From: Muneendra <muneendra.kumar@broadcom.com>
To: dm-devel@redhat.com
Cc: muneendra.kumar@broadcom.com
Subject: [PATCH] Update in the description of marginal_path_err_rate_threshold
Date: Mon, 28 May 2018 02:25:51 -0700 [thread overview]
Message-ID: <20180528092551.16131-1-muneendra.kumar@broadcom.com> (raw)
The multipath.conf.5 description of marginal_path_err_rate_threshold,
states that the path will not reinstate for
\fImarginal_path_err_recheck_gap_time\fR seconds,
where it should be marginal_path_err_recheck_gap_time seconds.
Signed-off-by: Muneendra <muneendra.kumar@broadcom.com>
---
multipath/multipath.conf.5 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index f689795..9f58520 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -900,7 +900,7 @@ The error rate threshold as a permillage (1/1000). One of the four parameters
of supporting path check based on accounting IO error such as intermittent
error. Refer to \fImarginal_path_err_sample_time\fR. If the rate of IO errors
on a particular path is greater than this parameter, then the path will not
-reinstate for \fImarginal_path_err_rate_threshold\fR seconds unless there is
+reinstate for \fImarginal_path_err_recheck_gap_time\fR seconds unless there is
only one active path.
.RS
.TP
--
1.8.3.1
reply other threads:[~2018-05-28 9:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180528092551.16131-1-muneendra.kumar@broadcom.com \
--to=muneendra.kumar@broadcom.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox