop->val))
> - FAIL(c, dti, "\"%s\" property in %s is not a string",
> - propname, node->fullpath);
> + FAIL(c, dti, node, "\"%s\" property is not a string", propname);
> }
> #define WARNING_IF_NOT_STRING(nm, propname) \
> WARNING(nm, check_is_string, (propname))
> @@ -196,8 +198,8 @@ static void check_is_string_list(struct check *c, struct dt_info *dti,
> while (rem > 0) {
> l = strnlen(str, rem);
> if (l == rem) {
> - FAIL(c, dti, "\"%s\" property in %s is not a string list",
> - propname, node->fullpath);
> + FAIL(c, dti, node, "\"%s\" property is not a string list",
> + propname);
> break;
> }
> rem -= l + 1;
> @@ -220,8 +222,8 @@ static void check_is_cell(struct check *c, struct dt_info *dti,
> return; /* Not present, assumed ok */
>
> if (prop->val.len != sizeof(cell_t))
> - FAIL(c, dti, "\"%s\" property in %s is not a single cell",
> - propname, node->fullpath);
> + FAIL(c, dti, node, "\"%s\" property is not a single cell",
> + propname);
> }
> #define WARNING_IF_NOT_CELL(nm, propname) \
> WARNING(nm, check_is_cell, (propname))
> @@ -242,8 +244,7 @@ static void check_duplicate_node_names(struct check *c, struct dt_info *dti,
> child2;
> child2 = child2->next_sibling)
> if (streq(child->name, child2->name))
> - FAIL(c, dti, "Duplicate node name %s",
> - child->fullpath);
> + FAIL(c, dti, node, "Duplicate node name");
> }
> ERROR(duplicate_node_names, check_duplicate_node_names, NULL);
>
> @@ -257,8 +258,8 @@ static void check_duplicate_property_names(struct check *c, struct dt_info *dti,
> if (prop2->deleted)
> continue;
> if (streq(prop->name, prop2->name))
> - FAIL(c, dti, "Duplicate property name %s in %s",
> - prop->name, node->fullpath);
> + FAIL(c, dti, node, "Duplicate property name %s",
> + prop->name);
> }
> }
> }
> @@ -276,8 +277,8 @@ static void check_node_name_chars(struct check *c, struct dt_info *dti,
> int n = strspn(node->name, c->data);
>
> if (n < strlen(node->name))
> - FAIL(c, dti, "Bad character '%c' in node %s",
> - node->name[n], node->fullpath);
> + FAIL(c, dti, node, "Bad character '%c' in node name",
> + node->name[n]);
> }
> ERROR(node_name_chars, check_node_name_chars, PROPNODECHARS "@");
>
> @@ -287,8 +288,8 @@ static void check_node_name_chars_strict(struct check *c, struct dt_info *dti,
> int n = strspn(node->name, c->data);
>
> if (n < node->basenamelen)
> - FAIL(c, dti, "Character '%c' not recommended in node %s",
> - node->name[n], node->fullpath);
> + FAIL(c, dti, node, "Character '%c' not recommended in node name",
> + node->name[n]);
> }
> CHECK(node_name_chars_strict, check_node_name_chars_strict, PROPNODECHARSSTRICT);
>
> @@ -296,8 +297,7 @@ static void check_node_name_format(struct check *c, struct dt_info *dti,
> struct node *node)
> {
> if (strchr(get_unitname(node), '@'))
> - FAIL(c, dti, "Node %s has multiple '@' characters in name",
> - node->fullpath);
> + FAIL(c, dti, node, "multiple '@' characters in node name");
> }
> ERROR(node_name_format, check_node_name_format, NULL, &node_name_chars);
>
> @@ -315,12 +315,10 @@ static void check_unit_address_vs_reg(struct check *c, struct dt_info *dti,
>
> if (prop) {
> if (!unitname[0])
> - FAIL(c, dti, "Node %s has a reg or ranges property, but no unit name",
> - node->fullpath);
> + FAIL(c, dti, node, "node has a reg or ranges property, but no unit name");
> } else {
> if (unitname[0])
> - FAIL(c, dti, "Node %s has a unit name, but no reg property",
> - node->fullpath);
> + FAIL(c, dti, node, "node has a unit name, but no reg property");
> }
> }
> WARNING(unit_address_vs_reg, check_unit_address_vs_reg, NULL);
> @@ -334,8 +332,8 @@ static void check_property_name_chars(struct check *c, struct dt_info *dti,
> int n = strspn(prop->name, c->data);
