Re: [PATCH v4 13/20] multipath -u: treat failed wwids as invalid

["Benjamin Marzinski" <bmarzins@redhat.com>]

On Wed, Apr 04, 2018 at 06:16:20PM +0200, Martin Wilck wrote:
> If a WWID has been marked as "failed", don't treat it as "valid multipath
> device path" in multipath -c/-u. This is key to achieve consistency between
> multipathd and udev rule processing.
> 

Like I said, this isn't a definitive check for multipathd failure, but
it will help, so

Reviewed-by: Benjamin Marzinski <benmarz@gmail.com>
> Signed-off-by: Martin Wilck <mwilck@suse.com>
> ---
>  multipath/main.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/multipath/main.c b/multipath/main.c
> index 59a72ed..942caf4 100644
> --- a/multipath/main.c
> +++ b/multipath/main.c
> @@ -450,8 +450,12 @@ configure (struct config *conf, enum mpath_cmds cmd,
>  		 * Paths listed in the wwids file are always considered valid.
>  		 */
>  		if (cmd == CMD_VALID_PATH) {
> -			if ((!find_multipaths_on(conf) && ignore_wwids_on(conf))
> -			    || check_wwids_file(refwwid, 0) == 0)
> +			if (is_failed_wwid(refwwid) == WWID_IS_FAILED) {
> +				r = 1;
> +				goto print_valid;
> +			} else if ((!find_multipaths_on(conf) &&
> +				    ignore_wwids_on(conf)) ||
> +				   check_wwids_file(refwwid, 0) == 0)
>  				r = 0;
>  			if (r == 0 ||
>  			    !find_multipaths_on(conf) ||
> -- 
> 2.16.1