>
> if (n < strlen(prop->name))
> - FAIL(c, dti, "Bad character '%c' in property name \"%s\", node %s",
> - prop->name[n], prop->name, node->fullpath);
> + FAIL(c, dti, node, "Bad character '%c' in property name \"%s\"",
> + prop->name[n], prop->name);
> }
> }
> ERROR(property_name_chars, check_property_name_chars, PROPNODECHARS);
> @@ -366,8 +364,8 @@ static void check_property_name_chars_strict(struct check *c,
> n = strspn(name, c->data);
> }
> if (n < strlen(name))
> - FAIL(c, dti, "Character '%c' not recommended in property name \"%s\", node %s",
> - name[n], prop->name, node->fullpath);
> + FAIL(c, dti, node, "Character '%c' not recommended in property name \"%s\"",
> + name[n], prop->name);
> }
> }
> CHECK(property_name_chars_strict, check_property_name_chars_strict, PROPNODECHARSSTRICT);
> @@ -400,7 +398,7 @@ static void check_duplicate_label(struct check *c, struct dt_info *dti,
> return;
>
> if ((othernode != node) || (otherprop != prop) || (othermark != mark))
> - FAIL(c, dti, "Duplicate label '%s' on " DESCLABEL_FMT
> + FAIL(c, dti, node, "Duplicate label '%s' on " DESCLABEL_FMT
> " and " DESCLABEL_FMT,
> label, DESCLABEL_ARGS(node, prop, mark),
> DESCLABEL_ARGS(othernode, otherprop, othermark));
> @@ -440,8 +438,8 @@ static cell_t check_phandle_prop(struct check *c, struct dt_info *dti,
> return 0;
>
> if (prop->val.len != sizeof(cell_t)) {
> - FAIL(c, dti, "%s has bad length (%d) %s property",
> - node->fullpath, prop->val.len, prop->name);
> + FAIL(c, dti, node, "bad length (%d) %s property",
> + prop->val.len, prop->name);
> return 0;
> }
>
> @@ -452,8 +450,8 @@ static cell_t check_phandle_prop(struct check *c, struct dt_info *dti,
> /* "Set this node's phandle equal to some
> * other node's phandle". That's nonsensical
> * by construction. */ {
> - FAIL(c, dti, "%s in %s is a reference to another node",
> - prop->name, node->fullpath);
> + FAIL(c, dti, node, "%s is a reference to another node",
> + prop->name);
> }
> /* But setting this node's phandle equal to its own
> * phandle is allowed - that means allocate a unique
> @@ -466,8 +464,8 @@ static cell_t check_phandle_prop(struct check *c, struct dt_info *dti,
> phandle = propval_cell(prop);
>
> if ((phandle == 0) || (phandle == -1)) {
> - FAIL(c, dti, "%s has bad value (0x%x) in %s property",
> - node->fullpath, phandle, prop->name);
> + FAIL(c, dti, node, "bad value (0x%x) in %s property",
> + phandle, prop->name);
> return 0;
> }
>
> @@ -493,16 +491,16 @@ static void check_explicit_phandles(struct check *c, struct dt_info *dti,
> return;
>
> if (linux_phandle && phandle && (phandle != linux_phandle))
> - FAIL(c, dti, "%s has mismatching 'phandle' and 'linux,phandle'"
> - " properties", node->fullpath);
> + FAIL(c, dti, node, "mismatching 'phandle' and 'linux,phandle'"
> + " properties");
>
> if (linux_phandle && !phandle)
> phandle = linux_phandle;
>
> other = get_node_by_phandle(root, phandle);
> if (other && (other != node)) {
> - FAIL(c, dti, "%s has duplicated phandle 0x%x (seen before at %s)",
> - node->fullpath, phandle, other->fullpath);
> + FAIL(c, dti, node, "duplicated phandle 0x%x (seen before at %s)",
> + phandle, other->fullpath);
> return;
> }
>
> @@ -526,8 +524,8 @@ static void check_name_properties(struct check *c, struct dt_info *dti,
>
> if ((prop->val.len != node->basenamelen+1)
> || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
> - FAIL(c, dti, "\"name\" property in %s is incorrect (\"%s\" instead"
> - " of base node name)", node->fullpath, prop->val.val);
> + FAIL(c, dti, node, "\"name\" property is incorrect (\"%s\" instead"
> + " of base node name)", prop->val.val);
> } else {
> /* The name property is correct, and therefore redundant.
> * Delete it */
> @@ -561,7 +559,7 @@ static void fixup_phandle_references(struct check *c, struct dt_info *dti,
> refnode = get_node_by_ref(dt, m->ref);
> if (! refnode) {
> if (!(dti->dtsflags & DTSF_PLUGIN))
> - FAIL(c, dti, "Reference to non-existent node or "
> + FAIL(c, dti, node, "Reference to non-existent node or "
> "label \"%s\"\n", m->ref);
> else /* mark the entry as unresolved */
> *((fdt32_t *)(prop->val.val + m->offset)) =
> @@ -593,7 +591,7 @@ static void fixup_path_references(struct check *c, struct dt_info *dti,
>
> refnode = get_node_by_ref(dt, m->ref);
> if (!refnode) {
> - FAIL(c, dti, "Reference to non-existent node or label \"%s\"\n",
> + FAIL(c, dti, node, "Reference to non-existent node or label \"%s\"\n",
> m->ref);
> continue;
> }
> @@ -646,12 +644,12 @@ static void check_alias_paths(struct check *c, struct dt_info *dti,
>
> for_each_property(node, prop) {
> if (!prop->val.val || !get_node_by_path(dti->dt, prop->val.val)) {
> - FAIL(c, dti, "aliases property '%s' is not a valid node (%s)",
> + FAIL(c, dti, node, "aliases property '%s' is not a valid node (%s)",
> prop->name, prop->val.val);
> continue;
> }
> if (strspn(prop->name, LOWERCASE DIGITS "-") != strlen(prop->name))
> - FAIL(c, dti, "aliases property name '%s' is not valid",
> + FAIL(c, dti, node, "aliases property name '%s' is not valid",
> prop->name);
>
> }
> @@ -693,21 +691,21 @@ static void check_reg_format(struct check *c, struct dt_info *dti,
> return; /* No "reg", that's fine */
>
> if (!node->parent) {
> - FAIL(c, dti, "Root node has a \"reg\" property");
> + FAIL(c, dti, node, "Root node has a \"reg\" property");
> return;
> }
>
> if (prop->val.len == 0)
> - FAIL(c, dti, "\"reg\" property in %s is empty", node->fullpath);
> + FAIL(c, dti, node, "\"reg\" property is empty");
>
> addr_cells = node_addr_cells(node->parent);
> size_cells = node_size_cells(node->parent);
> entrylen = (addr_cells + size_cells) * sizeof(cell_t);
>
> if (!entrylen || (prop->val.len % entrylen) != 0)
> - FAIL(c, dti, "\"reg\" property in %s has invalid length (%d bytes) "
> + FAIL(c, dti, node, "\"reg\" property has invalid length (%d bytes) "
> "(#address-cells == %d, #size-cells == %d)",
> - node->fullpath, prop->val.len, addr_cells, size_cells);
> + prop->val.len, addr_cells, size_cells);
> }
> WARNING(reg_format, check_reg_format, NULL, &addr_size_cells);
>
> @@ -722,7 +720,7 @@ static void check_ranges_format(struct check *c, struct dt_info *dti,
> return;
>
> if (!node->parent) {
> - FAIL(c, dti, "Root node has a \"ranges\" property");
> + FAIL(c, dti, node, "Root node has a \"ranges\" property");
> return;
> }
>
> @@ -734,19 +732,19 @@ static void check_ranges_format(struct check *c, struct dt_info *dti,
>
> if (prop->val.len == 0) {
> if (p_addr_cells != c_addr_cells)
> - FAIL(c, dti, "%s has empty \"ranges\" property but its "
> + FAIL(c, dti, node, "empty \"ranges\" property but its "
> "#address-cells (%d) differs from %s (%d)",
> - node->fullpath, c_addr_cells, node->parent->fullpath,
> + c_addr_cells, node->parent->fullpath,
> p_addr_cells);
> if (p_size_cells != c_size_cells)
> - FAIL(c, dti, "%s has empty \"ranges\" property but its "
> + FAIL(c, dti, node, "empty \"ranges\" property but its "
> "#size-cells (%d) differs from %s (%d)",
> - node->fullpath, c_size_cells, node->parent->fullpath,
> + c_size_cells, node->parent->fullpath,
> p_size_cells);
> } else if ((prop->val.len % entrylen) != 0) {
> - FAIL(c, dti, "\"ranges\" property in %s has invalid length (%d bytes) "
> + FAIL(c, dti, node, "\"ranges\" property has invalid length (%d bytes) "
> "(parent #address-cells == %d, child #address-cells == %d, "
> - "#size-cells == %d)", node->fullpath, prop->val.len,
> + "#size-cells == %d)", prop->val.len,
> p_addr_cells, c_addr_cells, c_size_cells);
> }
> }
> @@ -769,39 +767,31 @@ static void check_pci_bridge(struct check *c, struct dt_info *dti, struct node *
>
> if (!strprefixeq(node->name, node->basenamelen, "pci") &&
> !strprefixeq(node->name, node->basenamelen, "pcie"))
> - FAIL(c, dti, "Node %s node name is not \"pci\" or \"pcie\"",
> - node->fullpath);
> + FAIL(c, dti, node, "node name is not \"pci\" or \"pcie\"");
>
> prop = get_property(node, "ranges");
> if (!prop)
> - FAIL(c, dti, "Node %s missing ranges for PCI bridge (or not a bridge)",
> - node->fullpath);
> + FAIL(c, dti, node, "missing ranges for PCI bridge (or not a bridge)");
>
> if (node_addr_cells(node) != 3)
> - FAIL(c, dti, "Node %s incorrect #address-cells for PCI bridge",
> - node->fullpath);
> + FAIL(c, dti, node, "incorrect #address-cells for PCI bridge");
> if (node_size_cells(node) != 2)
> - FAIL(c, dti, "Node %s incorrect #size-cells for PCI bridge",
> - node->fullpath);
> + FAIL(c, dti, node, "incorrect #size-cells for PCI bridge");
>
> prop = get_property(node, "bus-range");
> if (!prop) {
> - FAIL(c, dti, "Node %s missing bus-range for PCI bridge",
> - node->fullpath);
> + FAIL(c, dti, node, "missing bus-range for PCI bridge");
> return;
> }
> if (prop->val.len != (sizeof(cell_t) * 2)) {
> - FAIL(c, dti, "Node %s bus-range must be 2 cells",
> - node->fullpath);
> + FAIL(c, dti, node, "bus-range must be 2 cells");
> return;
> }
> cells = (cell_t *)prop->val.val;
> if (fdt32_to_cpu(cells[0]) > fdt32_to_cpu(cells[1]))
> - FAIL(c, dti, "Node %s bus-range 1st cell must be less than or equal to 2nd cell",
> - node->fullpath);
> + FAIL(c, dti, node, "bus-range 1st cell must be less than or equal to 2nd cell");
> if (fdt32_to_cpu(cells[1]) > 0xff)
> - FAIL(c, dti, "Node %s bus-range maximum bus number must be less than 256",
> - node->fullpath);
> + FAIL(c, dti, node, "bus-range maximum bus number must be less than 256");
> }
> WARNING(pci_bridge, check_pci_bridge, NULL,
> &device_type_is_string, &addr_size_cells);
> @@ -831,8 +821,8 @@ static void check_pci_device_bus_num(struct check *c, struct dt_info *dti, struc
> max_bus = fdt32_to_cpu(cells[0]);
> }
> if ((bus_num < min_bus) || (bus_num > max_bus))
> - FAIL(c, dti, "Node %s PCI bus number %d out of range, expected (%d - %d)",
> - node->fullpath, bus_num, min_bus, max_bus);
> + FAIL(c, dti, node, "PCI bus number %d out of range, expected (%d - %d)",
> + bus_num, min_bus, max_bus);
> }
> WARNING(pci_device_bus_num, check_pci_device_bus_num, NULL, ®_format, &pci_bridge);
>
> @@ -849,25 +839,22 @@ static void check_pci_device_reg(struct check *c, struct dt_info *dti, struct no
>
> prop = get_property(node, "reg");
> if (!prop) {
> - FAIL(c, dti, "Node %s missing PCI reg property", node->fullpath);
> + FAIL(c, dti, node, "missing PCI reg property");
> return;
> }
>
> cells = (cell_t *)prop->val.val;
> if (cells[1] || cells[2])
> - FAIL(c, dti, "Node %s PCI reg config space address cells 2 and 3 must be 0",
> - node->fullpath);
> + FAIL(c, dti, node, "PCI reg config space address cells 2 and 3 must be 0");
>
> reg = fdt32_to_cpu(cells[0]);
> dev = (reg & 0xf800) >> 11;
> func = (reg & 0x700) >> 8;
>
> if (reg & 0xff000000)
> - FAIL(c, dti, "Node %s PCI reg address is not configuration space",
> - node->fullpath);
> + FAIL(c, dti, node, "PCI reg address is not configuration space");
> if (reg & 0x000000ff)
> - FAIL(c, dti, "Node %s PCI reg config space address register number must be 0",
> - node->fullpath);
> + FAIL(c, dti, node, "PCI reg config space address register number must be 0");
>
> if (func == 0) {
> snprintf(unit_addr, sizeof(unit_addr), "%x", dev);
> @@ -879,8 +866,8 @@ static void check_pci_device_reg(struct check *c, struct dt_info *dti, struct no
> if (streq(unitname, unit_addr))
> return;
>
> - FAIL(c, dti, "Node %s PCI unit address format error, expected \"%s\"",
> - node->fullpath, unit_addr);
> + FAIL(c, dti, node, "PCI unit address format error, expected \"%s\"",
> + unit_addr);
> }
> WARNING(pci_device_reg, check_pci_device_reg, NULL, ®_format, &pci_bridge);
>
> @@ -936,7 +923,7 @@ static void check_simple_bus_reg(struct check *c, struct dt_info *dti, struct no
>
> if (!cells) {
> if (node->parent->parent && !(node->bus == &simple_bus))
> - FAIL(c, dti, "Node %s missing or empty reg/ranges property", node->fullpath);
> + FAIL(c, dti, node, "missing or empty reg/ranges property");
> return;
> }
>
> @@ -946,8 +933,8 @@ static void check_simple_bus_reg(struct check *c, struct dt_info *dti, struct no
>
> snprintf(unit_addr, sizeof(unit_addr), "%"PRIx64, reg);
> if (!streq(unitname, unit_addr))
> - FAIL(c, dti, "Node %s simple-bus unit address format error, expected \"%s\"",
> - node->fullpath, unit_addr);
> + FAIL(c, dti, node, "simple-bus unit address format error, expected \"%s\"",
> + unit_addr);
> }
> WARNING(simple_bus_reg, check_simple_bus_reg, NULL, ®_format, &simple_bus_bridge);
>
> @@ -963,14 +950,12 @@ static void check_unit_address_format(struct check *c, struct dt_info *dti,
> return;
>
> if (!strncmp(unitname, "0x", 2)) {
> - FAIL(c, dti, "Node %s unit name should not have leading \"0x\"",
> - node->fullpath);
> + FAIL(c, dti, node, "unit name should not have leading \"0x\"");
> /* skip over 0x for next test */
> unitname += 2;
> }
> if (unitname[0] == '0' && isxdigit(unitname[1]))
> - FAIL(c, dti, "Node %s unit name should not have leading 0s",
> - node->fullpath);
> + FAIL(c, dti, node, "unit name should not have leading 0s");
> }
> WARNING(unit_address_format, check_unit_address_format, NULL,
> &node_name_format, &pci_bridge, &simple_bus_bridge);
> @@ -993,12 +978,10 @@ static void check_avoid_default_addr_size(struct check *c, struct dt_info *dti,
> return;
>
> if (node->parent->addr_cells == -1)
> - FAIL(c, dti, "Relying on default #address-cells value for %s",
> - node->fullpath);
> + FAIL(c, dti, node, "Relying on default #address-cells value");
>
> if (node->parent->size_cells == -1)
> - FAIL(c, dti, "Relying on default #size-cells value for %s",
> - node->fullpath);
> + FAIL(c, dti, node, "Relying on default #size-cells value");
> }
> WARNING(avoid_default_addr_size, check_avoid_default_addr_size, NULL,
> &addr_size_cells);
> @@ -1023,8 +1006,7 @@ static void check_avoid_unnecessary_addr_size(struct check *c, struct dt_info *d
> }
>
> if (!has_reg)
> - FAIL(c, dti, "unnecessary #address-cells/#size-cells without \"ranges\" or child \"reg\" property in %s",
> - node->fullpath);
> + FAIL(c, dti, node, "unnecessary #address-cells/#size-cells without \"ranges\" or child \"reg\" property");
> }
> WARNING(avoid_unnecessary_addr_size, check_avoid_unnecessary_addr_size, NULL, &avoid_default_addr_size);
>
> @@ -1046,7 +1028,7 @@ static void check_obsolete_chosen_interrupt_controller(struct check *c,
>
> prop = get_property(chosen, "interrupt-controller");
> if (prop)
> - FAIL(c, dti, "/chosen has obsolete \"interrupt-controller\" "
> + FAIL(c, dti, node, "/chosen has obsolete \"interrupt-controller\" "
> "property");
> }
> WARNING(obsolete_chosen_interrupt_controller,
> @@ -1059,8 +1041,7 @@ static void check_chosen_node_is_root(struct check *c, struct dt_info *dti,
> return;
>
> if (node->parent != dti->dt)
> - FAIL(c, dti, "chosen node '%s' must be at root node",
> - node->fullpath);
> + FAIL(c, dti, node, "chosen node must be at root node");
> }
> WARNING(chosen_node_is_root, check_chosen_node_is_root, NULL);
>
> @@ -1094,7 +1075,7 @@ static void check_chosen_node_stdout_path(struct check *c, struct dt_info *dti,
> prop = get_property(node, "linux,stdout-path");
> if (!prop)
> return;
> - FAIL(c, dti, "Use 'stdout-path' instead of 'linux,stdout-path'");
> + FAIL(c, dti, node, "Use 'stdout-path' instead of 'linux,stdout-path'");
> }
>
> c->data = prop->name;
> @@ -1118,8 +1099,8 @@ static void check_property_phandle_args(struct check *c,
> int cell, cellsize = 0;
>
> if (prop->val.len % sizeof(cell_t)) {
> - FAIL(c, dti, "property '%s' size (%d) is invalid, expected multiple of %zu in node %s",
> - prop->name, prop->val.len, sizeof(cell_t), node->fullpath);
> + FAIL(c, dti, node, "property '%s' size (%d) is invalid, expected multiple of %zu",
> + prop->name, prop->val.len, sizeof(cell_t));
> return;
> }
>
> @@ -1150,14 +1131,14 @@ static void check_property_phandle_args(struct check *c,
> break;
> }
> if (!m)
> - FAIL(c, dti, "Property '%s', cell %d is not a phandle reference in %s",
> - prop->name, cell, node->fullpath);
> + FAIL(c, dti, node, "Property '%s', cell %d is not a phandle reference",
> + prop->name, cell);
> }
>
> provider_node = get_node_by_phandle(root, phandle);
> if (!provider_node) {
> - FAIL(c, dti, "Could not get phandle node for %s:%s(cell %d)",
> - node->fullpath, prop->name, cell);
> + FAIL(c, dti, node, "Could not get phandle node for %s(cell %d)",
> + prop->name, cell);
> break;
> }
>
> @@ -1167,16 +1148,16 @@ static void check_property_phandle_args(struct check *c,
> } else if (provider->optional) {
> cellsize = 0;
> } else {
> - FAIL(c, dti, "Missing property '%s' in node %s or bad phandle (referred from %s:%s[%d])",
> + FAIL(c, dti, node, "Missing property '%s' in node %s or bad phandle (referred from %s[%d])",
> provider->cell_name,
> provider_node->fullpath,
> - node->fullpath, prop->name, cell);
> + prop->name, cell);
> break;
> }
>
> if (prop->val.len < ((cell + cellsize + 1) * sizeof(cell_t))) {
> - FAIL(c, dti, "%s property size (%d) too small for cell size %d in %s",
> - prop->name, prop->val.len, cellsize, node->fullpath);
> + FAIL(c, dti, node, "%s property size (%d) too small for cell size %d",
> + prop->name, prop->val.len, cellsize);
> }
> }
> }
> @@ -1278,8 +1259,8 @@ static void check_deprecated_gpio_property(struct check *c,
> if (!streq(str, "gpio"))
> continue;
>
> - FAIL(c, dti, "'[*-]gpio' is deprecated, use '[*-]gpios' instead for %s:%s",
> - node->fullpath, prop->name);
> + FAIL(c, dti, node, "'[*-]gpio' is deprecated, use '[*-]gpios' instead for %s",
> + prop->name);
> }
>
> }
> @@ -1313,9 +1294,8 @@ static void check_interrupts_property(struct check *c,
> return;
>
> if (irq_prop->val.len % sizeof(cell_t))
> - FAIL(c, dti, "property '%s' size (%d) is invalid, expected multiple of %zu in node %s",
> - irq_prop->name, irq_prop->val.len, sizeof(cell_t),
> - node->fullpath);
> + FAIL(c, dti, node, "property '%s' size (%d) is invalid, expected multiple of %zu",
> + irq_prop->name, irq_prop->val.len, sizeof(cell_t));
>
> while (parent && !prop) {
> if (parent != node && node_is_interrupt_provider(parent)) {
> @@ -1333,14 +1313,12 @@ static void check_interrupts_property(struct check *c,
>
> irq_node = get_node_by_phandle(root, phandle);
> if (!irq_node) {
> - FAIL(c, dti, "Bad interrupt-parent phandle for %s",
> - node->fullpath);
> + FAIL(c, dti, node, "Bad interrupt-parent phandle");
> return;
> }
> if (!node_is_interrupt_provider(irq_node))
> - FAIL(c, dti,
> - "Missing interrupt-controller or interrupt-map property in %s",
> - irq_node->fullpath);
> + FAIL(c, dti, irq_node,
> + "Missing interrupt-controller or interrupt-map property");
>
> break;
> }
> @@ -1349,23 +1327,21 @@ static void check_interrupts_property(struct check *c,
> }
>
> if (!irq_node) {
> - FAIL(c, dti, "Missing interrupt-parent for %s", node->fullpath);
> + FAIL(c, dti, node, "Missing interrupt-parent");
> return;
> }
>
> prop = get_property(irq_node, "#interrupt-cells");
> if (!prop) {
> - FAIL(c, dti, "Missing #interrupt-cells in interrupt-parent %s",
> - irq_node->fullpath);
> + FAIL(c, dti, irq_node, "Missing #interrupt-cells in interrupt-parent");
> return;
> }
>
> irq_cells = propval_cell(prop);
> if (irq_prop->val.len % (irq_cells * sizeof(cell_t))) {
> - FAIL(c, dti,
> - "interrupts size is (%d), expected multiple of %d in %s",
> - irq_prop->val.len, (int)(irq_cells * sizeof(cell_t)),
> - node->fullpath);
> + FAIL(c, dti, node,
> + "interrupts size is (%d), expected multiple of %d",
> + irq_prop->val.len, (int)(irq_cells * sizeof(cell_t)));
> }
> }
> WARNING(interrupts_property, check_interrupts_property, &phandle_references);
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-02-09 6:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 14:57 [PATCH 0/3] checks: failure message improvements Rob Herring
[not found] ` <20180131145705.21335-1-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2018-01-31 14:57 ` [PATCH 1/3] checks: centralize printing of node path in check_msg Rob Herring
[not found] ` <20180131145705.21335-2-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2018-02-09 6:53 ` David Gibson [this message]
2018-01-31 14:57 ` [PATCH 2/3] checks: centralize printing of property names in failure messages Rob Herring
[not found] ` <20180131145705.21335-3-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2018-02-10 1:09 ` David Gibson
2018-01-31 14:57 ` [PATCH 3/3] checks: Use source position information for check failures Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180209065318.GI11634@umbus.fritz.box \
--to=david-xt8fgy+axnrb3ne2bgzf6laj5h9x9tb+@public.gmane.org \
--cc=Julia.Lawall-L2FTfq7BK8M@public.gmane.org \
--cc=devicetree-compiler-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).